upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
177 lines
3.9 KiB
177 lines
3.9 KiB
/*
|
|
* U-boot - main board file
|
|
*
|
|
* Copyright (c) 2008-2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <command.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <spi.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/net.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach-common/bits/otp.h>
|
|
#include <asm/sdh.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: ADI BF518F EZ-Board board\n");
|
|
printf(" Support: http://blackfin.uclinux.org/\n");
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_BFIN_MAC)
|
|
static void board_init_enetaddr(uchar *mac_addr)
|
|
{
|
|
#ifdef CONFIG_SYS_NO_FLASH
|
|
# define USE_MAC_IN_FLASH 0
|
|
#else
|
|
# define USE_MAC_IN_FLASH 1
|
|
#endif
|
|
bool valid_mac = false;
|
|
|
|
if (USE_MAC_IN_FLASH) {
|
|
/* we cram the MAC in the last flash sector */
|
|
uchar *board_mac_addr = (uchar *)0x203F0096;
|
|
if (is_valid_ether_addr(board_mac_addr)) {
|
|
memcpy(mac_addr, board_mac_addr, 6);
|
|
valid_mac = true;
|
|
}
|
|
}
|
|
|
|
if (!valid_mac) {
|
|
puts("Warning: Generating 'random' MAC address\n");
|
|
bfin_gen_rand_mac(mac_addr);
|
|
}
|
|
|
|
eth_setenv_enetaddr("ethaddr", mac_addr);
|
|
}
|
|
|
|
/* Only the first run of boards had a KSZ switch */
|
|
#if defined(CONFIG_BFIN_SPI) && __SILICON_REVISION__ == 0
|
|
# define KSZ_POSSIBLE 1
|
|
#else
|
|
# define KSZ_POSSIBLE 0
|
|
#endif
|
|
|
|
#define KSZ_MAX_HZ 5000000
|
|
|
|
#define KSZ_WRITE 0x02
|
|
#define KSZ_READ 0x03
|
|
|
|
#define KSZ_REG_CHID 0x00 /* Register 0: Chip ID0 */
|
|
#define KSZ_REG_STPID 0x01 /* Register 1: Chip ID1 / Start Switch */
|
|
#define KSZ_REG_GC9 0x0b /* Register 11: Global Control 9 */
|
|
#define KSZ_REG_P3C0 0x30 /* Register 48: Port 3 Control 0 */
|
|
|
|
static int ksz8893m_transfer(struct spi_slave *slave, uchar dir, uchar reg,
|
|
uchar data, uchar result[3])
|
|
{
|
|
unsigned char dout[3] = { dir, reg, data, };
|
|
return spi_xfer(slave, sizeof(dout) * 8, dout, result, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
static int ksz8893m_reg_set(struct spi_slave *slave, uchar reg, uchar data)
|
|
{
|
|
unsigned char din[3];
|
|
return ksz8893m_transfer(slave, KSZ_WRITE, reg, data, din);
|
|
}
|
|
|
|
static int ksz8893m_reg_read(struct spi_slave *slave, uchar reg)
|
|
{
|
|
int ret;
|
|
unsigned char din[3];
|
|
ret = ksz8893m_transfer(slave, KSZ_READ, reg, 0, din);
|
|
return ret ? ret : din[2];
|
|
}
|
|
|
|
static int ksz8893m_reg_clear(struct spi_slave *slave, uchar reg, uchar mask)
|
|
{
|
|
return ksz8893m_reg_set(slave, reg, ksz8893m_reg_read(slave, reg) & mask);
|
|
}
|
|
|
|
static int ksz8893m_reset(struct spi_slave *slave)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Disable STPID mode */
|
|
ret |= ksz8893m_reg_clear(slave, KSZ_REG_GC9, 0x01);
|
|
|
|
/* Disable VLAN tag insert on Port3 */
|
|
ret |= ksz8893m_reg_clear(slave, KSZ_REG_P3C0, 0x04);
|
|
|
|
/* Start switch */
|
|
ret |= ksz8893m_reg_set(slave, KSZ_REG_STPID, 0x01);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool board_ksz_init(void)
|
|
{
|
|
static bool switch_is_alive = false;
|
|
|
|
if (!switch_is_alive) {
|
|
struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3);
|
|
if (slave) {
|
|
if (!spi_claim_bus(slave)) {
|
|
bool phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
|
|
int ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
|
|
switch_is_alive = (ret == 0);
|
|
spi_release_bus(slave);
|
|
}
|
|
spi_free_slave(slave);
|
|
}
|
|
}
|
|
|
|
return switch_is_alive;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
if (KSZ_POSSIBLE) {
|
|
if (!board_ksz_init())
|
|
return 0;
|
|
}
|
|
return bfin_EMAC_initialize(bis);
|
|
}
|
|
#endif
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_BFIN_MAC
|
|
uchar enetaddr[6];
|
|
if (!eth_getenv_enetaddr("ethaddr", enetaddr))
|
|
board_init_enetaddr(enetaddr);
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
/* we use the last sector for the MAC address / POST LDR */
|
|
extern flash_info_t flash_info[];
|
|
flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* connect async banks by default */
|
|
const unsigned short pins[] = {
|
|
P_AMS2, P_AMS3, 0,
|
|
};
|
|
return peripheral_request_list(pins, "async");
|
|
}
|
|
|
|
#ifdef CONFIG_BFIN_SDH
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return bfin_mmc_init(bis);
|
|
}
|
|
#endif
|
|
|