upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
157 lines
4.2 KiB
157 lines
4.2 KiB
/*
|
|
* Copyright (C) 2008 Miromico AG
|
|
*
|
|
* Configuration settings for the Miromico Hammerhead AVR32 board
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_AT32AP
|
|
#define CONFIG_AT32AP7000
|
|
#define CONFIG_HAMMERHEAD
|
|
|
|
/*
|
|
* Set up the PLL to run at 125 MHz, the CPU to run at the PLL
|
|
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
|
|
* and the PBA bus to run at 1/4 the PLL frequency.
|
|
*/
|
|
#define CONFIG_PLL
|
|
#define CONFIG_SYS_POWER_MANAGER
|
|
#define CONFIG_SYS_OSC0_HZ 25000000
|
|
#define CONFIG_SYS_PLL0_DIV 1
|
|
#define CONFIG_SYS_PLL0_MUL 5
|
|
#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
|
|
#define CONFIG_SYS_CLKDIV_CPU 0
|
|
#define CONFIG_SYS_CLKDIV_HSB 1
|
|
#define CONFIG_SYS_CLKDIV_PBA 2
|
|
#define CONFIG_SYS_CLKDIV_PBB 1
|
|
|
|
/* Reserve VM regions for SDRAM and NOR flash */
|
|
#define CONFIG_SYS_NR_VM_REGIONS 2
|
|
|
|
/*
|
|
* The PLLOPT register controls the PLL like this:
|
|
* icp = PLLOPT<2>
|
|
* ivco = PLLOPT<1:0>
|
|
*
|
|
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
|
|
*/
|
|
#define CONFIG_SYS_PLL0_OPT 0x04
|
|
|
|
#define CONFIG_USART_BASE ATMEL_BASE_USART1
|
|
#define CONFIG_USART_ID 1
|
|
|
|
#define CONFIG_HOSTNAME hammerhead
|
|
|
|
/* User serviceable stuff */
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#define CONFIG_STACKSIZE (2048)
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_BOOTARGS \
|
|
"console=ttyS0 root=mtd1 rootfstype=jffs2"
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"fsload; bootm"
|
|
|
|
/*
|
|
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
|
|
* data on the serial line may interrupt the boot sequence.
|
|
*/
|
|
#define CONFIG_BOOTDELAY 1
|
|
#define CONFIG_AUTOBOOT
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
|
|
/*
|
|
* After booting the board for the first time, new ethernet address
|
|
* should be generated and assigned to the environment variables
|
|
* "ethaddr". This is normally done during production.
|
|
*/
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
|
|
/*
|
|
* BOOTP/DHCP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MMC
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_SETGETDCR
|
|
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_MACB
|
|
#define CONFIG_PORTMUX_PIO
|
|
#define CONFIG_SYS_NR_PIOS 5
|
|
#define CONFIG_SYS_HSDRAMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_ATMEL_MCI
|
|
#define CONFIG_GENERIC_MMC
|
|
|
|
#define CONFIG_SYS_DCACHE_LINESZ 32
|
|
#define CONFIG_SYS_ICACHE_LINESZ 32
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x800000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 135
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
|
|
#define CONFIG_SYS_INTRAM_BASE 0x24000000
|
|
#define CONFIG_SYS_INTRAM_SIZE 0x8000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x10000000
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SIZE 65536
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (256*1024)
|
|
|
|
|
|
/* Allow 4MB for the kernel run-time image */
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000)
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
|
|
|
|
/* Other configuration settings that shouldn't have to change all that often */
|
|
#define CONFIG_SYS_PROMPT "Hammerhead> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
|
|
|
|
#endif /* __CONFIG_H */
|
|
|