upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/samsung/origen/lowlevel_init.S

362 lines
7.7 KiB

/*
* Lowlevel setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
#include "origen_setup.h"
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =EXYNOS4_GPIO_PART1_BASE
ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* LPA wakeup reset */
ldr r2, =S5P_CHECK_LPA
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
/* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =CLK_SRC_CPU_VAL
ldr r2, =CLK_SRC_CPU_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =CLK_SRC_TOP0_VAL
ldr r2, =CLK_SRC_TOP0_OFFSET
str r1, [r0, r2]
ldr r1, =CLK_SRC_TOP1_VAL
ldr r2, =CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =CLK_SRC_DMC_VAL
ldr r2, =CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =CLK_SRC_LEFTBUS_VAL
ldr r2, =CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =CLK_SRC_RIGHTBUS_VAL
ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =CLK_SRC_FSYS_VAL
ldr r2, =CLK_SRC_FSYS_OFFSET
str r1, [r0, r2]
/* UART[0:4] */
ldr r1, =CLK_SRC_PERIL0_VAL
ldr r2, =CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* FIMD0 */
ldr r1, =CLK_SRC_LCD0_VAL
ldr r2, =CLK_SRC_LCD0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/* CLK_DIV_CPU0 */
ldr r1, =CLK_DIV_CPU0_VAL
ldr r2, =CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1 */
ldr r1, =CLK_DIV_CPU1_VAL
ldr r2, =CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_DMC0 */
ldr r1, =CLK_DIV_DMC0_VAL
ldr r2, =CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*CLK_DIV_DMC1 */
ldr r1, =CLK_DIV_DMC1_VAL
ldr r2, =CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_LEFTBUS */
ldr r1, =CLK_DIV_LEFTBUS_VAL
ldr r2, =CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_RIGHTBUS */
ldr r1, =CLK_DIV_RIGHTBUS_VAL
ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_TOP */
ldr r1, =CLK_DIV_TOP_VAL
ldr r2, =CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS1_OFFSET
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS2_OFFSET
str r1, [r0, r2]
/* MMC4 */
ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS3_OFFSET
str r1, [r0, r2]
/* CLK_DIV_PERIL0: UART Clock Divisors */
ldr r1, =CLK_DIV_PERIL0_VAL
ldr r2, =CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =PLL_LOCKTIME
ldr r2, =APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =VPLL_LOCK_OFFSET
str r1, [r0, r2]
/* APLL_CON1 */
ldr r1, =APLL_CON1_VAL
ldr r2, =APLL_CON1_OFFSET
str r1, [r0, r2]
/* APLL_CON0 */
ldr r1, =APLL_CON0_VAL
ldr r2, =APLL_CON0_OFFSET
str r1, [r0, r2]
/* MPLL_CON1 */
ldr r1, =MPLL_CON1_VAL
ldr r2, =MPLL_CON1_OFFSET
str r1, [r0, r2]
/* MPLL_CON0 */
ldr r1, =MPLL_CON0_VAL
ldr r2, =MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =EPLL_CON1_VAL
ldr r2, =EPLL_CON1_OFFSET
str r1, [r0, r2]
/* EPLL_CON0 */
ldr r1, =EPLL_CON0_VAL
ldr r2, =EPLL_CON0_OFFSET
str r1, [r0, r2]
/* VPLL_CON1 */
ldr r1, =VPLL_CON1_VAL
ldr r2, =VPLL_CON1_OFFSET
str r1, [r0, r2]
/* VPLL_CON0 */
ldr r1, =VPLL_CON0_VAL
ldr r2, =VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
4: subs r1, r1, #1
bne 4b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =EXYNOS4_GPIO_A0_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
ldr r1, =EXYNOS4_GPIO_A1_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
ldr r0, =EXYNOS4_UART_BASE
add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL
str r1, [r0, #ULCON_OFFSET]
ldr r1, =UCON_VAL
str r1, [r0, #UCON_OFFSET]
ldr r1, =UFCON_VAL
str r1, [r0, #UFCON_OFFSET]
ldr r1, =UBRDIV_VAL
str r1, [r0, #UBRDIV_OFFSET]
ldr r1, =UFRACVAL_VAL
str r1, [r0, #UFRACVAL_OFFSET]
mov pc, lr
nop
nop
nop
/* Setting TZPC[TrustZone Protection Controller] */
tzpc_init:
ldr r0, =TZPC0_BASE
mov r1, #R0SIZE
str r1, [r0]
mov r1, #DECPROTXSET
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
ldr r0, =TZPC1_BASE
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
ldr r0, =TZPC2_BASE
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
ldr r0, =TZPC3_BASE
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
ldr r0, =TZPC4_BASE
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
ldr r0, =TZPC5_BASE
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
mov pc, lr