upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
394 lines
11 KiB
394 lines
11 KiB
/*
|
|
* (C) Copyright 2000-2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <asm/processor.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#endif
|
|
|
|
|
|
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
|
|
|
|
#ifdef CFG_INIT_DCACHE_CS
|
|
# if (CFG_INIT_DCACHE_CS == 0)
|
|
# define PBxAP pb0ap
|
|
# define PBxCR pb0cr
|
|
# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
|
|
# define PBxAP_VAL CFG_EBC_PB0AP
|
|
# define PBxCR_VAL CFG_EBC_PB0CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 1)
|
|
# define PBxAP pb1ap
|
|
# define PBxCR pb1cr
|
|
# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
|
|
# define PBxAP_VAL CFG_EBC_PB1AP
|
|
# define PBxCR_VAL CFG_EBC_PB1CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 2)
|
|
# define PBxAP pb2ap
|
|
# define PBxCR pb2cr
|
|
# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
|
|
# define PBxAP_VAL CFG_EBC_PB2AP
|
|
# define PBxCR_VAL CFG_EBC_PB2CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 3)
|
|
# define PBxAP pb3ap
|
|
# define PBxCR pb3cr
|
|
# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
|
|
# define PBxAP_VAL CFG_EBC_PB3AP
|
|
# define PBxCR_VAL CFG_EBC_PB3CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 4)
|
|
# define PBxAP pb4ap
|
|
# define PBxCR pb4cr
|
|
# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
|
|
# define PBxAP_VAL CFG_EBC_PB4AP
|
|
# define PBxCR_VAL CFG_EBC_PB4CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 5)
|
|
# define PBxAP pb5ap
|
|
# define PBxCR pb5cr
|
|
# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
|
|
# define PBxAP_VAL CFG_EBC_PB5AP
|
|
# define PBxCR_VAL CFG_EBC_PB5CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 6)
|
|
# define PBxAP pb6ap
|
|
# define PBxCR pb6cr
|
|
# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
|
|
# define PBxAP_VAL CFG_EBC_PB6AP
|
|
# define PBxCR_VAL CFG_EBC_PB6CR
|
|
# endif
|
|
# endif
|
|
# if (CFG_INIT_DCACHE_CS == 7)
|
|
# define PBxAP pb7ap
|
|
# define PBxCR pb7cr
|
|
# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
|
|
# define PBxAP_VAL CFG_EBC_PB7AP
|
|
# define PBxCR_VAL CFG_EBC_PB7CR
|
|
# endif
|
|
# endif
|
|
#endif /* CFG_INIT_DCACHE_CS */
|
|
|
|
#if defined(CFG_440_GPIO_TABLE)
|
|
gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_440_GPIO_TABLE;
|
|
|
|
void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_MAX])
|
|
{
|
|
unsigned char i=0, j=0, reg_offset = 0, gpio_core;
|
|
unsigned long gpio_reg, gpio_core_add;
|
|
|
|
for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
|
|
j = 0;
|
|
reg_offset = 0;
|
|
/* GPIO config of the GPIOs 0 to 31 */
|
|
for (i=0; i<GPIO_MAX; i++, j++) {
|
|
if (i == GPIO_MAX/2) {
|
|
reg_offset = 4;
|
|
j = i-16;
|
|
}
|
|
|
|
gpio_core_add = (*gpio_tab)[gpio_core][i].add;
|
|
|
|
if (((*gpio_tab)[gpio_core][i].in_out == GPIO_IN) ||
|
|
((*gpio_tab)[gpio_core][i].in_out == GPIO_BI)) {
|
|
|
|
switch ((*gpio_tab)[gpio_core][i].alt_nb) {
|
|
case GPIO_SEL:
|
|
break;
|
|
|
|
case GPIO_ALT1:
|
|
gpio_reg = in32(GPIO_IS1(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
|
|
out32(GPIO_IS1(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
|
|
case GPIO_ALT2:
|
|
gpio_reg = in32(GPIO_IS2(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
|
|
out32(GPIO_IS2(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
|
|
case GPIO_ALT3:
|
|
gpio_reg = in32(GPIO_IS3(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_IN_SEL >> (j*2));
|
|
out32(GPIO_IS3(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (((*gpio_tab)[gpio_core][i].in_out == GPIO_OUT) ||
|
|
((*gpio_tab)[gpio_core][i].in_out == GPIO_BI)) {
|
|
|
|
switch ((*gpio_tab)[gpio_core][i].alt_nb) {
|
|
case GPIO_SEL:
|
|
if (gpio_core == GPIO0) {
|
|
gpio_reg = in32(GPIO0_TCR) | (0x80000000 >> (j));
|
|
out32(GPIO0_TCR, gpio_reg);
|
|
}
|
|
|
|
if (gpio_core == GPIO1) {
|
|
gpio_reg = in32(GPIO1_TCR) | (0x80000000 >> (j));
|
|
out32(GPIO1_TCR, gpio_reg);
|
|
}
|
|
|
|
gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
|
|
gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
|
|
case GPIO_ALT1:
|
|
gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
|
|
out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
|
|
gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT1_SEL >> (j*2));
|
|
out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
|
|
case GPIO_ALT2:
|
|
gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
|
|
out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
|
|
gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT2_SEL >> (j*2));
|
|
out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
|
|
case GPIO_ALT3:
|
|
gpio_reg = in32(GPIO_OS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
|
|
out32(GPIO_OS(gpio_core_add+reg_offset), gpio_reg);
|
|
gpio_reg = in32(GPIO_TS(gpio_core_add+reg_offset))
|
|
& ~(GPIO_MASK >> (j*2));
|
|
gpio_reg = gpio_reg | (GPIO_ALT3_SEL >> (j*2));
|
|
out32(GPIO_TS(gpio_core_add+reg_offset), gpio_reg);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif /* CFG_440_GPIO_TABLE */
|
|
|
|
/*
|
|
* Breath some life into the CPU...
|
|
*
|
|
* Set up the memory map,
|
|
* initialize a bunch of registers
|
|
*/
|
|
void
|
|
cpu_init_f (void)
|
|
{
|
|
#if defined(CONFIG_405EP)
|
|
/*
|
|
* GPIO0 setup (select GPIO or alternate function)
|
|
*/
|
|
#if defined(CFG_GPIO0_OR)
|
|
out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */
|
|
#endif
|
|
#if defined(CFG_GPIO0_ODR)
|
|
out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */
|
|
#endif
|
|
out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
|
|
out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
|
|
out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
|
|
out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
|
|
out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
|
|
out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
|
|
out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
|
|
|
|
/*
|
|
* Set EMAC noise filter bits
|
|
*/
|
|
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
|
|
#endif /* CONFIG_405EP */
|
|
|
|
#if defined(CFG_440_GPIO_TABLE)
|
|
set_chip_gpio_configuration(&gpio_tab);
|
|
#endif /* CFG_440_GPIO_TABLE */
|
|
|
|
/*
|
|
* External Bus Controller (EBC) Setup
|
|
*/
|
|
#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
|
|
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
|
|
defined(CONFIG_405EP) || defined(CONFIG_405))
|
|
/*
|
|
* Move the next instructions into icache, since these modify the flash
|
|
* we are running from!
|
|
*/
|
|
asm volatile(" bl 0f" ::: "lr");
|
|
asm volatile("0: mflr 3" ::: "r3");
|
|
asm volatile(" addi 4, 0, 14" ::: "r4");
|
|
asm volatile(" mtctr 4" ::: "ctr");
|
|
asm volatile("1: icbt 0, 3");
|
|
asm volatile(" addi 3, 3, 32" ::: "r3");
|
|
asm volatile(" bdnz 1b" ::: "ctr", "cr0");
|
|
asm volatile(" addis 3, 0, 0x0" ::: "r3");
|
|
asm volatile(" ori 3, 3, 0xA000" ::: "r3");
|
|
asm volatile(" mtctr 3" ::: "ctr");
|
|
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
|
|
#endif
|
|
|
|
mtebc(pb0ap, CFG_EBC_PB0AP);
|
|
mtebc(pb0cr, CFG_EBC_PB0CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1))
|
|
mtebc(pb1ap, CFG_EBC_PB1AP);
|
|
mtebc(pb1cr, CFG_EBC_PB1CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2))
|
|
mtebc(pb2ap, CFG_EBC_PB2AP);
|
|
mtebc(pb2cr, CFG_EBC_PB2CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3))
|
|
mtebc(pb3ap, CFG_EBC_PB3AP);
|
|
mtebc(pb3cr, CFG_EBC_PB3CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
|
|
mtebc(pb4ap, CFG_EBC_PB4AP);
|
|
mtebc(pb4cr, CFG_EBC_PB4CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5))
|
|
mtebc(pb5ap, CFG_EBC_PB5AP);
|
|
mtebc(pb5cr, CFG_EBC_PB5CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6))
|
|
mtebc(pb6ap, CFG_EBC_PB6AP);
|
|
mtebc(pb6cr, CFG_EBC_PB6CR);
|
|
#endif
|
|
|
|
#if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7))
|
|
mtebc(pb7ap, CFG_EBC_PB7AP);
|
|
mtebc(pb7cr, CFG_EBC_PB7CR);
|
|
#endif
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
unsigned long val;
|
|
|
|
val = mfspr(tcr);
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
|
|
#else
|
|
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
|
|
#endif
|
|
mtspr(tcr, val);
|
|
|
|
val = mfspr(tsr);
|
|
val |= 0x80000000; /* enable watchdog timer */
|
|
mtspr(tsr, val);
|
|
|
|
reset_4xx_watchdog();
|
|
#endif /* CONFIG_WATCHDOG */
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like time base and timers
|
|
*/
|
|
int cpu_init_r (void)
|
|
{
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
bd_t *bd = gd->bd;
|
|
unsigned long reg;
|
|
#if defined(CONFIG_405GP)
|
|
uint pvr = get_pvr();
|
|
#endif
|
|
|
|
#ifdef CFG_INIT_DCACHE_CS
|
|
/*
|
|
* Flush and invalidate dcache, then disable CS for temporary stack.
|
|
* Afterwards, this CS can be used for other purposes
|
|
*/
|
|
dcache_disable(); /* flush and invalidate dcache */
|
|
mtebc(PBxAP, 0);
|
|
mtebc(PBxCR, 0); /* disable CS for temporary stack */
|
|
|
|
#if (defined(PBxAP_VAL) && defined(PBxCR_VAL))
|
|
/*
|
|
* Write new value into CS register
|
|
*/
|
|
mtebc(PBxAP, PBxAP_VAL);
|
|
mtebc(PBxCR, PBxCR_VAL);
|
|
#endif
|
|
#endif /* CFG_INIT_DCACHE_CS */
|
|
|
|
/*
|
|
* Write Ethernetaddress into on-chip register
|
|
*/
|
|
reg = 0x00000000;
|
|
reg |= bd->bi_enetaddr[0]; /* set high address */
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[1];
|
|
out32 (EMAC_IAH, reg);
|
|
|
|
reg = 0x00000000;
|
|
reg |= bd->bi_enetaddr[2]; /* set low address */
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[3];
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[4];
|
|
reg = reg << 8;
|
|
reg |= bd->bi_enetaddr[5];
|
|
out32 (EMAC_IAL, reg);
|
|
|
|
#if defined(CONFIG_405GP)
|
|
/*
|
|
* Set edge conditioning circuitry on PPC405GPr
|
|
* for compatibility to existing PPC405GP designs.
|
|
*/
|
|
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
|
|
mtdcr(ecr, 0x60606000);
|
|
}
|
|
#endif /* defined(CONFIG_405GP) */
|
|
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
|
|
return (0);
|
|
}
|
|
|