upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/qemu-x86.h

77 lines
1.9 KiB

/*
* Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_X86_SERIAL
#define CONFIG_PCI_MEM_BUS 0xc0000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_PREF_BUS 0xd0000000
#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
#define CONFIG_PCI_PREF_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x2000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0xe000
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
#define CONFIG_PCI_PNP
#define CONFIG_E1000
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,vga\0" \
"stdout=serial,vga\0" \
"stderr=serial,vga\0"
/*
* ATA/SATA support for QEMU x86 targets
* - Only legacy IDE controller is supported for QEMU '-M pc' target
* - AHCI controller is supported for QEMU '-M q35' target
*
* Default configuraion is to support the QEMU default x86 target
* Undefine CONFIG_CMD_IDE to support q35 target
*/
#define CONFIG_CMD_IDE
#ifdef CONFIG_CMD_IDE
#define CONFIG_SYS_IDE_MAXBUS 2
#define CONFIG_SYS_IDE_MAXDEVICE 4
#define CONFIG_SYS_ATA_BASE_ADDR 0
#define CONFIG_SYS_ATA_DATA_OFFSET 0
#define CONFIG_SYS_ATA_REG_OFFSET 0
#define CONFIG_SYS_ATA_ALT_OFFSET 0
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
#define CONFIG_ATAPI
#undef CONFIG_SCSI_AHCI
#undef CONFIG_CMD_SCSI
#else
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
#endif
/* GPIO is not supported */
#undef CONFIG_INTEL_ICH6_GPIO
#undef CONFIG_CMD_GPIO
/* SPI is not supported */
#undef CONFIG_ICH_SPI
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_IS_NOWHERE
#endif /* __CONFIG_H */