upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
137 lines
3.6 KiB
137 lines
3.6 KiB
/*
|
|
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
* Scott McNutt <smcnutt@psyent.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <linux/compiler.h>
|
|
#include <serial.h>
|
|
|
|
typedef volatile struct {
|
|
unsigned rxdata; /* Rx data reg */
|
|
unsigned txdata; /* Tx data reg */
|
|
unsigned status; /* Status reg */
|
|
unsigned control; /* Control reg */
|
|
unsigned divisor; /* Baud rate divisor reg */
|
|
unsigned endofpacket; /* End-of-packet reg */
|
|
} nios_uart_t;
|
|
|
|
/* status register */
|
|
#define NIOS_UART_PE (1 << 0) /* parity error */
|
|
#define NIOS_UART_FE (1 << 1) /* frame error */
|
|
#define NIOS_UART_BRK (1 << 2) /* break detect */
|
|
#define NIOS_UART_ROE (1 << 3) /* rx overrun */
|
|
#define NIOS_UART_TOE (1 << 4) /* tx overrun */
|
|
#define NIOS_UART_TMT (1 << 5) /* tx empty */
|
|
#define NIOS_UART_TRDY (1 << 6) /* tx ready */
|
|
#define NIOS_UART_RRDY (1 << 7) /* rx ready */
|
|
#define NIOS_UART_E (1 << 8) /* exception */
|
|
#define NIOS_UART_DCTS (1 << 10) /* cts change */
|
|
#define NIOS_UART_CTS (1 << 11) /* cts */
|
|
#define NIOS_UART_EOP (1 << 12) /* eop detected */
|
|
|
|
/* control register */
|
|
#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/
|
|
#define NIOS_UART_IFE (1 << 1) /* frame error int ena */
|
|
#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */
|
|
#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */
|
|
#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */
|
|
#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */
|
|
#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */
|
|
#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */
|
|
#define NIOS_UART_IE (1 << 8) /* exception int ena */
|
|
#define NIOS_UART_TBRK (1 << 9) /* transmit break */
|
|
#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */
|
|
#define NIOS_UART_RTS (1 << 11) /* rts */
|
|
#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*------------------------------------------------------------------
|
|
* UART the serial port
|
|
*-----------------------------------------------------------------*/
|
|
|
|
static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
|
|
|
|
#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
|
|
|
|
/*
|
|
* Everything's already setup for fixed-baud PTF
|
|
* assignment
|
|
*/
|
|
static void altera_serial_setbrg(void)
|
|
{
|
|
}
|
|
|
|
static int altera_serial_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
static void altera_serial_setbrg(void)
|
|
{
|
|
unsigned div;
|
|
|
|
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
|
|
writel (div, &uart->divisor);
|
|
}
|
|
|
|
static int altera_serial_init(void)
|
|
{
|
|
serial_setbrg();
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* UART CONSOLE
|
|
*---------------------------------------------------------------------*/
|
|
static void altera_serial_putc(char c)
|
|
{
|
|
if (c == '\n')
|
|
serial_putc ('\r');
|
|
while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
|
|
WATCHDOG_RESET ();
|
|
writel ((unsigned char)c, &uart->txdata);
|
|
}
|
|
|
|
static int altera_serial_tstc(void)
|
|
{
|
|
return (readl (&uart->status) & NIOS_UART_RRDY);
|
|
}
|
|
|
|
static int altera_serial_getc(void)
|
|
{
|
|
while (serial_tstc () == 0)
|
|
WATCHDOG_RESET ();
|
|
return (readl (&uart->rxdata) & 0x00ff );
|
|
}
|
|
|
|
static struct serial_device altera_serial_drv = {
|
|
.name = "altera_serial",
|
|
.start = altera_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = altera_serial_setbrg,
|
|
.putc = altera_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = altera_serial_getc,
|
|
.tstc = altera_serial_tstc,
|
|
};
|
|
|
|
void altera_serial_initialize(void)
|
|
{
|
|
serial_register(&altera_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &altera_serial_drv;
|
|
}
|
|
|