upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
294 lines
6.7 KiB
294 lines
6.7 KiB
/*
|
|
* (C) Copyright 2003
|
|
*
|
|
* Pantelis Antoniou <panto@intracom.gr>
|
|
* Intracom S.A.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/**************************************************************/
|
|
|
|
/* convienient macros */
|
|
#define MAX3100_SPI_RXD() (MAX3100_SPI_RXD_PORT & MAX3100_SPI_RXD_BIT)
|
|
|
|
#define MAX3100_SPI_TXD(x) \
|
|
do { \
|
|
if (x) \
|
|
MAX3100_SPI_TXD_PORT |= MAX3100_SPI_TXD_BIT; \
|
|
else \
|
|
MAX3100_SPI_TXD_PORT &= ~MAX3100_SPI_TXD_BIT; \
|
|
} while(0)
|
|
|
|
#define MAX3100_SPI_CLK(x) \
|
|
do { \
|
|
if (x) \
|
|
MAX3100_SPI_CLK_PORT |= MAX3100_SPI_CLK_BIT; \
|
|
else \
|
|
MAX3100_SPI_CLK_PORT &= ~MAX3100_SPI_CLK_BIT; \
|
|
} while(0)
|
|
|
|
#define MAX3100_SPI_CLK_TOGGLE() (MAX3100_SPI_CLK_PORT ^= MAX3100_SPI_CLK_BIT)
|
|
|
|
#define MAX3100_CS(x) \
|
|
do { \
|
|
if (x) \
|
|
MAX3100_CS_PORT |= MAX3100_CS_BIT; \
|
|
else \
|
|
MAX3100_CS_PORT &= ~MAX3100_CS_BIT; \
|
|
} while(0)
|
|
|
|
/**************************************************************/
|
|
|
|
/* MAX3100 definitions */
|
|
|
|
#define MAX3100_WC (3 << 14) /* write configuration */
|
|
#define MAX3100_RC (1 << 14) /* read configuration */
|
|
#define MAX3100_WD (2 << 14) /* write data */
|
|
#define MAX3100_RD (0 << 14) /* read data */
|
|
|
|
/* configuration register bits */
|
|
#define MAX3100_FEN (1 << 13) /* FIFO enable */
|
|
#define MAX3100_SHDN (1 << 12) /* shutdown bit */
|
|
#define MAX3100_TM (1 << 11) /* T bit irq mask */
|
|
#define MAX3100_RM (1 << 10) /* R bit irq mask */
|
|
#define MAX3100_PM (1 << 9) /* P bit irq mask */
|
|
#define MAX3100_RAM (1 << 8) /* mask for RA/FE bit */
|
|
#define MAX3100_IR (1 << 7) /* IRDA timing mode */
|
|
#define MAX3100_ST (1 << 6) /* transmit stop bit */
|
|
#define MAX3100_PE (1 << 5) /* parity enable bit */
|
|
#define MAX3100_L (1 << 4) /* Length bit */
|
|
#define MAX3100_B_MASK (0x000F) /* baud rate bits mask */
|
|
#define MAX3100_B(x) ((x) & 0x000F) /* baud rate select bits */
|
|
|
|
/* data register bits (write) */
|
|
#define MAX3100_TE (1 << 10) /* transmit enable bit (active low) */
|
|
#define MAX3100_RTS (1 << 9) /* request-to-send bit (inverted ~RTS pin) */
|
|
|
|
/* data register bits (read) */
|
|
#define MAX3100_RA (1 << 10) /* receiver activity when in shutdown mode */
|
|
#define MAX3100_FE (1 << 10) /* framing error when in normal mode */
|
|
#define MAX3100_CTS (1 << 9) /* clear-to-send bit (inverted ~CTS pin) */
|
|
|
|
/* data register bits (both directions) */
|
|
#define MAX3100_R (1 << 15) /* receive bit */
|
|
#define MAX3100_T (1 << 14) /* transmit bit */
|
|
#define MAX3100_P (1 << 8) /* parity bit */
|
|
#define MAX3100_D_MASK 0x00FF /* data bits mask */
|
|
#define MAX3100_D(x) ((x) & 0x00FF) /* data bits */
|
|
|
|
/* these definitions are valid only for fOSC = 3.6864MHz */
|
|
#define MAX3100_B_230400 MAX3100_B(0)
|
|
#define MAX3100_B_115200 MAX3100_B(1)
|
|
#define MAX3100_B_57600 MAX3100_B(2)
|
|
#define MAX3100_B_38400 MAX3100_B(9)
|
|
#define MAX3100_B_19200 MAX3100_B(10)
|
|
#define MAX3100_B_9600 MAX3100_B(11)
|
|
#define MAX3100_B_4800 MAX3100_B(12)
|
|
#define MAX3100_B_2400 MAX3100_B(13)
|
|
#define MAX3100_B_1200 MAX3100_B(14)
|
|
#define MAX3100_B_600 MAX3100_B(15)
|
|
|
|
/**************************************************************/
|
|
|
|
static inline unsigned int max3100_transfer(unsigned int val)
|
|
{
|
|
unsigned int rx;
|
|
int b;
|
|
|
|
MAX3100_SPI_CLK(0);
|
|
MAX3100_CS(0);
|
|
|
|
rx = 0; b = 16;
|
|
while (--b >= 0) {
|
|
MAX3100_SPI_TXD(val & 0x8000);
|
|
val <<= 1;
|
|
MAX3100_SPI_CLK_TOGGLE();
|
|
udelay(1);
|
|
rx <<= 1;
|
|
if (MAX3100_SPI_RXD())
|
|
rx |= 1;
|
|
MAX3100_SPI_CLK_TOGGLE();
|
|
udelay(1);
|
|
}
|
|
|
|
MAX3100_SPI_CLK(1);
|
|
MAX3100_CS(1);
|
|
|
|
return rx;
|
|
}
|
|
|
|
/**************************************************************/
|
|
|
|
/* must be power of 2 */
|
|
#define RXFIFO_SZ 16
|
|
|
|
static int rxfifo_cnt;
|
|
static int rxfifo_in;
|
|
static int rxfifo_out;
|
|
static unsigned char rxfifo_buf[16];
|
|
|
|
static void max3100_serial_putc_raw(int c)
|
|
{
|
|
unsigned int rx;
|
|
|
|
while (((rx = max3100_transfer(MAX3100_RC)) & MAX3100_T) == 0)
|
|
WATCHDOG_RESET();
|
|
|
|
rx = max3100_transfer(MAX3100_WD | (c & 0xff));
|
|
if ((rx & MAX3100_RD) != 0 && rxfifo_cnt < RXFIFO_SZ) {
|
|
rxfifo_cnt++;
|
|
rxfifo_buf[rxfifo_in++] = rx & 0xff;
|
|
rxfifo_in &= RXFIFO_SZ - 1;
|
|
}
|
|
}
|
|
|
|
static int max3100_serial_getc(void)
|
|
{
|
|
int c;
|
|
unsigned int rx;
|
|
|
|
while (rxfifo_cnt == 0) {
|
|
rx = max3100_transfer(MAX3100_RD);
|
|
if ((rx & MAX3100_R) != 0) {
|
|
do {
|
|
rxfifo_cnt++;
|
|
rxfifo_buf[rxfifo_in++] = rx & 0xff;
|
|
rxfifo_in &= RXFIFO_SZ - 1;
|
|
|
|
if (rxfifo_cnt >= RXFIFO_SZ)
|
|
break;
|
|
} while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
|
|
}
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
rxfifo_cnt--;
|
|
c = rxfifo_buf[rxfifo_out++];
|
|
rxfifo_out &= RXFIFO_SZ - 1;
|
|
return c;
|
|
}
|
|
|
|
static int max3100_serial_tstc(void)
|
|
{
|
|
unsigned int rx;
|
|
|
|
if (rxfifo_cnt > 0)
|
|
return 1;
|
|
|
|
rx = max3100_transfer(MAX3100_RD);
|
|
if ((rx & MAX3100_R) == 0)
|
|
return 0;
|
|
|
|
do {
|
|
rxfifo_cnt++;
|
|
rxfifo_buf[rxfifo_in++] = rx & 0xff;
|
|
rxfifo_in &= RXFIFO_SZ - 1;
|
|
|
|
if (rxfifo_cnt >= RXFIFO_SZ)
|
|
break;
|
|
} while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int max3100_serial_init(void)
|
|
{
|
|
unsigned int wconf, rconf;
|
|
int i;
|
|
|
|
wconf = 0;
|
|
|
|
/* Set baud rate */
|
|
switch (gd->baudrate) {
|
|
case 1200:
|
|
wconf = MAX3100_B_1200;
|
|
break;
|
|
case 2400:
|
|
wconf = MAX3100_B_2400;
|
|
break;
|
|
case 4800:
|
|
wconf = MAX3100_B_4800;
|
|
break;
|
|
case 9600:
|
|
wconf = MAX3100_B_9600;
|
|
break;
|
|
case 19200:
|
|
wconf = MAX3100_B_19200;
|
|
break;
|
|
case 38400:
|
|
wconf = MAX3100_B_38400;
|
|
break;
|
|
case 57600:
|
|
wconf = MAX3100_B_57600;
|
|
break;
|
|
default:
|
|
case 115200:
|
|
wconf = MAX3100_B_115200;
|
|
break;
|
|
case 230400:
|
|
wconf = MAX3100_B_230400;
|
|
break;
|
|
}
|
|
|
|
/* try for 10ms, with a 100us gap */
|
|
for (i = 0; i < 10000; i += 100) {
|
|
|
|
max3100_transfer(MAX3100_WC | wconf);
|
|
rconf = max3100_transfer(MAX3100_RC) & 0x3fff;
|
|
|
|
if (rconf == wconf)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
rxfifo_in = rxfifo_out = rxfifo_cnt = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void max3100_serial_putc(const char c)
|
|
{
|
|
if (c == '\n')
|
|
max3100_serial_putc_raw('\r');
|
|
|
|
max3100_serial_putc_raw(c);
|
|
}
|
|
|
|
static void max3100_serial_puts(const char *s)
|
|
{
|
|
while (*s)
|
|
max3100_serial_putc_raw(*s++);
|
|
}
|
|
|
|
static void max3100_serial_setbrg(void)
|
|
{
|
|
}
|
|
|
|
static struct serial_device max3100_serial_drv = {
|
|
.name = "max3100_serial",
|
|
.start = max3100_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = max3100_serial_setbrg,
|
|
.putc = max3100_serial_putc,
|
|
.puts = max3100_serial_puts,
|
|
.getc = max3100_serial_getc,
|
|
.tstc = max3100_serial_tstc,
|
|
};
|
|
|
|
void max3100_serial_initialize(void)
|
|
{
|
|
serial_register(&max3100_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &max3100_serial_drv;
|
|
}
|
|
|