upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
389 lines
11 KiB
389 lines
11 KiB
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/at91cap9.h>
|
|
#include <asm/arch/at91cap9_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <lcd.h>
|
|
#include <atmel_lcdc.h>
|
|
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
|
#include <net.h>
|
|
#endif
|
|
#include <netdev.h>
|
|
|
|
#define MP_BLOCK_3_BASE 0xFDF00000
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
|
|
static void at91cap9_serial_hw_init(void)
|
|
{
|
|
#ifdef CONFIG_USART0
|
|
at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART1
|
|
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART2
|
|
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART3 /* DBGU */
|
|
at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
|
|
#endif
|
|
}
|
|
|
|
static void at91cap9_slowclock_hw_init(void)
|
|
{
|
|
/*
|
|
* On AT91CAP9 revC CPUs, the slow clock can be based on an
|
|
* internal impreciseRC oscillator or an external 32kHz oscillator.
|
|
* Switch to the latter.
|
|
*/
|
|
#define ARCH_ID_AT91CAP9_REVB 0x399
|
|
#define ARCH_ID_AT91CAP9_REVC 0x601
|
|
if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
|
|
unsigned i, tmp = at91_sys_read(AT91_SCKCR);
|
|
if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
|
|
extern void timer_init(void);
|
|
timer_init();
|
|
tmp |= AT91CAP9_SCKCR_OSC32EN;
|
|
at91_sys_write(AT91_SCKCR, tmp);
|
|
for (i = 0; i < 1200; i++)
|
|
udelay(1000);
|
|
tmp |= AT91CAP9_SCKCR_OSCSEL_32;
|
|
at91_sys_write(AT91_SCKCR, tmp);
|
|
udelay(200);
|
|
tmp &= ~AT91CAP9_SCKCR_RCEN;
|
|
at91_sys_write(AT91_SCKCR, tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void at91cap9_nor_hw_init(void)
|
|
{
|
|
unsigned long csa;
|
|
|
|
/* Ensure EBI supply is 3.3V */
|
|
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
at91_sys_write(AT91_MATRIX_EBICSA,
|
|
csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
|
|
/* Configure SMC CS0 for parallel flash */
|
|
at91_sys_write(AT91_SMC_SETUP(0),
|
|
AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
|
|
AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
|
|
at91_sys_write(AT91_SMC_PULSE(0),
|
|
AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
|
|
AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
|
|
at91_sys_write(AT91_SMC_CYCLE(0),
|
|
AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
|
|
at91_sys_write(AT91_SMC_MODE(0),
|
|
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
|
AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
|
|
AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
static void at91cap9_nand_hw_init(void)
|
|
{
|
|
unsigned long csa;
|
|
|
|
/* Enable CS3 */
|
|
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
at91_sys_write(AT91_MATRIX_EBICSA,
|
|
csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
|
|
AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
at91_sys_write(AT91_SMC_SETUP(3),
|
|
AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
|
|
AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
|
|
at91_sys_write(AT91_SMC_PULSE(3),
|
|
AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
|
|
AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
|
|
at91_sys_write(AT91_SMC_CYCLE(3),
|
|
AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
|
|
at91_sys_write(AT91_SMC_MODE(3),
|
|
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
|
AT91_SMC_EXNWMODE_DISABLE |
|
|
#ifdef CFG_NAND_DBW_16
|
|
AT91_SMC_DBW_16 |
|
|
#else /* CFG_NAND_DBW_8 */
|
|
AT91_SMC_DBW_8 |
|
|
#endif
|
|
AT91_SMC_TDF_(1));
|
|
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
|
|
|
|
/* RDY/BSY is not connected */
|
|
|
|
/* Enable NandFlash */
|
|
at91_set_gpio_output(AT91_PIN_PD15, 1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
static void at91cap9_spi_hw_init(void)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
|
|
|
|
at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
|
|
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
|
|
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
|
|
|
|
/* Enable clock */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void at91cap9_macb_hw_init(void)
|
|
{
|
|
/* Enable clock */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
|
|
|
|
/*
|
|
* Disable pull-up on:
|
|
* RXDV (PB22) => PHY normal mode (not Test mode)
|
|
* ERX0 (PB25) => PHY ADDR0
|
|
* ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
|
|
*
|
|
* PHY has internal pull-down
|
|
*/
|
|
writel(pin_to_mask(AT91_PIN_PB22) |
|
|
pin_to_mask(AT91_PIN_PB25) |
|
|
pin_to_mask(AT91_PIN_PB26),
|
|
pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
|
|
|
|
/* Need to reset PHY -> 500ms reset */
|
|
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
(AT91_RSTC_ERSTL & (0x0D << 8)) |
|
|
AT91_RSTC_URSTEN);
|
|
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
|
|
|
|
/* Wait for end hardware reset */
|
|
while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
|
|
|
|
/* Restore NRST value */
|
|
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
(AT91_RSTC_ERSTL & (0x0 << 8)) |
|
|
AT91_RSTC_URSTEN);
|
|
|
|
/* Re-enable pull-up */
|
|
writel(pin_to_mask(AT91_PIN_PB22) |
|
|
pin_to_mask(AT91_PIN_PB25) |
|
|
pin_to_mask(AT91_PIN_PB26),
|
|
pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
|
|
|
|
at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
|
|
at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
|
|
at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
|
|
at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
|
|
#endif
|
|
/* Unlock EMAC, 3 0 2 1 sequence */
|
|
#define MP_MAC_KEY0 0x5969cb2a
|
|
#define MP_MAC_KEY1 0xb4a1872e
|
|
#define MP_MAC_KEY2 0x05683fbc
|
|
#define MP_MAC_KEY3 0x3634fba4
|
|
#define UNLOCK_MAC 0x00000008
|
|
writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
|
|
writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
|
|
writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
|
|
writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
|
|
writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
static void at91cap9_uhp_hw_init(void)
|
|
{
|
|
/* Unlock USB OHCI, 3 2 0 1 sequence */
|
|
#define MP_OHCI_KEY0 0x896c11ca
|
|
#define MP_OHCI_KEY1 0x68ebca21
|
|
#define MP_OHCI_KEY2 0x4823efbc
|
|
#define MP_OHCI_KEY3 0x8651aae4
|
|
#define UNLOCK_OHCI 0x00000010
|
|
writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
|
|
writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
|
|
writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
|
|
writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
|
|
writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LCD
|
|
vidinfo_t panel_info = {
|
|
vl_col: 240,
|
|
vl_row: 320,
|
|
vl_clk: 4965000,
|
|
vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
|
|
ATMEL_LCDC_INVFRAME_INVERTED,
|
|
vl_bpix: 3,
|
|
vl_tft: 1,
|
|
vl_hsync_len: 5,
|
|
vl_left_margin: 1,
|
|
vl_right_margin:33,
|
|
vl_vsync_len: 1,
|
|
vl_upper_margin:1,
|
|
vl_lower_margin:0,
|
|
mmio: AT91CAP9_LCDC_BASE,
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
|
|
}
|
|
|
|
static void at91cap9_lcd_hw_init(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
|
|
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
|
|
at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
|
|
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
|
|
at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
|
|
at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
|
|
at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
|
|
at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
|
|
at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
|
|
at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
|
|
at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
|
|
at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
|
|
at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
|
|
at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
|
|
at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
|
|
at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
|
|
at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
|
|
at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
|
|
at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
|
|
at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
|
|
at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
|
|
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
|
|
|
|
gd->fb_base = 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Enable Ctrlc */
|
|
console_init_f();
|
|
|
|
/* arch number of AT91CAP9ADK-Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
at91cap9_serial_hw_init();
|
|
at91cap9_slowclock_hw_init();
|
|
at91cap9_nor_hw_init();
|
|
#ifdef CONFIG_CMD_NAND
|
|
at91cap9_nand_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
at91cap9_spi_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
at91cap9_macb_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
at91cap9_uhp_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
at91cap9_lcd_hw_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RESET_PHY_R
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_MACB
|
|
/*
|
|
* Initialize ethernet HW addr prior to starting Linux,
|
|
* needed for nfsroot
|
|
*/
|
|
eth_init(gd->bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_MACB
|
|
rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|