upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-pxa/hardware.h

123 lines
2.8 KiB

/*
* linux/include/asm-arm/arch-pxa/hardware.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Note: This file was taken from linux-2.4.19-rmk4-pxa1
*
* - 2003/01/20 implementation specifics activated
* Robert Schwebel <r.schwebel@pengutronix.de>
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <linux/config.h>
#include <asm/mach-types.h>
/*
* Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected.
* PXA300/310/320 all have distinct register mappings in some cases, that's why
* the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common
* drivers and compatibility glue with old source then.
*/
#ifndef CONFIG_CPU_MONAHANS
#if defined(CONFIG_CPU_PXA300) || \
defined(CONFIG_CPU_PXA310) || \
defined(CONFIG_CPU_PXA320)
#define CONFIG_CPU_MONAHANS
#endif
#endif
/*
* These are statically mapped PCMCIA IO space for designs using it as a
* generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
* The actual PCMCIA code is mapping required IO region at run time.
*/
#define PCMCIA_IO_0_BASE 0xf6000000
#define PCMCIA_IO_1_BASE 0xf7000000
/*
* We requires absolute addresses.
*/
#define PCIO_BASE 0
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
*/
#define UNCACHED_PHYS_0 0xff000000
#define UNCACHED_ADDR UNCACHED_PHYS_0
/*
* Intel PXA internal I/O mappings:
*
* 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
* 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
* 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
*/
#include "pxa-regs.h"
#ifndef __ASSEMBLY__
/*
* GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* This must be called *before* the corresponding IRQ is registered.
* Use this instead of directly setting GRER/GFER.
*/
#define GPIO_FALLING_EDGE 1
#define GPIO_RISING_EDGE 2
#define GPIO_BOTH_EDGES 3
extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
/*
* Handy routine to set GPIO alternate functions
*/
extern void set_GPIO_mode( int gpio_mode );
/*
* return current lclk frequency in units of 10kHz
*/
extern unsigned int get_lclk_frequency_10khz(void);
#endif
/*
* Implementation specifics
*/
#ifdef CONFIG_ARCH_LUBBOCK
#include "lubbock.h"
#endif
#ifdef CONFIG_ARCH_PXA_IDP
#include "idp.h"
#endif
#ifdef CONFIG_ARCH_PXA_CERF
#include "cerf.h"
#endif
#ifdef CONFIG_ARCH_CSB226
#include "csb226.h"
#endif
#ifdef CONFIG_ARCH_INNOKOM
#include "innokom.h"
#endif
#ifdef CONFIG_ARCH_PLEB
#include "pleb.h"
#endif
#endif /* _ASM_ARCH_HARDWARE_H */