upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/powerpc/cpu/ppc4xx/ecc.c

204 lines
5.5 KiB

/*
* Copyright (c) 2008 Nuovation System Designs, LLC
* Grant Erickson <gerickson@nuovations.com>
*
* (C) Copyright 2005-2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
*
* (C) Copyright 2001
* Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will abe useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Description:
* This file implements generic DRAM ECC initialization for
* PowerPC processors using a SDRAM DDR/DDR2 controller,
* including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
* 460EX/GT.
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include "ecc.h"
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
#if defined(CONFIG_405EX)
/*
* Currently only 405EX uses 16bit data bus width as an alternative
* option to 32bit data width (SDRAM0_MCOPT1_WDTH)
*/
#define SDRAM_DATA_ALT_WIDTH 2
#else
#define SDRAM_DATA_ALT_WIDTH 8
#endif
static void wait_ddr_idle(void)
{
u32 val;
do {
mfsdram(SDRAM_MCSTAT, val);
} while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
}
static void program_ecc_addr(unsigned long start_address,
unsigned long num_bytes,
unsigned long tlb_word2_i_value)
{
unsigned long current_address;
unsigned long end_address;
unsigned long address_increment;
unsigned long mcopt1;
char str[] = "ECC generation -";
char slash[] = "\\|/-\\|/-";
int loop = 0;
int loopi = 0;
current_address = start_address;
mfsdram(SDRAM_MCOPT1, mcopt1);
if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
mtsdram(SDRAM_MCOPT1,
(mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
sync();
eieio();
wait_ddr_idle();
puts(str);
#ifdef CONFIG_440
if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
#endif
/* ECC bit set method for non-cached memory */
if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
address_increment = 4;
else
address_increment = SDRAM_DATA_ALT_WIDTH;
end_address = current_address + num_bytes;
while (current_address < end_address) {
*((unsigned long *)current_address) = 0;
current_address += address_increment;
if ((loop++ % (2 << 20)) == 0) {
putc('\b');
putc(slash[loopi++ % 8]);
}
}
#ifdef CONFIG_440
} else {
/* ECC bit set method for cached memory */
dcbz_area(start_address, num_bytes);
/* Write modified dcache lines back to memory */
clean_dcache_range(start_address, start_address + num_bytes);
}
#endif /* CONFIG_440 */
blank_string(strlen(str));
sync();
eieio();
wait_ddr_idle();
/* clear ECC error repoting registers */
mtsdram(SDRAM_ECCES, 0xffffffff);
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
/*
* IBM DDR(1) core (440GX):
* Clear Mx bits in SDRAM0_BESR0/1
*/
mtsdram(SDRAM0_BESR0, 0xffffffff);
mtsdram(SDRAM0_BESR1, 0xffffffff);
#elif defined(CONFIG_440)
/*
* 440/460 DDR2 core:
* Clear EMID (Error PLB Master ID) in MQ0_ESL
*/
mtdcr(SDRAM_ERRSTATLL, 0xfff00000);
#else
/*
* 405EX(r) DDR2 core:
* Clear M0ID (Error PLB Master ID) in SDRAM_BESR
*/
mtsdram(SDRAM_BESR, 0xf0000000);
#endif
mtsdram(SDRAM_MCOPT1,
(mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
sync();
eieio();
wait_ddr_idle();
}
}
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
void ecc_init(unsigned long * const start, unsigned long size)
{
/*
* Init ECC with cache disabled (on PPC's with IBM DDR
* controller (non DDR2), not tested with cache enabled yet
*/
program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
}
#endif
#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
void do_program_ecc(unsigned long tlb_word2_i_value)
{
unsigned long mcopt1;
unsigned long mcopt2;
unsigned long mcstat;
phys_size_t memsize = sdram_memsize();
if (memsize > CONFIG_MAX_MEM_MAPPED) {
printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
return;
}
mfsdram(SDRAM_MCOPT1, mcopt1);
mfsdram(SDRAM_MCOPT2, mcopt2);
if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
/* DDR controller must be enabled and not in self-refresh. */
mfsdram(SDRAM_MCSTAT, mcstat);
if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
&& ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
&& ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
== (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
program_ecc_addr(0, memsize, tlb_word2_i_value);
}
}
}
#endif
#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */