upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
3131 lines
102 KiB
3131 lines
102 KiB
/*
|
|
* (C) Copyright 2003
|
|
* Ingo Assmus <ingo.assmus@keymile.com>
|
|
*
|
|
* based on - Driver for MV64360X ethernet ports
|
|
* Copyright (C) 2002 rabeeh@galileo.co.il
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
/*
|
|
* mv_eth.c - header file for the polled mode GT ethernet driver
|
|
*/
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <malloc.h>
|
|
|
|
#include "mv_eth.h"
|
|
|
|
/* enable Debug outputs */
|
|
|
|
#undef DEBUG_MV_ETH
|
|
|
|
#ifdef DEBUG_MV_ETH
|
|
#define DEBUG
|
|
#define DP(x) x
|
|
#else
|
|
#define DP(x)
|
|
#endif
|
|
|
|
#undef MV64360_CHECKSUM_OFFLOAD
|
|
/*************************************************************************
|
|
**************************************************************************
|
|
**************************************************************************
|
|
* The first part is the high level driver of the gigE ethernet ports. *
|
|
**************************************************************************
|
|
**************************************************************************
|
|
*************************************************************************/
|
|
|
|
/* Definition for configuring driver */
|
|
/* #define UPDATE_STATS_BY_SOFTWARE */
|
|
#undef MV64360_RX_QUEUE_FILL_ON_TASK
|
|
|
|
|
|
/* Constants */
|
|
#define MAGIC_ETH_RUNNING 8031971
|
|
#define MV64360_INTERNAL_SRAM_SIZE _256K
|
|
#define EXTRA_BYTES 32
|
|
#define WRAP ETH_HLEN + 2 + 4 + 16
|
|
#define BUFFER_MTU dev->mtu + WRAP
|
|
#define INT_CAUSE_UNMASK_ALL 0x0007ffff
|
|
#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
|
|
#ifdef MV64360_RX_FILL_ON_TASK
|
|
#define INT_CAUSE_MASK_ALL 0x00000000
|
|
#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL
|
|
#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT
|
|
#endif
|
|
|
|
/* Read/Write to/from MV64360 internal registers */
|
|
#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset))
|
|
#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data)
|
|
#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits)))
|
|
#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits)))
|
|
|
|
/* Static function declarations */
|
|
static int mv64360_eth_real_open (struct eth_device *eth);
|
|
static int mv64360_eth_real_stop (struct eth_device *eth);
|
|
static struct net_device_stats *mv64360_eth_get_stats (struct eth_device
|
|
*dev);
|
|
static void eth_port_init_mac_tables (ETH_PORT eth_port_num);
|
|
static void mv64360_eth_update_stat (struct eth_device *dev);
|
|
bool db64360_eth_start (struct eth_device *eth);
|
|
unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
|
|
unsigned int mib_offset);
|
|
int mv64360_eth_receive (struct eth_device *dev);
|
|
|
|
int mv64360_eth_xmit (struct eth_device *, volatile void *packet, int length);
|
|
|
|
#ifndef UPDATE_STATS_BY_SOFTWARE
|
|
static void mv64360_eth_print_stat (struct eth_device *dev);
|
|
#endif
|
|
|
|
extern unsigned int INTERNAL_REG_BASE_ADDR;
|
|
|
|
/*************************************************
|
|
*Helper functions - used inside the driver only *
|
|
*************************************************/
|
|
#ifdef DEBUG_MV_ETH
|
|
void print_globals (struct eth_device *dev)
|
|
{
|
|
printf ("Ethernet PRINT_Globals-Debug function\n");
|
|
printf ("Base Address for ETH_PORT_INFO: %08x\n",
|
|
(unsigned int) dev->priv);
|
|
printf ("Base Address for mv64360_eth_priv: %08x\n",
|
|
(unsigned int) &(((ETH_PORT_INFO *) dev->priv)->
|
|
port_private));
|
|
|
|
printf ("GT Internal Base Address: %08x\n",
|
|
INTERNAL_REG_BASE_ADDR);
|
|
printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64360_TX_QUEUE_SIZE);
|
|
printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64360_RX_QUEUE_SIZE);
|
|
printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n",
|
|
(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
|
|
p_rx_buffer_base[0],
|
|
(MV64360_RX_QUEUE_SIZE * MV64360_RX_BUFFER_SIZE) + 32);
|
|
printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n",
|
|
(unsigned int) ((ETH_PORT_INFO *) dev->priv)->
|
|
p_tx_buffer_base[0],
|
|
(MV64360_TX_QUEUE_SIZE * MV64360_TX_BUFFER_SIZE) + 32);
|
|
}
|
|
#endif
|
|
|
|
#define my_cpu_to_le32(x) my_le32_to_cpu((x))
|
|
|
|
unsigned long my_le32_to_cpu (unsigned long x)
|
|
{
|
|
return (((x & 0x000000ffU) << 24) |
|
|
((x & 0x0000ff00U) << 8) |
|
|
((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24));
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_print_phy_status
|
|
*
|
|
* Prints gigabit ethenret phy status
|
|
*
|
|
* Input : pointer to ethernet interface network device structure
|
|
* Output : N/A
|
|
**********************************************************************/
|
|
|
|
static void mv64360_eth_print_phy_status (struct eth_device *dev)
|
|
{
|
|
struct mv64360_eth_priv *port_private;
|
|
unsigned int port_num;
|
|
ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
unsigned int port_status, phy_reg_data;
|
|
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
port_num = port_private->port_num;
|
|
|
|
/* Check Link status on phy */
|
|
eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
|
|
if (!(phy_reg_data & 0x20)) {
|
|
printf ("Ethernet port changed link status to DOWN\n");
|
|
} else {
|
|
port_status =
|
|
MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
|
|
printf ("Ethernet status port %d: Link up", port_num);
|
|
printf (", %s",
|
|
(port_status & BIT2) ? "Full Duplex" : "Half Duplex");
|
|
if (port_status & BIT4)
|
|
printf (", Speed 1 Gbps");
|
|
else
|
|
printf (", %s",
|
|
(port_status & BIT5) ? "Speed 100 Mbps" :
|
|
"Speed 10 Mbps");
|
|
printf ("\n");
|
|
}
|
|
}
|
|
|
|
/**********************************************************************
|
|
* u-boot entry functions for mv64360_eth
|
|
*
|
|
**********************************************************************/
|
|
int db64360_eth_probe (struct eth_device *dev)
|
|
{
|
|
return ((int) db64360_eth_start (dev));
|
|
}
|
|
|
|
int db64360_eth_poll (struct eth_device *dev)
|
|
{
|
|
return mv64360_eth_receive (dev);
|
|
}
|
|
|
|
int db64360_eth_transmit(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
mv64360_eth_xmit (dev, packet, length);
|
|
return 0;
|
|
}
|
|
|
|
void db64360_eth_disable (struct eth_device *dev)
|
|
{
|
|
mv64360_eth_stop (dev);
|
|
}
|
|
|
|
|
|
void mv6436x_eth_initialize (bd_t * bis)
|
|
{
|
|
struct eth_device *dev;
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
int devnum, x, temp;
|
|
char *s, *e, buf[64];
|
|
|
|
for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) {
|
|
dev = calloc (sizeof (*dev), 1);
|
|
if (!dev) {
|
|
printf ("%s: mv_enet%d allocation failure, %s\n",
|
|
__FUNCTION__, devnum, "eth_device structure");
|
|
return;
|
|
}
|
|
|
|
/* must be less than sizeof(dev->name) */
|
|
sprintf (dev->name, "mv_enet%d", devnum);
|
|
|
|
#ifdef DEBUG
|
|
printf ("Initializing %s\n", dev->name);
|
|
#endif
|
|
|
|
/* Extract the MAC address from the environment */
|
|
switch (devnum) {
|
|
case 0:
|
|
s = "ethaddr";
|
|
break;
|
|
|
|
case 1:
|
|
s = "eth1addr";
|
|
break;
|
|
|
|
case 2:
|
|
s = "eth2addr";
|
|
break;
|
|
|
|
default: /* this should never happen */
|
|
printf ("%s: Invalid device number %d\n",
|
|
__FUNCTION__, devnum);
|
|
return;
|
|
}
|
|
|
|
temp = getenv_f(s, buf, sizeof (buf));
|
|
s = (temp > 0) ? buf : NULL;
|
|
|
|
#ifdef DEBUG
|
|
printf ("Setting MAC %d to %s\n", devnum, s);
|
|
#endif
|
|
for (x = 0; x < 6; ++x) {
|
|
dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e + 1 : e;
|
|
}
|
|
/* ronen - set the MAC addr in the HW */
|
|
eth_port_uc_addr_set (devnum, dev->enetaddr, 0);
|
|
|
|
dev->init = (void *) db64360_eth_probe;
|
|
dev->halt = (void *) ethernet_phy_reset;
|
|
dev->send = (void *) db64360_eth_transmit;
|
|
dev->recv = (void *) db64360_eth_poll;
|
|
|
|
ethernet_private =
|
|
calloc (sizeof (*ethernet_private), 1);
|
|
dev->priv = (void *) ethernet_private;
|
|
if (!ethernet_private) {
|
|
printf ("%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name,
|
|
"Private Device Structure");
|
|
free (dev);
|
|
return;
|
|
}
|
|
/* start with an zeroed ETH_PORT_INFO */
|
|
memset (ethernet_private, 0, sizeof (ETH_PORT_INFO));
|
|
memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
|
|
|
|
/* set pointer to memory for stats data structure etc... */
|
|
port_private =
|
|
calloc (sizeof (*ethernet_private), 1);
|
|
ethernet_private->port_private = (void *)port_private;
|
|
if (!port_private) {
|
|
printf ("%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name,
|
|
"Port Private Device Structure");
|
|
|
|
free (ethernet_private);
|
|
free (dev);
|
|
return;
|
|
}
|
|
|
|
port_private->stats =
|
|
calloc (sizeof (struct net_device_stats), 1);
|
|
if (!port_private->stats) {
|
|
printf ("%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name,
|
|
"Net stat Structure");
|
|
|
|
free (port_private);
|
|
free (ethernet_private);
|
|
free (dev);
|
|
return;
|
|
}
|
|
memset (ethernet_private->port_private, 0,
|
|
sizeof (struct mv64360_eth_priv));
|
|
switch (devnum) {
|
|
case 0:
|
|
ethernet_private->port_num = ETH_0;
|
|
break;
|
|
case 1:
|
|
ethernet_private->port_num = ETH_1;
|
|
break;
|
|
case 2:
|
|
ethernet_private->port_num = ETH_2;
|
|
break;
|
|
default:
|
|
printf ("Invalid device number %d\n", devnum);
|
|
break;
|
|
};
|
|
|
|
port_private->port_num = devnum;
|
|
/*
|
|
* Read MIB counter on the GT in order to reset them,
|
|
* then zero all the stats fields in memory
|
|
*/
|
|
mv64360_eth_update_stat (dev);
|
|
memset (port_private->stats, 0,
|
|
sizeof (struct net_device_stats));
|
|
/* Extract the MAC address from the environment */
|
|
switch (devnum) {
|
|
case 0:
|
|
s = "ethaddr";
|
|
break;
|
|
|
|
case 1:
|
|
s = "eth1addr";
|
|
break;
|
|
|
|
case 2:
|
|
s = "eth2addr";
|
|
break;
|
|
|
|
default: /* this should never happen */
|
|
printf ("%s: Invalid device number %d\n",
|
|
__FUNCTION__, devnum);
|
|
return;
|
|
}
|
|
|
|
temp = getenv_f(s, buf, sizeof (buf));
|
|
s = (temp > 0) ? buf : NULL;
|
|
|
|
#ifdef DEBUG
|
|
printf ("Setting MAC %d to %s\n", devnum, s);
|
|
#endif
|
|
for (x = 0; x < 6; ++x) {
|
|
dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e + 1 : e;
|
|
}
|
|
|
|
DP (printf ("Allocating descriptor and buffer rings\n"));
|
|
|
|
ethernet_private->p_rx_desc_area_base[0] =
|
|
(ETH_RX_DESC *) memalign (16,
|
|
RX_DESC_ALIGNED_SIZE *
|
|
MV64360_RX_QUEUE_SIZE + 1);
|
|
ethernet_private->p_tx_desc_area_base[0] =
|
|
(ETH_TX_DESC *) memalign (16,
|
|
TX_DESC_ALIGNED_SIZE *
|
|
MV64360_TX_QUEUE_SIZE + 1);
|
|
|
|
ethernet_private->p_rx_buffer_base[0] =
|
|
(char *) memalign (16,
|
|
MV64360_RX_QUEUE_SIZE *
|
|
MV64360_TX_BUFFER_SIZE + 1);
|
|
ethernet_private->p_tx_buffer_base[0] =
|
|
(char *) memalign (16,
|
|
MV64360_RX_QUEUE_SIZE *
|
|
MV64360_TX_BUFFER_SIZE + 1);
|
|
|
|
#ifdef DEBUG_MV_ETH
|
|
/* DEBUG OUTPUT prints adresses of globals */
|
|
print_globals (dev);
|
|
#endif
|
|
eth_register (dev);
|
|
|
|
}
|
|
DP (printf ("%s: exit\n", __FUNCTION__));
|
|
|
|
}
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_open
|
|
*
|
|
* This function is called when openning the network device. The function
|
|
* should initialize all the hardware, initialize cyclic Rx/Tx
|
|
* descriptors chain and buffers and allocate an IRQ to the network
|
|
* device.
|
|
*
|
|
* Input : a pointer to the network device structure
|
|
* / / ronen - changed the output to match net/eth.c needs
|
|
* Output : nonzero of success , zero if fails.
|
|
* under construction
|
|
**********************************************************************/
|
|
|
|
int mv64360_eth_open (struct eth_device *dev)
|
|
{
|
|
return (mv64360_eth_real_open (dev));
|
|
}
|
|
|
|
/* Helper function for mv64360_eth_open */
|
|
static int mv64360_eth_real_open (struct eth_device *dev)
|
|
{
|
|
|
|
unsigned int queue;
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
unsigned int port_num;
|
|
u32 phy_reg_data;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
/* ronen - when we update the MAC env params we only update dev->enetaddr
|
|
see ./net/eth.c eth_set_enetaddr() */
|
|
memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6);
|
|
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
port_num = port_private->port_num;
|
|
|
|
/* Stop RX Queues */
|
|
MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
|
|
0x0000ff00);
|
|
|
|
/* Clear the ethernet port interrupts */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
|
|
|
|
/* Unmask RX buffer and TX end interrupt */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num),
|
|
INT_CAUSE_UNMASK_ALL);
|
|
|
|
/* Unmask phy and link status changes interrupts */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num),
|
|
INT_CAUSE_UNMASK_ALL_EXT);
|
|
|
|
/* Set phy address of the port */
|
|
ethernet_private->port_phy_addr = 0x8 + port_num;
|
|
|
|
/* Activate the DMA channels etc */
|
|
eth_port_init (ethernet_private);
|
|
|
|
|
|
/* "Allocate" setup TX rings */
|
|
|
|
for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
|
|
unsigned int size;
|
|
|
|
port_private->tx_ring_size[queue] = MV64360_TX_QUEUE_SIZE;
|
|
size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */
|
|
ethernet_private->tx_desc_area_size[queue] = size;
|
|
|
|
/* first clear desc area completely */
|
|
memset ((void *) ethernet_private->p_tx_desc_area_base[queue],
|
|
0, ethernet_private->tx_desc_area_size[queue]);
|
|
|
|
/* initialize tx desc ring with low level driver */
|
|
if (ether_init_tx_desc_ring
|
|
(ethernet_private, ETH_Q0,
|
|
port_private->tx_ring_size[queue],
|
|
MV64360_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
|
|
(unsigned int) ethernet_private->
|
|
p_tx_desc_area_base[queue],
|
|
(unsigned int) ethernet_private->
|
|
p_tx_buffer_base[queue]) == false)
|
|
printf ("### Error initializing TX Ring\n");
|
|
}
|
|
|
|
/* "Allocate" setup RX rings */
|
|
for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
|
|
unsigned int size;
|
|
|
|
/* Meantime RX Ring are fixed - but must be configurable by user */
|
|
port_private->rx_ring_size[queue] = MV64360_RX_QUEUE_SIZE;
|
|
size = (port_private->rx_ring_size[queue] *
|
|
RX_DESC_ALIGNED_SIZE);
|
|
ethernet_private->rx_desc_area_size[queue] = size;
|
|
|
|
/* first clear desc area completely */
|
|
memset ((void *) ethernet_private->p_rx_desc_area_base[queue],
|
|
0, ethernet_private->rx_desc_area_size[queue]);
|
|
if ((ether_init_rx_desc_ring
|
|
(ethernet_private, ETH_Q0,
|
|
port_private->rx_ring_size[queue],
|
|
MV64360_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ ,
|
|
(unsigned int) ethernet_private->
|
|
p_rx_desc_area_base[queue],
|
|
(unsigned int) ethernet_private->
|
|
p_rx_buffer_base[queue])) == false)
|
|
printf ("### Error initializing RX Ring\n");
|
|
}
|
|
|
|
eth_port_start (ethernet_private);
|
|
|
|
/* Set maximum receive buffer to 9700 bytes */
|
|
MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num),
|
|
(0x5 << 17) |
|
|
(MV_REG_READ
|
|
(MV64360_ETH_PORT_SERIAL_CONTROL_REG (port_num))
|
|
& 0xfff1ffff));
|
|
|
|
/*
|
|
* Set ethernet MTU for leaky bucket mechanism to 0 - this will
|
|
* disable the leaky bucket mechanism .
|
|
*/
|
|
|
|
MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0);
|
|
MV_REG_READ (MV64360_ETH_PORT_STATUS_REG (port_num));
|
|
|
|
/* Check Link status on phy */
|
|
eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
|
|
if (!(phy_reg_data & 0x20)) {
|
|
/* Reset PHY */
|
|
if ((ethernet_phy_reset (port_num)) != true) {
|
|
printf ("$$ Warnning: No link on port %d \n",
|
|
port_num);
|
|
return 0;
|
|
} else {
|
|
eth_port_read_smi_reg (port_num, 1, &phy_reg_data);
|
|
if (!(phy_reg_data & 0x20)) {
|
|
printf ("### Error: Phy is not active\n");
|
|
return 0;
|
|
}
|
|
}
|
|
} else {
|
|
mv64360_eth_print_phy_status (dev);
|
|
}
|
|
port_private->eth_running = MAGIC_ETH_RUNNING;
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int mv64360_eth_free_tx_rings (struct eth_device *dev)
|
|
{
|
|
unsigned int queue;
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
unsigned int port_num;
|
|
volatile ETH_TX_DESC *p_tx_curr_desc;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
port_num = port_private->port_num;
|
|
|
|
/* Stop Tx Queues */
|
|
MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num),
|
|
0x0000ff00);
|
|
|
|
/* Free TX rings */
|
|
DP (printf ("Clearing previously allocated TX queues... "));
|
|
for (queue = 0; queue < MV64360_TX_QUEUE_NUM; queue++) {
|
|
/* Free on TX rings */
|
|
for (p_tx_curr_desc =
|
|
ethernet_private->p_tx_desc_area_base[queue];
|
|
((unsigned int) p_tx_curr_desc <= (unsigned int)
|
|
ethernet_private->p_tx_desc_area_base[queue] +
|
|
ethernet_private->tx_desc_area_size[queue]);
|
|
p_tx_curr_desc =
|
|
(ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc +
|
|
TX_DESC_ALIGNED_SIZE)) {
|
|
/* this is inside for loop */
|
|
if (p_tx_curr_desc->return_info != 0) {
|
|
p_tx_curr_desc->return_info = 0;
|
|
DP (printf ("freed\n"));
|
|
}
|
|
}
|
|
DP (printf ("Done\n"));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mv64360_eth_free_rx_rings (struct eth_device *dev)
|
|
{
|
|
unsigned int queue;
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
unsigned int port_num;
|
|
volatile ETH_RX_DESC *p_rx_curr_desc;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
port_num = port_private->port_num;
|
|
|
|
|
|
/* Stop RX Queues */
|
|
MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num),
|
|
0x0000ff00);
|
|
|
|
/* Free RX rings */
|
|
DP (printf ("Clearing previously allocated RX queues... "));
|
|
for (queue = 0; queue < MV64360_RX_QUEUE_NUM; queue++) {
|
|
/* Free preallocated skb's on RX rings */
|
|
for (p_rx_curr_desc =
|
|
ethernet_private->p_rx_desc_area_base[queue];
|
|
(((unsigned int) p_rx_curr_desc <
|
|
((unsigned int) ethernet_private->
|
|
p_rx_desc_area_base[queue] +
|
|
ethernet_private->rx_desc_area_size[queue])));
|
|
p_rx_curr_desc =
|
|
(ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc +
|
|
RX_DESC_ALIGNED_SIZE)) {
|
|
if (p_rx_curr_desc->return_info != 0) {
|
|
p_rx_curr_desc->return_info = 0;
|
|
DP (printf ("freed\n"));
|
|
}
|
|
}
|
|
DP (printf ("Done\n"));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_stop
|
|
*
|
|
* This function is used when closing the network device.
|
|
* It updates the hardware,
|
|
* release all memory that holds buffers and descriptors and release the IRQ.
|
|
* Input : a pointer to the device structure
|
|
* Output : zero if success , nonzero if fails
|
|
*********************************************************************/
|
|
|
|
int mv64360_eth_stop (struct eth_device *dev)
|
|
{
|
|
/* Disable all gigE address decoder */
|
|
MV_REG_WRITE (MV64360_ETH_BASE_ADDR_ENABLE_REG, 0x3f);
|
|
DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__));
|
|
mv64360_eth_real_stop (dev);
|
|
|
|
return 0;
|
|
};
|
|
|
|
/* Helper function for mv64360_eth_stop */
|
|
|
|
static int mv64360_eth_real_stop (struct eth_device *dev)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
unsigned int port_num;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
port_num = port_private->port_num;
|
|
|
|
|
|
mv64360_eth_free_tx_rings (dev);
|
|
mv64360_eth_free_rx_rings (dev);
|
|
|
|
eth_port_reset (ethernet_private->port_num);
|
|
/* Disable ethernet port interrupts */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_REG (port_num), 0);
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0);
|
|
/* Mask RX buffer and TX end interrupt */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_MASK_REG (port_num), 0);
|
|
/* Mask phy and link status changes interrupts */
|
|
MV_REG_WRITE (MV64360_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0);
|
|
MV_RESET_REG_BITS (MV64360_CPU_INTERRUPT0_MASK_HIGH,
|
|
BIT0 << port_num);
|
|
/* Print Network statistics */
|
|
#ifndef UPDATE_STATS_BY_SOFTWARE
|
|
/*
|
|
* Print statistics (only if ethernet is running),
|
|
* then zero all the stats fields in memory
|
|
*/
|
|
if (port_private->eth_running == MAGIC_ETH_RUNNING) {
|
|
port_private->eth_running = 0;
|
|
mv64360_eth_print_stat (dev);
|
|
}
|
|
memset (port_private->stats, 0, sizeof (struct net_device_stats));
|
|
#endif
|
|
DP (printf ("\nEthernet stopped ... \n"));
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_start_xmit
|
|
*
|
|
* This function is queues a packet in the Tx descriptor for
|
|
* required port.
|
|
*
|
|
* Input : skb - a pointer to socket buffer
|
|
* dev - a pointer to the required port
|
|
*
|
|
* Output : zero upon success
|
|
**********************************************************************/
|
|
|
|
int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
|
|
int dataSize)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
PKT_INFO pkt_info;
|
|
ETH_FUNC_RET_STATUS status;
|
|
struct net_device_stats *stats;
|
|
ETH_FUNC_RET_STATUS release_result;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
|
|
stats = port_private->stats;
|
|
|
|
/* Update packet info data structure */
|
|
pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
|
|
pkt_info.byte_cnt = dataSize;
|
|
pkt_info.buf_ptr = (unsigned int) dataPtr;
|
|
pkt_info.return_info = 0;
|
|
|
|
status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
|
|
if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
|
|
printf ("Error on transmitting packet ..");
|
|
if (status == ETH_QUEUE_FULL)
|
|
printf ("ETH Queue is full. \n");
|
|
if (status == ETH_QUEUE_LAST_RESOURCE)
|
|
printf ("ETH Queue: using last available resource. \n");
|
|
goto error;
|
|
}
|
|
|
|
/* Update statistics and start of transmittion time */
|
|
stats->tx_bytes += dataSize;
|
|
stats->tx_packets++;
|
|
|
|
/* Check if packet(s) is(are) transmitted correctly (release everything) */
|
|
do {
|
|
release_result =
|
|
eth_tx_return_desc (ethernet_private, ETH_Q0,
|
|
&pkt_info);
|
|
switch (release_result) {
|
|
case ETH_OK:
|
|
DP (printf ("descriptor released\n"));
|
|
if (pkt_info.cmd_sts & BIT0) {
|
|
printf ("Error in TX\n");
|
|
stats->tx_errors++;
|
|
|
|
}
|
|
break;
|
|
case ETH_RETRY:
|
|
DP (printf ("transmission still in process\n"));
|
|
break;
|
|
|
|
case ETH_ERROR:
|
|
printf ("routine can not access Tx desc ring\n");
|
|
break;
|
|
|
|
case ETH_END_OF_JOB:
|
|
DP (printf ("the routine has nothing to release\n"));
|
|
break;
|
|
default: /* should not happen */
|
|
break;
|
|
}
|
|
} while (release_result == ETH_OK);
|
|
|
|
|
|
return 0; /* success */
|
|
error:
|
|
return 1; /* Failed - higher layers will free the skb */
|
|
}
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_receive
|
|
*
|
|
* This function is forward packets that are received from the port's
|
|
* queues toward kernel core or FastRoute them to another interface.
|
|
*
|
|
* Input : dev - a pointer to the required interface
|
|
* max - maximum number to receive (0 means unlimted)
|
|
*
|
|
* Output : number of served packets
|
|
**********************************************************************/
|
|
|
|
int mv64360_eth_receive (struct eth_device *dev)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
PKT_INFO pkt_info;
|
|
struct net_device_stats *stats;
|
|
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
stats = port_private->stats;
|
|
|
|
while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) ==
|
|
ETH_OK)) {
|
|
|
|
#ifdef DEBUG_MV_ETH
|
|
if (pkt_info.byte_cnt != 0) {
|
|
printf ("%s: Received %d byte Packet @ 0x%x\n",
|
|
__FUNCTION__, pkt_info.byte_cnt,
|
|
pkt_info.buf_ptr);
|
|
}
|
|
#endif
|
|
/* Update statistics. Note byte count includes 4 byte CRC count */
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += pkt_info.byte_cnt;
|
|
|
|
/*
|
|
* In case received a packet without first / last bits on OR the error
|
|
* summary bit is on, the packets needs to be dropeed.
|
|
*/
|
|
if (((pkt_info.
|
|
cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
|
|
(ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
|
|
|| (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
|
|
stats->rx_dropped++;
|
|
|
|
printf ("Received packet spread on multiple descriptors\n");
|
|
|
|
/* Is this caused by an error ? */
|
|
if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) {
|
|
stats->rx_errors++;
|
|
}
|
|
|
|
/* free these descriptors again without forwarding them to the higher layers */
|
|
pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
|
|
pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
|
|
|
|
if (eth_rx_return_buff
|
|
(ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
|
|
printf ("Error while returning the RX Desc to Ring\n");
|
|
} else {
|
|
DP (printf ("RX Desc returned to Ring\n"));
|
|
}
|
|
/* /free these descriptors again */
|
|
} else {
|
|
|
|
/* !!! call higher layer processing */
|
|
#ifdef DEBUG_MV_ETH
|
|
printf ("\nNow send it to upper layer protocols (NetReceive) ...\n");
|
|
#endif
|
|
/* let the upper layer handle the packet */
|
|
NetReceive ((uchar *) pkt_info.buf_ptr,
|
|
(int) pkt_info.byte_cnt);
|
|
|
|
/* **************************************************************** */
|
|
/* free descriptor */
|
|
pkt_info.buf_ptr &= ~0x7; /* realign buffer again */
|
|
pkt_info.byte_cnt = 0x0000; /* Reset Byte count */
|
|
DP (printf
|
|
("RX: pkt_info.buf_ptr = %x\n",
|
|
pkt_info.buf_ptr));
|
|
if (eth_rx_return_buff
|
|
(ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) {
|
|
printf ("Error while returning the RX Desc to Ring\n");
|
|
} else {
|
|
DP (printf ("RX Desc returned to Ring\n"));
|
|
}
|
|
|
|
/* **************************************************************** */
|
|
|
|
}
|
|
}
|
|
mv64360_eth_get_stats (dev); /* update statistics */
|
|
return 1;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_get_stats
|
|
*
|
|
* Returns a pointer to the interface statistics.
|
|
*
|
|
* Input : dev - a pointer to the required interface
|
|
*
|
|
* Output : a pointer to the interface's statistics
|
|
**********************************************************************/
|
|
|
|
static struct net_device_stats *mv64360_eth_get_stats (struct eth_device *dev)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
|
|
mv64360_eth_update_stat (dev);
|
|
|
|
return port_private->stats;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* mv64360_eth_update_stat
|
|
*
|
|
* Update the statistics structure in the private data structure
|
|
*
|
|
* Input : pointer to ethernet interface network device structure
|
|
* Output : N/A
|
|
**********************************************************************/
|
|
|
|
static void mv64360_eth_update_stat (struct eth_device *dev)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
struct net_device_stats *stats;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
stats = port_private->stats;
|
|
|
|
/* These are false updates */
|
|
stats->rx_packets += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_FRAMES_RECEIVED);
|
|
stats->tx_packets += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_FRAMES_SENT);
|
|
stats->rx_bytes += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
|
|
/*
|
|
* Ideally this should be as follows -
|
|
*
|
|
* stats->rx_bytes += stats->rx_bytes +
|
|
* ((unsigned long) ethReadMibCounter (ethernet_private->port_num ,
|
|
* ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32);
|
|
*
|
|
* But the unsigned long in PowerPC and MIPS are 32bit. So the next read
|
|
* is just a dummy read for proper work of the GigE port
|
|
*/
|
|
(void)eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH);
|
|
stats->tx_bytes += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_OCTETS_SENT_LOW);
|
|
(void)eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_GOOD_OCTETS_SENT_HIGH);
|
|
stats->rx_errors += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_MAC_RECEIVE_ERROR);
|
|
|
|
/* Rx dropped is for received packet with CRC error */
|
|
stats->rx_dropped +=
|
|
(unsigned long) eth_read_mib_counter (ethernet_private->
|
|
port_num,
|
|
ETH_MIB_BAD_CRC_EVENT);
|
|
stats->multicast += (unsigned long)
|
|
eth_read_mib_counter (ethernet_private->port_num,
|
|
ETH_MIB_MULTICAST_FRAMES_RECEIVED);
|
|
stats->collisions +=
|
|
(unsigned long) eth_read_mib_counter (ethernet_private->
|
|
port_num,
|
|
ETH_MIB_COLLISION) +
|
|
(unsigned long) eth_read_mib_counter (ethernet_private->
|
|
port_num,
|
|
ETH_MIB_LATE_COLLISION);
|
|
/* detailed rx errors */
|
|
stats->rx_length_errors +=
|
|
(unsigned long) eth_read_mib_counter (ethernet_private->
|
|
port_num,
|
|
ETH_MIB_UNDERSIZE_RECEIVED)
|
|
+
|
|
(unsigned long) eth_read_mib_counter (ethernet_private->
|
|
port_num,
|
|
ETH_MIB_OVERSIZE_RECEIVED);
|
|
/* detailed tx errors */
|
|
}
|
|
|
|
#ifndef UPDATE_STATS_BY_SOFTWARE
|
|
/**********************************************************************
|
|
* mv64360_eth_print_stat
|
|
*
|
|
* Update the statistics structure in the private data structure
|
|
*
|
|
* Input : pointer to ethernet interface network device structure
|
|
* Output : N/A
|
|
**********************************************************************/
|
|
|
|
static void mv64360_eth_print_stat (struct eth_device *dev)
|
|
{
|
|
ETH_PORT_INFO *ethernet_private;
|
|
struct mv64360_eth_priv *port_private;
|
|
struct net_device_stats *stats;
|
|
|
|
ethernet_private = (ETH_PORT_INFO *) dev->priv;
|
|
port_private =
|
|
(struct mv64360_eth_priv *) ethernet_private->port_private;
|
|
stats = port_private->stats;
|
|
|
|
/* These are false updates */
|
|
printf ("\n### Network statistics: ###\n");
|
|
printf ("--------------------------\n");
|
|
printf (" Packets received: %ld\n", stats->rx_packets);
|
|
printf (" Packets send: %ld\n", stats->tx_packets);
|
|
printf (" Received bytes: %ld\n", stats->rx_bytes);
|
|
printf (" Send bytes: %ld\n", stats->tx_bytes);
|
|
if (stats->rx_errors != 0)
|
|
printf (" Rx Errors: %ld\n",
|
|
stats->rx_errors);
|
|
if (stats->rx_dropped != 0)
|
|
printf (" Rx dropped (CRC Errors): %ld\n",
|
|
stats->rx_dropped);
|
|
if (stats->multicast != 0)
|
|
printf (" Rx mulicast frames: %ld\n",
|
|
stats->multicast);
|
|
if (stats->collisions != 0)
|
|
printf (" No. of collisions: %ld\n",
|
|
stats->collisions);
|
|
if (stats->rx_length_errors != 0)
|
|
printf (" Rx length errors: %ld\n",
|
|
stats->rx_length_errors);
|
|
}
|
|
#endif
|
|
|
|
/**************************************************************************
|
|
*network_start - Network Kick Off Routine UBoot
|
|
*Inputs :
|
|
*Outputs :
|
|
**************************************************************************/
|
|
|
|
bool db64360_eth_start (struct eth_device *dev)
|
|
{
|
|
return (mv64360_eth_open (dev)); /* calls real open */
|
|
}
|
|
|
|
/*************************************************************************
|
|
**************************************************************************
|
|
**************************************************************************
|
|
* The second part is the low level driver of the gigE ethernet ports. *
|
|
**************************************************************************
|
|
**************************************************************************
|
|
*************************************************************************/
|
|
/*
|
|
* based on Linux code
|
|
* arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports
|
|
* Copyright (C) 2002 rabeeh@galileo.co.il
|
|
*/
|
|
|
|
/********************************************************************************
|
|
* Marvell's Gigabit Ethernet controller low level driver
|
|
*
|
|
* DESCRIPTION:
|
|
* This file introduce low level API to Marvell's Gigabit Ethernet
|
|
* controller. This Gigabit Ethernet Controller driver API controls
|
|
* 1) Operations (i.e. port init, start, reset etc').
|
|
* 2) Data flow (i.e. port send, receive etc').
|
|
* Each Gigabit Ethernet port is controlled via ETH_PORT_INFO
|
|
* struct.
|
|
* This struct includes user configuration information as well as
|
|
* driver internal data needed for its operations.
|
|
*
|
|
* Supported Features:
|
|
* - This low level driver is OS independent. Allocating memory for
|
|
* the descriptor rings and buffers are not within the scope of
|
|
* this driver.
|
|
* - The user is free from Rx/Tx queue managing.
|
|
* - This low level driver introduce functionality API that enable
|
|
* the to operate Marvell's Gigabit Ethernet Controller in a
|
|
* convenient way.
|
|
* - Simple Gigabit Ethernet port operation API.
|
|
* - Simple Gigabit Ethernet port data flow API.
|
|
* - Data flow and operation API support per queue functionality.
|
|
* - Support cached descriptors for better performance.
|
|
* - Enable access to all four DRAM banks and internal SRAM memory
|
|
* spaces.
|
|
* - PHY access and control API.
|
|
* - Port control register configuration API.
|
|
* - Full control over Unicast and Multicast MAC configurations.
|
|
*
|
|
* Operation flow:
|
|
*
|
|
* Initialization phase
|
|
* This phase complete the initialization of the ETH_PORT_INFO
|
|
* struct.
|
|
* User information regarding port configuration has to be set
|
|
* prior to calling the port initialization routine. For example,
|
|
* the user has to assign the port_phy_addr field which is board
|
|
* depended parameter.
|
|
* In this phase any port Tx/Rx activity is halted, MIB counters
|
|
* are cleared, PHY address is set according to user parameter and
|
|
* access to DRAM and internal SRAM memory spaces.
|
|
*
|
|
* Driver ring initialization
|
|
* Allocating memory for the descriptor rings and buffers is not
|
|
* within the scope of this driver. Thus, the user is required to
|
|
* allocate memory for the descriptors ring and buffers. Those
|
|
* memory parameters are used by the Rx and Tx ring initialization
|
|
* routines in order to curve the descriptor linked list in a form
|
|
* of a ring.
|
|
* Note: Pay special attention to alignment issues when using
|
|
* cached descriptors/buffers. In this phase the driver store
|
|
* information in the ETH_PORT_INFO struct regarding each queue
|
|
* ring.
|
|
*
|
|
* Driver start
|
|
* This phase prepares the Ethernet port for Rx and Tx activity.
|
|
* It uses the information stored in the ETH_PORT_INFO struct to
|
|
* initialize the various port registers.
|
|
*
|
|
* Data flow:
|
|
* All packet references to/from the driver are done using PKT_INFO
|
|
* struct.
|
|
* This struct is a unified struct used with Rx and Tx operations.
|
|
* This way the user is not required to be familiar with neither
|
|
* Tx nor Rx descriptors structures.
|
|
* The driver's descriptors rings are management by indexes.
|
|
* Those indexes controls the ring resources and used to indicate
|
|
* a SW resource error:
|
|
* 'current'
|
|
* This index points to the current available resource for use. For
|
|
* example in Rx process this index will point to the descriptor
|
|
* that will be passed to the user upon calling the receive routine.
|
|
* In Tx process, this index will point to the descriptor
|
|
* that will be assigned with the user packet info and transmitted.
|
|
* 'used'
|
|
* This index points to the descriptor that need to restore its
|
|
* resources. For example in Rx process, using the Rx buffer return
|
|
* API will attach the buffer returned in packet info to the
|
|
* descriptor pointed by 'used'. In Tx process, using the Tx
|
|
* descriptor return will merely return the user packet info with
|
|
* the command status of the transmitted buffer pointed by the
|
|
* 'used' index. Nevertheless, it is essential to use this routine
|
|
* to update the 'used' index.
|
|
* 'first'
|
|
* This index supports Tx Scatter-Gather. It points to the first
|
|
* descriptor of a packet assembled of multiple buffers. For example
|
|
* when in middle of Such packet we have a Tx resource error the
|
|
* 'curr' index get the value of 'first' to indicate that the ring
|
|
* returned to its state before trying to transmit this packet.
|
|
*
|
|
* Receive operation:
|
|
* The eth_port_receive API set the packet information struct,
|
|
* passed by the caller, with received information from the
|
|
* 'current' SDMA descriptor.
|
|
* It is the user responsibility to return this resource back
|
|
* to the Rx descriptor ring to enable the reuse of this source.
|
|
* Return Rx resource is done using the eth_rx_return_buff API.
|
|
*
|
|
* Transmit operation:
|
|
* The eth_port_send API supports Scatter-Gather which enables to
|
|
* send a packet spanned over multiple buffers. This means that
|
|
* for each packet info structure given by the user and put into
|
|
* the Tx descriptors ring, will be transmitted only if the 'LAST'
|
|
* bit will be set in the packet info command status field. This
|
|
* API also consider restriction regarding buffer alignments and
|
|
* sizes.
|
|
* The user must return a Tx resource after ensuring the buffer
|
|
* has been transmitted to enable the Tx ring indexes to update.
|
|
*
|
|
* BOARD LAYOUT
|
|
* This device is on-board. No jumper diagram is necessary.
|
|
*
|
|
* EXTERNAL INTERFACE
|
|
*
|
|
* Prior to calling the initialization routine eth_port_init() the user
|
|
* must set the following fields under ETH_PORT_INFO struct:
|
|
* port_num User Ethernet port number.
|
|
* port_phy_addr User PHY address of Ethernet port.
|
|
* port_mac_addr[6] User defined port MAC address.
|
|
* port_config User port configuration value.
|
|
* port_config_extend User port config extend value.
|
|
* port_sdma_config User port SDMA config value.
|
|
* port_serial_control User port serial control value.
|
|
* *port_virt_to_phys () User function to cast virtual addr to CPU bus addr.
|
|
* *port_private User scratch pad for user specific data structures.
|
|
*
|
|
* This driver introduce a set of default values:
|
|
* PORT_CONFIG_VALUE Default port configuration value
|
|
* PORT_CONFIG_EXTEND_VALUE Default port extend configuration value
|
|
* PORT_SDMA_CONFIG_VALUE Default sdma control value
|
|
* PORT_SERIAL_CONTROL_VALUE Default port serial control value
|
|
*
|
|
* This driver data flow is done using the PKT_INFO struct which is
|
|
* a unified struct for Rx and Tx operations:
|
|
* byte_cnt Tx/Rx descriptor buffer byte count.
|
|
* l4i_chk CPU provided TCP Checksum. For Tx operation only.
|
|
* cmd_sts Tx/Rx descriptor command status.
|
|
* buf_ptr Tx/Rx descriptor buffer pointer.
|
|
* return_info Tx/Rx user resource return information.
|
|
*
|
|
*
|
|
* EXTERNAL SUPPORT REQUIREMENTS
|
|
*
|
|
* This driver requires the following external support:
|
|
*
|
|
* D_CACHE_FLUSH_LINE (address, address offset)
|
|
*
|
|
* This macro applies assembly code to flush and invalidate cache
|
|
* line.
|
|
* address - address base.
|
|
* address offset - address offset
|
|
*
|
|
*
|
|
* CPU_PIPE_FLUSH
|
|
*
|
|
* This macro applies assembly code to flush the CPU pipeline.
|
|
*
|
|
*******************************************************************************/
|
|
/* includes */
|
|
|
|
/* defines */
|
|
/* SDMA command macros */
|
|
#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \
|
|
MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue))
|
|
|
|
#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \
|
|
MV_REG_WRITE(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\
|
|
(1 << (8 + tx_queue)))
|
|
|
|
#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \
|
|
MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue))
|
|
|
|
#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \
|
|
MV_REG_WRITE(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue)))
|
|
|
|
#define CURR_RFD_GET(p_curr_desc, queue) \
|
|
((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue])
|
|
|
|
#define CURR_RFD_SET(p_curr_desc, queue) \
|
|
(p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc))
|
|
|
|
#define USED_RFD_GET(p_used_desc, queue) \
|
|
((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue])
|
|
|
|
#define USED_RFD_SET(p_used_desc, queue)\
|
|
(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc))
|
|
|
|
|
|
#define CURR_TFD_GET(p_curr_desc, queue) \
|
|
((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue])
|
|
|
|
#define CURR_TFD_SET(p_curr_desc, queue) \
|
|
(p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc))
|
|
|
|
#define USED_TFD_GET(p_used_desc, queue) \
|
|
((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue])
|
|
|
|
#define USED_TFD_SET(p_used_desc, queue) \
|
|
(p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc))
|
|
|
|
#define FIRST_TFD_GET(p_first_desc, queue) \
|
|
((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue])
|
|
|
|
#define FIRST_TFD_SET(p_first_desc, queue) \
|
|
(p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc))
|
|
|
|
|
|
/* Macros that save access to desc in order to find next desc pointer */
|
|
#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue])
|
|
|
|
#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue])
|
|
|
|
#define LINK_UP_TIMEOUT 100000
|
|
#define PHY_BUSY_TIMEOUT 10000000
|
|
|
|
/* locals */
|
|
|
|
/* PHY routines */
|
|
static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr);
|
|
static int ethernet_phy_get (ETH_PORT eth_port_num);
|
|
|
|
/* Ethernet Port routines */
|
|
static void eth_set_access_control (ETH_PORT eth_port_num,
|
|
ETH_WIN_PARAM * param);
|
|
static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble,
|
|
ETH_QUEUE queue, int option);
|
|
#if 0 /* FIXME */
|
|
static bool eth_port_smc_addr (ETH_PORT eth_port_num,
|
|
unsigned char mc_byte,
|
|
ETH_QUEUE queue, int option);
|
|
static bool eth_port_omc_addr (ETH_PORT eth_port_num,
|
|
unsigned char crc8,
|
|
ETH_QUEUE queue, int option);
|
|
#endif
|
|
|
|
static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
|
|
int byte_count);
|
|
|
|
void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl);
|
|
|
|
|
|
typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK;
|
|
u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank)
|
|
{
|
|
u32 result = 0;
|
|
u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
|
|
|
|
if (enable & (1 << bank))
|
|
return 0;
|
|
if (bank == BANK0)
|
|
result = MV_REG_READ (MV64360_CS_0_BASE_ADDR);
|
|
if (bank == BANK1)
|
|
result = MV_REG_READ (MV64360_CS_1_BASE_ADDR);
|
|
if (bank == BANK2)
|
|
result = MV_REG_READ (MV64360_CS_2_BASE_ADDR);
|
|
if (bank == BANK3)
|
|
result = MV_REG_READ (MV64360_CS_3_BASE_ADDR);
|
|
result &= 0x0000ffff;
|
|
result = result << 16;
|
|
return result;
|
|
}
|
|
|
|
u32 mv_get_dram_bank_size (MEMORY_BANK bank)
|
|
{
|
|
u32 result = 0;
|
|
u32 enable = MV_REG_READ (MV64360_BASE_ADDR_ENABLE);
|
|
|
|
if (enable & (1 << bank))
|
|
return 0;
|
|
if (bank == BANK0)
|
|
result = MV_REG_READ (MV64360_CS_0_SIZE);
|
|
if (bank == BANK1)
|
|
result = MV_REG_READ (MV64360_CS_1_SIZE);
|
|
if (bank == BANK2)
|
|
result = MV_REG_READ (MV64360_CS_2_SIZE);
|
|
if (bank == BANK3)
|
|
result = MV_REG_READ (MV64360_CS_3_SIZE);
|
|
result += 1;
|
|
result &= 0x0000ffff;
|
|
result = result << 16;
|
|
return result;
|
|
}
|
|
|
|
u32 mv_get_internal_sram_base (void)
|
|
{
|
|
u32 result;
|
|
|
|
result = MV_REG_READ (MV64360_INTEGRATED_SRAM_BASE_ADDR);
|
|
result &= 0x0000ffff;
|
|
result = result << 16;
|
|
return result;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_init - Initialize the Ethernet port driver
|
|
*
|
|
* DESCRIPTION:
|
|
* This function prepares the ethernet port to start its activity:
|
|
* 1) Completes the ethernet port driver struct initialization toward port
|
|
* start routine.
|
|
* 2) Resets the device to a quiescent state in case of warm reboot.
|
|
* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
|
|
* 4) Clean MAC tables. The reset status of those tables is unknown.
|
|
* 5) Set PHY address.
|
|
* Note: Call this routine prior to eth_port_start routine and after setting
|
|
* user values in the user fields of Ethernet port control struct (i.e.
|
|
* port_phy_addr).
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
|
|
*
|
|
* OUTPUT:
|
|
* See description.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
|
|
{
|
|
int queue;
|
|
ETH_WIN_PARAM win_param;
|
|
|
|
p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE;
|
|
p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE;
|
|
p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE;
|
|
p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE;
|
|
|
|
p_eth_port_ctrl->port_rx_queue_command = 0;
|
|
p_eth_port_ctrl->port_tx_queue_command = 0;
|
|
|
|
/* Zero out SW structs */
|
|
for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
|
|
CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
|
|
USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue);
|
|
p_eth_port_ctrl->rx_resource_err[queue] = false;
|
|
}
|
|
|
|
for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
|
|
CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
|
|
USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
|
|
FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue);
|
|
p_eth_port_ctrl->tx_resource_err[queue] = false;
|
|
}
|
|
|
|
eth_port_reset (p_eth_port_ctrl->port_num);
|
|
|
|
/* Set access parameters for DRAM bank 0 */
|
|
win_param.win = ETH_WIN0; /* Use Ethernet window 0 */
|
|
win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
|
|
win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */
|
|
#ifndef CONFIG_NOT_COHERENT_CACHE
|
|
win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
|
|
#endif
|
|
win_param.high_addr = 0;
|
|
/* Get bank base */
|
|
win_param.base_addr = mv_get_dram_bank_base_addr (BANK0);
|
|
win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */
|
|
if (win_param.size == 0)
|
|
win_param.enable = 0;
|
|
else
|
|
win_param.enable = 1; /* Enable the access */
|
|
win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
|
|
|
|
/* Set the access control for address window (EPAPR) READ & WRITE */
|
|
eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
|
|
|
|
/* Set access parameters for DRAM bank 1 */
|
|
win_param.win = ETH_WIN1; /* Use Ethernet window 1 */
|
|
win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
|
|
win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */
|
|
#ifndef CONFIG_NOT_COHERENT_CACHE
|
|
win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
|
|
#endif
|
|
win_param.high_addr = 0;
|
|
/* Get bank base */
|
|
win_param.base_addr = mv_get_dram_bank_base_addr (BANK1);
|
|
win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */
|
|
if (win_param.size == 0)
|
|
win_param.enable = 0;
|
|
else
|
|
win_param.enable = 1; /* Enable the access */
|
|
win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
|
|
|
|
/* Set the access control for address window (EPAPR) READ & WRITE */
|
|
eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
|
|
|
|
/* Set access parameters for DRAM bank 2 */
|
|
win_param.win = ETH_WIN2; /* Use Ethernet window 2 */
|
|
win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
|
|
win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */
|
|
#ifndef CONFIG_NOT_COHERENT_CACHE
|
|
win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
|
|
#endif
|
|
win_param.high_addr = 0;
|
|
/* Get bank base */
|
|
win_param.base_addr = mv_get_dram_bank_base_addr (BANK2);
|
|
win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */
|
|
if (win_param.size == 0)
|
|
win_param.enable = 0;
|
|
else
|
|
win_param.enable = 1; /* Enable the access */
|
|
win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
|
|
|
|
/* Set the access control for address window (EPAPR) READ & WRITE */
|
|
eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
|
|
|
|
/* Set access parameters for DRAM bank 3 */
|
|
win_param.win = ETH_WIN3; /* Use Ethernet window 3 */
|
|
win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */
|
|
win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */
|
|
#ifndef CONFIG_NOT_COHERENT_CACHE
|
|
win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB;
|
|
#endif
|
|
win_param.high_addr = 0;
|
|
/* Get bank base */
|
|
win_param.base_addr = mv_get_dram_bank_base_addr (BANK3);
|
|
win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */
|
|
if (win_param.size == 0)
|
|
win_param.enable = 0;
|
|
else
|
|
win_param.enable = 1; /* Enable the access */
|
|
win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
|
|
|
|
/* Set the access control for address window (EPAPR) READ & WRITE */
|
|
eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
|
|
|
|
/* Set access parameters for Internal SRAM */
|
|
win_param.win = ETH_WIN4; /* Use Ethernet window 0 */
|
|
win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */
|
|
win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0;
|
|
win_param.high_addr = 0;
|
|
win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */
|
|
win_param.size = MV64360_INTERNAL_SRAM_SIZE; /* Get bank size */
|
|
win_param.enable = 1; /* Enable the access */
|
|
win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */
|
|
|
|
/* Set the access control for address window (EPAPR) READ & WRITE */
|
|
eth_set_access_control (p_eth_port_ctrl->port_num, &win_param);
|
|
|
|
eth_port_init_mac_tables (p_eth_port_ctrl->port_num);
|
|
|
|
ethernet_phy_set (p_eth_port_ctrl->port_num,
|
|
p_eth_port_ctrl->port_phy_addr);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_start - Start the Ethernet port activity.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine prepares the Ethernet port for Rx and Tx activity:
|
|
* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
|
|
* has been initialized a descriptor's ring (using ether_init_tx_desc_ring
|
|
* for Tx and ether_init_rx_desc_ring for Rx)
|
|
* 2. Initialize and enable the Ethernet configuration port by writing to
|
|
* the port's configuration and command registers.
|
|
* 3. Initialize and enable the SDMA by writing to the SDMA's
|
|
* configuration and command registers.
|
|
* After completing these steps, the ethernet port SDMA can starts to
|
|
* perform Rx and Tx activities.
|
|
*
|
|
* Note: Each Rx and Tx queue descriptor's list must be initialized prior
|
|
* to calling this function (use ether_init_tx_desc_ring for Tx queues and
|
|
* ether_init_rx_desc_ring for Rx queues).
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
|
|
*
|
|
* OUTPUT:
|
|
* Ethernet port is ready to receive and transmit.
|
|
*
|
|
* RETURN:
|
|
* false if the port PHY is not up.
|
|
* true otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
|
|
{
|
|
int queue;
|
|
volatile ETH_TX_DESC *p_tx_curr_desc;
|
|
volatile ETH_RX_DESC *p_rx_curr_desc;
|
|
unsigned int phy_reg_data;
|
|
ETH_PORT eth_port_num = p_eth_port_ctrl->port_num;
|
|
|
|
|
|
/* Assignment of Tx CTRP of given queue */
|
|
for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) {
|
|
CURR_TFD_GET (p_tx_curr_desc, queue);
|
|
MV_REG_WRITE ((MV64360_ETH_TX_CURRENT_QUEUE_DESC_PTR_0
|
|
(eth_port_num)
|
|
+ (4 * queue)),
|
|
((unsigned int) p_tx_curr_desc));
|
|
|
|
}
|
|
|
|
/* Assignment of Rx CRDP of given queue */
|
|
for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) {
|
|
CURR_RFD_GET (p_rx_curr_desc, queue);
|
|
MV_REG_WRITE ((MV64360_ETH_RX_CURRENT_QUEUE_DESC_PTR_0
|
|
(eth_port_num)
|
|
+ (4 * queue)),
|
|
((unsigned int) p_rx_curr_desc));
|
|
|
|
if (p_rx_curr_desc != NULL)
|
|
/* Add the assigned Ethernet address to the port's address table */
|
|
eth_port_uc_addr_set (p_eth_port_ctrl->port_num,
|
|
p_eth_port_ctrl->port_mac_addr,
|
|
queue);
|
|
}
|
|
|
|
/* Assign port configuration and command. */
|
|
MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
|
|
p_eth_port_ctrl->port_config);
|
|
|
|
MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
|
|
p_eth_port_ctrl->port_config_extend);
|
|
|
|
MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
|
|
p_eth_port_ctrl->port_serial_control);
|
|
|
|
MV_SET_REG_BITS (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
|
|
ETH_SERIAL_PORT_ENABLE);
|
|
|
|
/* Assign port SDMA configuration */
|
|
MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
|
|
p_eth_port_ctrl->port_sdma_config);
|
|
|
|
MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT
|
|
(eth_port_num), 0x3fffffff);
|
|
MV_REG_WRITE (MV64360_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG
|
|
(eth_port_num), 0x03fffcff);
|
|
/* Turn off the port/queue bandwidth limitation */
|
|
MV_REG_WRITE (MV64360_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0);
|
|
|
|
/* Enable port Rx. */
|
|
MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num),
|
|
p_eth_port_ctrl->port_rx_queue_command);
|
|
|
|
/* Check if link is up */
|
|
eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
|
|
|
|
if (!(phy_reg_data & 0x20))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_uc_addr_set - This function Set the port Unicast address.
|
|
*
|
|
* DESCRIPTION:
|
|
* This function Set the port Ethernet MAC address.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Port number.
|
|
* char * p_addr Address to be set
|
|
* ETH_QUEUE queue Rx queue number for this MAC address.
|
|
*
|
|
* OUTPUT:
|
|
* Set MAC address low and high registers. also calls eth_port_uc_addr()
|
|
* To set the unicast table with the proper information.
|
|
*
|
|
* RETURN:
|
|
* N/A.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
|
|
unsigned char *p_addr, ETH_QUEUE queue)
|
|
{
|
|
unsigned int mac_h;
|
|
unsigned int mac_l;
|
|
|
|
mac_l = (p_addr[4] << 8) | (p_addr[5]);
|
|
mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) |
|
|
(p_addr[2] << 8) | (p_addr[3] << 0);
|
|
|
|
MV_REG_WRITE (MV64360_ETH_MAC_ADDR_LOW (eth_port_num), mac_l);
|
|
MV_REG_WRITE (MV64360_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h);
|
|
|
|
/* Accept frames of this address */
|
|
eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR);
|
|
|
|
return;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_uc_addr - This function Set the port unicast address table
|
|
*
|
|
* DESCRIPTION:
|
|
* This function locates the proper entry in the Unicast table for the
|
|
* specified MAC nibble and sets its properties according to function
|
|
* parameters.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Port number.
|
|
* unsigned char uc_nibble Unicast MAC Address last nibble.
|
|
* ETH_QUEUE queue Rx queue number for this MAC address.
|
|
* int option 0 = Add, 1 = remove address.
|
|
*
|
|
* OUTPUT:
|
|
* This function add/removes MAC addresses from the port unicast address
|
|
* table.
|
|
*
|
|
* RETURN:
|
|
* true is output succeeded.
|
|
* false if option parameter is invalid.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_uc_addr (ETH_PORT eth_port_num,
|
|
unsigned char uc_nibble,
|
|
ETH_QUEUE queue, int option)
|
|
{
|
|
unsigned int unicast_reg;
|
|
unsigned int tbl_offset;
|
|
unsigned int reg_offset;
|
|
|
|
/* Locate the Unicast table entry */
|
|
uc_nibble = (0xf & uc_nibble);
|
|
tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */
|
|
reg_offset = uc_nibble % 4; /* Entry offset within the above register */
|
|
|
|
switch (option) {
|
|
case REJECT_MAC_ADDR:
|
|
/* Clear accepts frame bit at specified unicast DA table entry */
|
|
unicast_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
|
|
(eth_port_num)
|
|
+ tbl_offset));
|
|
|
|
unicast_reg &= (0x0E << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
|
|
(eth_port_num)
|
|
+ tbl_offset), unicast_reg);
|
|
break;
|
|
|
|
case ACCEPT_MAC_ADDR:
|
|
/* Set accepts frame bit at unicast DA filter table entry */
|
|
unicast_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
|
|
(eth_port_num)
|
|
+ tbl_offset));
|
|
|
|
unicast_reg |= ((0x01 | queue) << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
|
|
(eth_port_num)
|
|
+ tbl_offset), unicast_reg);
|
|
|
|
break;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#if 0 /* FIXME */
|
|
/*******************************************************************************
|
|
* eth_port_mc_addr - Multicast address settings.
|
|
*
|
|
* DESCRIPTION:
|
|
* This API controls the MV device MAC multicast support.
|
|
* The MV device supports multicast using two tables:
|
|
* 1) Special Multicast Table for MAC addresses of the form
|
|
* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
|
|
* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
|
|
* Table entries in the DA-Filter table.
|
|
* In this case, the function calls eth_port_smc_addr() routine to set the
|
|
* Special Multicast Table.
|
|
* 2) Other Multicast Table for multicast of another type. A CRC-8bit
|
|
* is used as an index to the Other Multicast Table entries in the
|
|
* DA-Filter table.
|
|
* In this case, the function calculates the CRC-8bit value and calls
|
|
* eth_port_omc_addr() routine to set the Other Multicast Table.
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Port number.
|
|
* unsigned char *p_addr Unicast MAC Address.
|
|
* ETH_QUEUE queue Rx queue number for this MAC address.
|
|
* int option 0 = Add, 1 = remove address.
|
|
*
|
|
* OUTPUT:
|
|
* See description.
|
|
*
|
|
* RETURN:
|
|
* true is output succeeded.
|
|
* false if add_address_table_entry( ) failed.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_port_mc_addr (ETH_PORT eth_port_num,
|
|
unsigned char *p_addr,
|
|
ETH_QUEUE queue, int option)
|
|
{
|
|
unsigned int mac_h;
|
|
unsigned int mac_l;
|
|
unsigned char crc_result = 0;
|
|
int mac_array[48];
|
|
int crc[8];
|
|
int i;
|
|
|
|
|
|
if ((p_addr[0] == 0x01) &&
|
|
(p_addr[1] == 0x00) &&
|
|
(p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00))
|
|
|
|
eth_port_smc_addr (eth_port_num, p_addr[5], queue, option);
|
|
else {
|
|
/* Calculate CRC-8 out of the given address */
|
|
mac_h = (p_addr[0] << 8) | (p_addr[1]);
|
|
mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
|
|
(p_addr[4] << 8) | (p_addr[5] << 0);
|
|
|
|
for (i = 0; i < 32; i++)
|
|
mac_array[i] = (mac_l >> i) & 0x1;
|
|
for (i = 32; i < 48; i++)
|
|
mac_array[i] = (mac_h >> (i - 32)) & 0x1;
|
|
|
|
|
|
crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^
|
|
mac_array[39] ^ mac_array[35] ^ mac_array[34] ^
|
|
mac_array[31] ^ mac_array[30] ^ mac_array[28] ^
|
|
mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
|
|
mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
|
|
mac_array[12] ^ mac_array[8] ^ mac_array[7] ^
|
|
mac_array[6] ^ mac_array[0];
|
|
|
|
crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
|
|
mac_array[43] ^ mac_array[41] ^ mac_array[39] ^
|
|
mac_array[36] ^ mac_array[34] ^ mac_array[32] ^
|
|
mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
|
|
mac_array[24] ^ mac_array[23] ^ mac_array[22] ^
|
|
mac_array[21] ^ mac_array[20] ^ mac_array[18] ^
|
|
mac_array[17] ^ mac_array[16] ^ mac_array[15] ^
|
|
mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
|
|
mac_array[9] ^ mac_array[6] ^ mac_array[1] ^
|
|
mac_array[0];
|
|
|
|
crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^
|
|
mac_array[43] ^ mac_array[42] ^ mac_array[39] ^
|
|
mac_array[37] ^ mac_array[34] ^ mac_array[33] ^
|
|
mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
|
|
mac_array[24] ^ mac_array[22] ^ mac_array[17] ^
|
|
mac_array[15] ^ mac_array[13] ^ mac_array[12] ^
|
|
mac_array[10] ^ mac_array[8] ^ mac_array[6] ^
|
|
mac_array[2] ^ mac_array[1] ^ mac_array[0];
|
|
|
|
crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^
|
|
mac_array[43] ^ mac_array[40] ^ mac_array[38] ^
|
|
mac_array[35] ^ mac_array[34] ^ mac_array[30] ^
|
|
mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
|
|
mac_array[23] ^ mac_array[18] ^ mac_array[16] ^
|
|
mac_array[14] ^ mac_array[13] ^ mac_array[11] ^
|
|
mac_array[9] ^ mac_array[7] ^ mac_array[3] ^
|
|
mac_array[2] ^ mac_array[1];
|
|
|
|
crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^
|
|
mac_array[41] ^ mac_array[39] ^ mac_array[36] ^
|
|
mac_array[35] ^ mac_array[31] ^ mac_array[30] ^
|
|
mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
|
|
mac_array[19] ^ mac_array[17] ^ mac_array[15] ^
|
|
mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
|
|
mac_array[8] ^ mac_array[4] ^ mac_array[3] ^
|
|
mac_array[2];
|
|
|
|
crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^
|
|
mac_array[42] ^ mac_array[40] ^ mac_array[37] ^
|
|
mac_array[36] ^ mac_array[32] ^ mac_array[31] ^
|
|
mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
|
|
mac_array[20] ^ mac_array[18] ^ mac_array[16] ^
|
|
mac_array[15] ^ mac_array[13] ^ mac_array[11] ^
|
|
mac_array[9] ^ mac_array[5] ^ mac_array[4] ^
|
|
mac_array[3];
|
|
|
|
crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^
|
|
mac_array[41] ^ mac_array[38] ^ mac_array[37] ^
|
|
mac_array[33] ^ mac_array[32] ^ mac_array[29] ^
|
|
mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
|
|
mac_array[19] ^ mac_array[17] ^ mac_array[16] ^
|
|
mac_array[14] ^ mac_array[12] ^ mac_array[10] ^
|
|
mac_array[6] ^ mac_array[5] ^ mac_array[4];
|
|
|
|
crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^
|
|
mac_array[39] ^ mac_array[38] ^ mac_array[34] ^
|
|
mac_array[33] ^ mac_array[30] ^ mac_array[29] ^
|
|
mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
|
|
mac_array[18] ^ mac_array[17] ^ mac_array[15] ^
|
|
mac_array[13] ^ mac_array[11] ^ mac_array[7] ^
|
|
mac_array[6] ^ mac_array[5];
|
|
|
|
for (i = 0; i < 8; i++)
|
|
crc_result = crc_result | (crc[i] << i);
|
|
|
|
eth_port_omc_addr (eth_port_num, crc_result, queue, option);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_smc_addr - Special Multicast address settings.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine controls the MV device special MAC multicast support.
|
|
* The Special Multicast Table for MAC addresses supports MAC of the form
|
|
* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF).
|
|
* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
|
|
* Table entries in the DA-Filter table.
|
|
* This function set the Special Multicast Table appropriate entry
|
|
* according to the argument given.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Port number.
|
|
* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
|
|
* ETH_QUEUE queue Rx queue number for this MAC address.
|
|
* int option 0 = Add, 1 = remove address.
|
|
*
|
|
* OUTPUT:
|
|
* See description.
|
|
*
|
|
* RETURN:
|
|
* true is output succeeded.
|
|
* false if option parameter is invalid.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_smc_addr (ETH_PORT eth_port_num,
|
|
unsigned char mc_byte,
|
|
ETH_QUEUE queue, int option)
|
|
{
|
|
unsigned int smc_table_reg;
|
|
unsigned int tbl_offset;
|
|
unsigned int reg_offset;
|
|
|
|
/* Locate the SMC table entry */
|
|
tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */
|
|
reg_offset = mc_byte % 4; /* Entry offset within the above register */
|
|
queue &= 0x7;
|
|
|
|
switch (option) {
|
|
case REJECT_MAC_ADDR:
|
|
/* Clear accepts frame bit at specified Special DA table entry */
|
|
smc_table_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
|
|
smc_table_reg &= (0x0E << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
|
|
break;
|
|
|
|
case ACCEPT_MAC_ADDR:
|
|
/* Set accepts frame bit at specified Special DA table entry */
|
|
smc_table_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
|
|
smc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg);
|
|
break;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_omc_addr - Multicast address settings.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine controls the MV device Other MAC multicast support.
|
|
* The Other Multicast Table is used for multicast of another type.
|
|
* A CRC-8bit is used as an index to the Other Multicast Table entries
|
|
* in the DA-Filter table.
|
|
* The function gets the CRC-8bit value from the calling routine and
|
|
* set the Other Multicast Table appropriate entry according to the
|
|
* CRC-8 argument given.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Port number.
|
|
* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
|
|
* ETH_QUEUE queue Rx queue number for this MAC address.
|
|
* int option 0 = Add, 1 = remove address.
|
|
*
|
|
* OUTPUT:
|
|
* See description.
|
|
*
|
|
* RETURN:
|
|
* true is output succeeded.
|
|
* false if option parameter is invalid.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_omc_addr (ETH_PORT eth_port_num,
|
|
unsigned char crc8,
|
|
ETH_QUEUE queue, int option)
|
|
{
|
|
unsigned int omc_table_reg;
|
|
unsigned int tbl_offset;
|
|
unsigned int reg_offset;
|
|
|
|
/* Locate the OMC table entry */
|
|
tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */
|
|
reg_offset = crc8 % 4; /* Entry offset within the above register */
|
|
queue &= 0x7;
|
|
|
|
switch (option) {
|
|
case REJECT_MAC_ADDR:
|
|
/* Clear accepts frame bit at specified Other DA table entry */
|
|
omc_table_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
|
|
omc_table_reg &= (0x0E << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
|
|
break;
|
|
|
|
case ACCEPT_MAC_ADDR:
|
|
/* Set accepts frame bit at specified Other DA table entry */
|
|
omc_table_reg =
|
|
MV_REG_READ ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset));
|
|
omc_table_reg |= ((0x01 | queue) << (8 * reg_offset));
|
|
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg);
|
|
break;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
|
|
*
|
|
* DESCRIPTION:
|
|
* Go through all the DA filter tables (Unicast, Special Multicast & Other
|
|
* Multicast) and set each entry to 0.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* Multicast and Unicast packets are rejected.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_port_init_mac_tables (ETH_PORT eth_port_num)
|
|
{
|
|
int table_index;
|
|
|
|
/* Clear DA filter unicast table (Ex_dFUT) */
|
|
for (table_index = 0; table_index <= 0xC; table_index += 4)
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_UNICAST_TABLE_BASE
|
|
(eth_port_num) + table_index), 0);
|
|
|
|
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
|
|
/* Clear DA filter special multicast table (Ex_dFSMT) */
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
|
|
/* Clear DA filter other multicast table (Ex_dFOMT) */
|
|
MV_REG_WRITE ((MV64360_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0);
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_clear_mib_counters - Clear all MIB counters
|
|
*
|
|
* DESCRIPTION:
|
|
* This function clears all MIB counters of a specific ethernet port.
|
|
* A read from the MIB counter will reset the counter.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* After reading all MIB counters, the counters resets.
|
|
*
|
|
* RETURN:
|
|
* MIB counter value.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_clear_mib_counters (ETH_PORT eth_port_num)
|
|
{
|
|
int i;
|
|
|
|
/* Perform dummy reads from MIB counters */
|
|
for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
|
|
i += 4) {
|
|
(void)MV_REG_READ ((MV64360_ETH_MIB_COUNTERS_BASE
|
|
(eth_port_num) + i));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_read_mib_counter - Read a MIB counter
|
|
*
|
|
* DESCRIPTION:
|
|
* This function reads a MIB counter of a specific ethernet port.
|
|
* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the
|
|
* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH
|
|
* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and
|
|
* ETH_MIB_GOOD_OCTETS_SENT_HIGH
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros).
|
|
*
|
|
* OUTPUT:
|
|
* After reading the MIB counter, the counter resets.
|
|
*
|
|
* RETURN:
|
|
* MIB counter value.
|
|
*
|
|
*******************************************************************************/
|
|
unsigned int eth_read_mib_counter (ETH_PORT eth_port_num,
|
|
unsigned int mib_offset)
|
|
{
|
|
return (MV_REG_READ (MV64360_ETH_MIB_COUNTERS_BASE (eth_port_num)
|
|
+ mib_offset));
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* ethernet_phy_set - Set the ethernet port PHY address.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine set the ethernet port PHY address according to given
|
|
* parameter.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* Set PHY Address Register with given PHY address parameter.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr)
|
|
{
|
|
unsigned int reg_data;
|
|
|
|
reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
|
|
|
|
reg_data &= ~(0x1F << (5 * eth_port_num));
|
|
reg_data |= (phy_addr << (5 * eth_port_num));
|
|
|
|
MV_REG_WRITE (MV64360_ETH_PHY_ADDR_REG, reg_data);
|
|
|
|
return;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* ethernet_phy_get - Get the ethernet port PHY address.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine returns the given ethernet port PHY address.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* PHY address.
|
|
*
|
|
*******************************************************************************/
|
|
static int ethernet_phy_get (ETH_PORT eth_port_num)
|
|
{
|
|
unsigned int reg_data;
|
|
|
|
reg_data = MV_REG_READ (MV64360_ETH_PHY_ADDR_REG);
|
|
|
|
return ((reg_data >> (5 * eth_port_num)) & 0x1f);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* ethernet_phy_reset - Reset Ethernet port PHY.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine utilize the SMI interface to reset the ethernet port PHY.
|
|
* The routine waits until the link is up again or link up is timeout.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* The ethernet port PHY renew its link.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static bool ethernet_phy_reset (ETH_PORT eth_port_num)
|
|
{
|
|
unsigned int time_out = 50;
|
|
unsigned int phy_reg_data;
|
|
|
|
/* Reset the PHY */
|
|
eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data);
|
|
phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
|
|
eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data);
|
|
|
|
/* Poll on the PHY LINK */
|
|
do {
|
|
eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data);
|
|
|
|
if (time_out-- == 0)
|
|
return false;
|
|
}
|
|
while (!(phy_reg_data & 0x20));
|
|
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_reset - Reset Ethernet port
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine resets the chip by aborting any SDMA engine activity and
|
|
* clearing the MIB counters. The Receiver and the Transmit unit are in
|
|
* idle state after this command is performed and the port is disabled.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* Channel activity is halted.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_port_reset (ETH_PORT eth_port_num)
|
|
{
|
|
unsigned int reg_data;
|
|
|
|
/* Stop Tx port activity. Check port Tx activity. */
|
|
reg_data =
|
|
MV_REG_READ (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
|
|
(eth_port_num));
|
|
|
|
if (reg_data & 0xFF) {
|
|
/* Issue stop command for active channels only */
|
|
MV_REG_WRITE (MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
|
|
(eth_port_num), (reg_data << 8));
|
|
|
|
/* Wait for all Tx activity to terminate. */
|
|
do {
|
|
/* Check port cause register that all Tx queues are stopped */
|
|
reg_data =
|
|
MV_REG_READ
|
|
(MV64360_ETH_TRANSMIT_QUEUE_COMMAND_REG
|
|
(eth_port_num));
|
|
}
|
|
while (reg_data & 0xFF);
|
|
}
|
|
|
|
/* Stop Rx port activity. Check port Rx activity. */
|
|
reg_data =
|
|
MV_REG_READ (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
|
|
(eth_port_num));
|
|
|
|
if (reg_data & 0xFF) {
|
|
/* Issue stop command for active channels only */
|
|
MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
|
|
(eth_port_num), (reg_data << 8));
|
|
|
|
/* Wait for all Rx activity to terminate. */
|
|
do {
|
|
/* Check port cause register that all Rx queues are stopped */
|
|
reg_data =
|
|
MV_REG_READ
|
|
(MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG
|
|
(eth_port_num));
|
|
}
|
|
while (reg_data & 0xFF);
|
|
}
|
|
|
|
|
|
/* Clear all MIB counters */
|
|
eth_clear_mib_counters (eth_port_num);
|
|
|
|
/* Reset the Enable bit in the Configuration Register */
|
|
reg_data =
|
|
MV_REG_READ (MV64360_ETH_PORT_SERIAL_CONTROL_REG
|
|
(eth_port_num));
|
|
reg_data &= ~ETH_SERIAL_PORT_ENABLE;
|
|
MV_REG_WRITE (MV64360_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num),
|
|
reg_data);
|
|
|
|
return;
|
|
}
|
|
|
|
#if 0 /* Not needed here */
|
|
/*******************************************************************************
|
|
* ethernet_set_config_reg - Set specified bits in configuration register.
|
|
*
|
|
* DESCRIPTION:
|
|
* This function sets specified bits in the given ethernet
|
|
* configuration register.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* unsigned int value 32 bit value.
|
|
*
|
|
* OUTPUT:
|
|
* The set bits in the value parameter are set in the configuration
|
|
* register.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void ethernet_set_config_reg (ETH_PORT eth_port_num,
|
|
unsigned int value)
|
|
{
|
|
unsigned int eth_config_reg;
|
|
|
|
eth_config_reg =
|
|
MV_REG_READ (MV64360_ETH_PORT_CONFIG_REG (eth_port_num));
|
|
eth_config_reg |= value;
|
|
MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_REG (eth_port_num),
|
|
eth_config_reg);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#if 0 /* FIXME */
|
|
/*******************************************************************************
|
|
* ethernet_reset_config_reg - Reset specified bits in configuration register.
|
|
*
|
|
* DESCRIPTION:
|
|
* This function resets specified bits in the given Ethernet
|
|
* configuration register.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* unsigned int value 32 bit value.
|
|
*
|
|
* OUTPUT:
|
|
* The set bits in the value parameter are reset in the configuration
|
|
* register.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void ethernet_reset_config_reg (ETH_PORT eth_port_num,
|
|
unsigned int value)
|
|
{
|
|
unsigned int eth_config_reg;
|
|
|
|
eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
|
|
(eth_port_num));
|
|
eth_config_reg &= ~value;
|
|
MV_REG_WRITE (MV64360_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num),
|
|
eth_config_reg);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#if 0 /* Not needed here */
|
|
/*******************************************************************************
|
|
* ethernet_get_config_reg - Get the port configuration register
|
|
*
|
|
* DESCRIPTION:
|
|
* This function returns the configuration register value of the given
|
|
* ethernet port.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* Port configuration register value.
|
|
*
|
|
*******************************************************************************/
|
|
static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num)
|
|
{
|
|
unsigned int eth_config_reg;
|
|
|
|
eth_config_reg = MV_REG_READ (MV64360_ETH_PORT_CONFIG_EXTEND_REG
|
|
(eth_port_num));
|
|
return eth_config_reg;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* eth_port_read_smi_reg - Read PHY registers
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine utilize the SMI interface to interact with the PHY in
|
|
* order to perform PHY register read.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* unsigned int phy_reg PHY register address offset.
|
|
* unsigned int *value Register value buffer.
|
|
*
|
|
* OUTPUT:
|
|
* Write the value of a specified PHY register into given buffer.
|
|
*
|
|
* RETURN:
|
|
* false if the PHY is busy or read data is not in valid state.
|
|
* true otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_read_smi_reg (ETH_PORT eth_port_num,
|
|
unsigned int phy_reg, unsigned int *value)
|
|
{
|
|
unsigned int reg_value;
|
|
unsigned int time_out = PHY_BUSY_TIMEOUT;
|
|
int phy_addr;
|
|
|
|
phy_addr = ethernet_phy_get (eth_port_num);
|
|
/* printf(" Phy-Port %d has addess %d \n",eth_port_num, phy_addr );*/
|
|
|
|
/* first check that it is not busy */
|
|
do {
|
|
reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
|
|
if (time_out-- == 0) {
|
|
return false;
|
|
}
|
|
}
|
|
while (reg_value & ETH_SMI_BUSY);
|
|
|
|
/* not busy */
|
|
|
|
MV_REG_WRITE (MV64360_ETH_SMI_REG,
|
|
(phy_addr << 16) | (phy_reg << 21) |
|
|
ETH_SMI_OPCODE_READ);
|
|
|
|
time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */
|
|
|
|
do {
|
|
reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
|
|
if (time_out-- == 0) {
|
|
return false;
|
|
}
|
|
}
|
|
while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */
|
|
|
|
/* Wait for the data to update in the SMI register */
|
|
#define PHY_UPDATE_TIMEOUT 10000
|
|
for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++);
|
|
|
|
reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
|
|
|
|
*value = reg_value & 0xffff;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_write_smi_reg - Write to PHY registers
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine utilize the SMI interface to interact with the PHY in
|
|
* order to perform writes to PHY registers.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* unsigned int phy_reg PHY register address offset.
|
|
* unsigned int value Register value.
|
|
*
|
|
* OUTPUT:
|
|
* Write the given value to the specified PHY register.
|
|
*
|
|
* RETURN:
|
|
* false if the PHY is busy.
|
|
* true otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static bool eth_port_write_smi_reg (ETH_PORT eth_port_num,
|
|
unsigned int phy_reg, unsigned int value)
|
|
{
|
|
unsigned int reg_value;
|
|
unsigned int time_out = PHY_BUSY_TIMEOUT;
|
|
int phy_addr;
|
|
|
|
phy_addr = ethernet_phy_get (eth_port_num);
|
|
|
|
/* first check that it is not busy */
|
|
do {
|
|
reg_value = MV_REG_READ (MV64360_ETH_SMI_REG);
|
|
if (time_out-- == 0) {
|
|
return false;
|
|
}
|
|
}
|
|
while (reg_value & ETH_SMI_BUSY);
|
|
|
|
/* not busy */
|
|
MV_REG_WRITE (MV64360_ETH_SMI_REG,
|
|
(phy_addr << 16) | (phy_reg << 21) |
|
|
ETH_SMI_OPCODE_WRITE | (value & 0xffff));
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_set_access_control - Config address decode parameters for Ethernet unit
|
|
*
|
|
* DESCRIPTION:
|
|
* This function configures the address decode parameters for the Gigabit
|
|
* Ethernet Controller according the given parameters struct.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum.
|
|
* ETH_WIN_PARAM *param Address decode parameter struct.
|
|
*
|
|
* OUTPUT:
|
|
* An access window is opened using the given access parameters.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_set_access_control (ETH_PORT eth_port_num,
|
|
ETH_WIN_PARAM * param)
|
|
{
|
|
unsigned int access_prot_reg;
|
|
|
|
/* Set access control register */
|
|
access_prot_reg = MV_REG_READ (MV64360_ETH_ACCESS_PROTECTION_REG
|
|
(eth_port_num));
|
|
access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */
|
|
access_prot_reg |= (param->access_ctrl << (param->win * 2));
|
|
MV_REG_WRITE (MV64360_ETH_ACCESS_PROTECTION_REG (eth_port_num),
|
|
access_prot_reg);
|
|
|
|
/* Set window Size reg (SR) */
|
|
MV_REG_WRITE ((MV64360_ETH_SIZE_REG_0 +
|
|
(ETH_SIZE_REG_GAP * param->win)),
|
|
(((param->size / 0x10000) - 1) << 16));
|
|
|
|
/* Set window Base address reg (BA) */
|
|
MV_REG_WRITE ((MV64360_ETH_BAR_0 + (ETH_BAR_GAP * param->win)),
|
|
(param->target | param->attributes | param->base_addr));
|
|
/* High address remap reg (HARR) */
|
|
if (param->win < 4)
|
|
MV_REG_WRITE ((MV64360_ETH_HIGH_ADDR_REMAP_REG_0 +
|
|
(ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)),
|
|
param->high_addr);
|
|
|
|
/* Base address enable reg (BARER) */
|
|
if (param->enable == 1)
|
|
MV_RESET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
|
|
(1 << param->win));
|
|
else
|
|
MV_SET_REG_BITS (MV64360_ETH_BASE_ADDR_ENABLE_REG,
|
|
(1 << param->win));
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
|
|
*
|
|
* DESCRIPTION:
|
|
* This function prepares a Rx chained list of descriptors and packet
|
|
* buffers in a form of a ring. The routine must be called after port
|
|
* initialization routine and before port start routine.
|
|
* The Ethernet SDMA engine uses CPU bus addresses to access the various
|
|
* devices in the system (i.e. DRAM). This function uses the ethernet
|
|
* struct 'virtual to physical' routine (set by the user) to set the ring
|
|
* with physical addresses.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE rx_queue Number of Rx queue.
|
|
* int rx_desc_num Number of Rx descriptors
|
|
* int rx_buff_size Size of Rx buffer
|
|
* unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
|
|
* unsigned int rx_buff_base_addr Rx buffer memory area base addr.
|
|
*
|
|
* OUTPUT:
|
|
* The routine updates the Ethernet port control struct with information
|
|
* regarding the Rx descriptors and buffers.
|
|
*
|
|
* RETURN:
|
|
* false if the given descriptors memory area is not aligned according to
|
|
* Ethernet SDMA specifications.
|
|
* true otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
|
|
ETH_QUEUE rx_queue,
|
|
int rx_desc_num,
|
|
int rx_buff_size,
|
|
unsigned int rx_desc_base_addr,
|
|
unsigned int rx_buff_base_addr)
|
|
{
|
|
ETH_RX_DESC *p_rx_desc;
|
|
ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */
|
|
unsigned int buffer_addr;
|
|
int ix; /* a counter */
|
|
|
|
|
|
p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr;
|
|
p_rx_prev_desc = p_rx_desc;
|
|
buffer_addr = rx_buff_base_addr;
|
|
|
|
/* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
|
|
if (rx_buff_base_addr & 0xF)
|
|
return false;
|
|
|
|
/* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */
|
|
if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE))
|
|
return false;
|
|
|
|
/* Rx buffers must be 64-bit aligned. */
|
|
if ((rx_buff_base_addr + rx_buff_size) & 0x7)
|
|
return false;
|
|
|
|
/* initialize the Rx descriptors ring */
|
|
for (ix = 0; ix < rx_desc_num; ix++) {
|
|
p_rx_desc->buf_size = rx_buff_size;
|
|
p_rx_desc->byte_cnt = 0x0000;
|
|
p_rx_desc->cmd_sts =
|
|
ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
|
|
p_rx_desc->next_desc_ptr =
|
|
((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE;
|
|
p_rx_desc->buf_ptr = buffer_addr;
|
|
p_rx_desc->return_info = 0x00000000;
|
|
D_CACHE_FLUSH_LINE (p_rx_desc, 0);
|
|
buffer_addr += rx_buff_size;
|
|
p_rx_prev_desc = p_rx_desc;
|
|
p_rx_desc = (ETH_RX_DESC *)
|
|
((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE);
|
|
}
|
|
|
|
/* Closing Rx descriptors ring */
|
|
p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr);
|
|
D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0);
|
|
|
|
/* Save Rx desc pointer to driver struct. */
|
|
CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
|
|
USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue);
|
|
|
|
p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] =
|
|
(ETH_RX_DESC *) rx_desc_base_addr;
|
|
p_eth_port_ctrl->rx_desc_area_size[rx_queue] =
|
|
rx_desc_num * RX_DESC_ALIGNED_SIZE;
|
|
|
|
p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
|
|
*
|
|
* DESCRIPTION:
|
|
* This function prepares a Tx chained list of descriptors and packet
|
|
* buffers in a form of a ring. The routine must be called after port
|
|
* initialization routine and before port start routine.
|
|
* The Ethernet SDMA engine uses CPU bus addresses to access the various
|
|
* devices in the system (i.e. DRAM). This function uses the ethernet
|
|
* struct 'virtual to physical' routine (set by the user) to set the ring
|
|
* with physical addresses.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE tx_queue Number of Tx queue.
|
|
* int tx_desc_num Number of Tx descriptors
|
|
* int tx_buff_size Size of Tx buffer
|
|
* unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
|
|
* unsigned int tx_buff_base_addr Tx buffer memory area base addr.
|
|
*
|
|
* OUTPUT:
|
|
* The routine updates the Ethernet port control struct with information
|
|
* regarding the Tx descriptors and buffers.
|
|
*
|
|
* RETURN:
|
|
* false if the given descriptors memory area is not aligned according to
|
|
* Ethernet SDMA specifications.
|
|
* true otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
|
|
ETH_QUEUE tx_queue,
|
|
int tx_desc_num,
|
|
int tx_buff_size,
|
|
unsigned int tx_desc_base_addr,
|
|
unsigned int tx_buff_base_addr)
|
|
{
|
|
|
|
ETH_TX_DESC *p_tx_desc;
|
|
ETH_TX_DESC *p_tx_prev_desc;
|
|
unsigned int buffer_addr;
|
|
int ix; /* a counter */
|
|
|
|
|
|
/* save the first desc pointer to link with the last descriptor */
|
|
p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr;
|
|
p_tx_prev_desc = p_tx_desc;
|
|
buffer_addr = tx_buff_base_addr;
|
|
|
|
/* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */
|
|
if (tx_buff_base_addr & 0xF)
|
|
return false;
|
|
|
|
/* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */
|
|
if ((tx_buff_size > TX_BUFFER_MAX_SIZE)
|
|
|| (tx_buff_size < TX_BUFFER_MIN_SIZE))
|
|
return false;
|
|
|
|
/* Initialize the Tx descriptors ring */
|
|
for (ix = 0; ix < tx_desc_num; ix++) {
|
|
p_tx_desc->byte_cnt = 0x0000;
|
|
p_tx_desc->l4i_chk = 0x0000;
|
|
p_tx_desc->cmd_sts = 0x00000000;
|
|
p_tx_desc->next_desc_ptr =
|
|
((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE;
|
|
|
|
p_tx_desc->buf_ptr = buffer_addr;
|
|
p_tx_desc->return_info = 0x00000000;
|
|
D_CACHE_FLUSH_LINE (p_tx_desc, 0);
|
|
buffer_addr += tx_buff_size;
|
|
p_tx_prev_desc = p_tx_desc;
|
|
p_tx_desc = (ETH_TX_DESC *)
|
|
((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE);
|
|
|
|
}
|
|
/* Closing Tx descriptors ring */
|
|
p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr;
|
|
D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0);
|
|
/* Set Tx desc pointer in driver struct. */
|
|
CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
|
|
USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue);
|
|
|
|
/* Init Tx ring base and size parameters */
|
|
p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] =
|
|
(ETH_TX_DESC *) tx_desc_base_addr;
|
|
p_eth_port_ctrl->tx_desc_area_size[tx_queue] =
|
|
(tx_desc_num * TX_DESC_ALIGNED_SIZE);
|
|
|
|
/* Add the queue to the list of Tx queues of this port */
|
|
p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_send - Send an Ethernet packet
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine send a given packet described by p_pktinfo parameter. It
|
|
* supports transmitting of a packet spaned over multiple buffers. The
|
|
* routine updates 'curr' and 'first' indexes according to the packet
|
|
* segment passed to the routine. In case the packet segment is first,
|
|
* the 'first' index is update. In any case, the 'curr' index is updated.
|
|
* If the routine get into Tx resource error it assigns 'curr' index as
|
|
* 'first'. This way the function can abort Tx process of multiple
|
|
* descriptors per packet.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE tx_queue Number of Tx queue.
|
|
* PKT_INFO *p_pkt_info User packet buffer.
|
|
*
|
|
* OUTPUT:
|
|
* Tx ring 'curr' and 'first' indexes are updated.
|
|
*
|
|
* RETURN:
|
|
* ETH_QUEUE_FULL in case of Tx resource error.
|
|
* ETH_ERROR in case the routine can not access Tx desc ring.
|
|
* ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource.
|
|
* ETH_OK otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
|
|
ETH_QUEUE tx_queue,
|
|
PKT_INFO * p_pkt_info)
|
|
{
|
|
volatile ETH_TX_DESC *p_tx_desc_first;
|
|
volatile ETH_TX_DESC *p_tx_desc_curr;
|
|
volatile ETH_TX_DESC *p_tx_next_desc_curr;
|
|
volatile ETH_TX_DESC *p_tx_desc_used;
|
|
unsigned int command_status;
|
|
|
|
/* Do not process Tx ring in case of Tx ring resource error */
|
|
if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
|
|
return ETH_QUEUE_FULL;
|
|
|
|
/* Get the Tx Desc ring indexes */
|
|
CURR_TFD_GET (p_tx_desc_curr, tx_queue);
|
|
USED_TFD_GET (p_tx_desc_used, tx_queue);
|
|
|
|
if (p_tx_desc_curr == NULL)
|
|
return ETH_ERROR;
|
|
|
|
/* The following parameters are used to save readings from memory */
|
|
p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue);
|
|
command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC;
|
|
|
|
if (command_status & (ETH_TX_FIRST_DESC)) {
|
|
/* Update first desc */
|
|
FIRST_TFD_SET (p_tx_desc_curr, tx_queue);
|
|
p_tx_desc_first = p_tx_desc_curr;
|
|
} else {
|
|
FIRST_TFD_GET (p_tx_desc_first, tx_queue);
|
|
command_status |= ETH_BUFFER_OWNED_BY_DMA;
|
|
}
|
|
|
|
/* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */
|
|
/* boundary. We use the memory allocated for Tx descriptor. This memory */
|
|
/* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */
|
|
if (p_pkt_info->byte_cnt <= 8) {
|
|
printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */
|
|
return ETH_ERROR;
|
|
|
|
p_tx_desc_curr->buf_ptr =
|
|
(unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC;
|
|
eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr,
|
|
p_pkt_info->byte_cnt);
|
|
} else
|
|
p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr;
|
|
|
|
p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt;
|
|
p_tx_desc_curr->return_info = p_pkt_info->return_info;
|
|
|
|
if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) {
|
|
/* Set last desc with DMA ownership and interrupt enable. */
|
|
p_tx_desc_curr->cmd_sts = command_status |
|
|
ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT;
|
|
|
|
if (p_tx_desc_curr != p_tx_desc_first)
|
|
p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA;
|
|
|
|
/* Flush CPU pipe */
|
|
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0);
|
|
CPU_PIPE_FLUSH;
|
|
|
|
/* Apply send command */
|
|
ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num);
|
|
|
|
/* Finish Tx packet. Update first desc in case of Tx resource error */
|
|
p_tx_desc_first = p_tx_next_desc_curr;
|
|
FIRST_TFD_SET (p_tx_desc_first, tx_queue);
|
|
|
|
} else {
|
|
p_tx_desc_curr->cmd_sts = command_status;
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0);
|
|
}
|
|
|
|
/* Check for ring index overlap in the Tx desc ring */
|
|
if (p_tx_next_desc_curr == p_tx_desc_used) {
|
|
/* Update the current descriptor */
|
|
CURR_TFD_SET (p_tx_desc_first, tx_queue);
|
|
|
|
p_eth_port_ctrl->tx_resource_err[tx_queue] = true;
|
|
return ETH_QUEUE_LAST_RESOURCE;
|
|
} else {
|
|
/* Update the current descriptor */
|
|
CURR_TFD_SET (p_tx_next_desc_curr, tx_queue);
|
|
return ETH_OK;
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_tx_return_desc - Free all used Tx descriptors
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine returns the transmitted packet information to the caller.
|
|
* It uses the 'first' index to support Tx desc return in case a transmit
|
|
* of a packet spanned over multiple buffer still in process.
|
|
* In case the Tx queue was in "resource error" condition, where there are
|
|
* no available Tx resources, the function resets the resource error flag.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE tx_queue Number of Tx queue.
|
|
* PKT_INFO *p_pkt_info User packet buffer.
|
|
*
|
|
* OUTPUT:
|
|
* Tx ring 'first' and 'used' indexes are updated.
|
|
*
|
|
* RETURN:
|
|
* ETH_ERROR in case the routine can not access Tx desc ring.
|
|
* ETH_RETRY in case there is transmission in process.
|
|
* ETH_END_OF_JOB if the routine has nothing to release.
|
|
* ETH_OK otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
|
|
p_eth_port_ctrl,
|
|
ETH_QUEUE tx_queue,
|
|
PKT_INFO * p_pkt_info)
|
|
{
|
|
volatile ETH_TX_DESC *p_tx_desc_used = NULL;
|
|
volatile ETH_TX_DESC *p_tx_desc_first = NULL;
|
|
unsigned int command_status;
|
|
|
|
|
|
/* Get the Tx Desc ring indexes */
|
|
USED_TFD_GET (p_tx_desc_used, tx_queue);
|
|
FIRST_TFD_GET (p_tx_desc_first, tx_queue);
|
|
|
|
|
|
/* Sanity check */
|
|
if (p_tx_desc_used == NULL)
|
|
return ETH_ERROR;
|
|
|
|
command_status = p_tx_desc_used->cmd_sts;
|
|
|
|
/* Still transmitting... */
|
|
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
|
|
return ETH_RETRY;
|
|
}
|
|
|
|
/* Stop release. About to overlap the current available Tx descriptor */
|
|
if ((p_tx_desc_used == p_tx_desc_first) &&
|
|
(p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) {
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
|
|
return ETH_END_OF_JOB;
|
|
}
|
|
|
|
/* Pass the packet information to the caller */
|
|
p_pkt_info->cmd_sts = command_status;
|
|
p_pkt_info->return_info = p_tx_desc_used->return_info;
|
|
p_tx_desc_used->return_info = 0;
|
|
|
|
/* Update the next descriptor to release. */
|
|
USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue);
|
|
|
|
/* Any Tx return cancels the Tx resource error status */
|
|
if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true)
|
|
p_eth_port_ctrl->tx_resource_err[tx_queue] = false;
|
|
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0);
|
|
|
|
return ETH_OK;
|
|
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_receive - Get received information from Rx ring.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine returns the received data to the caller. There is no
|
|
* data copying during routine operation. All information is returned
|
|
* using pointer to packet information struct passed from the caller.
|
|
* If the routine exhausts Rx ring resources then the resource error flag
|
|
* is set.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE rx_queue Number of Rx queue.
|
|
* PKT_INFO *p_pkt_info User packet buffer.
|
|
*
|
|
* OUTPUT:
|
|
* Rx ring current and used indexes are updated.
|
|
*
|
|
* RETURN:
|
|
* ETH_ERROR in case the routine can not access Rx desc ring.
|
|
* ETH_QUEUE_FULL if Rx ring resources are exhausted.
|
|
* ETH_END_OF_JOB if there is no received data.
|
|
* ETH_OK otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
|
|
ETH_QUEUE rx_queue,
|
|
PKT_INFO * p_pkt_info)
|
|
{
|
|
volatile ETH_RX_DESC *p_rx_curr_desc;
|
|
volatile ETH_RX_DESC *p_rx_next_curr_desc;
|
|
volatile ETH_RX_DESC *p_rx_used_desc;
|
|
unsigned int command_status;
|
|
|
|
/* Do not process Rx ring in case of Rx ring resource error */
|
|
if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) {
|
|
printf ("\nRx Queue is full ...\n");
|
|
return ETH_QUEUE_FULL;
|
|
}
|
|
|
|
/* Get the Rx Desc ring 'curr and 'used' indexes */
|
|
CURR_RFD_GET (p_rx_curr_desc, rx_queue);
|
|
USED_RFD_GET (p_rx_used_desc, rx_queue);
|
|
|
|
/* Sanity check */
|
|
if (p_rx_curr_desc == NULL)
|
|
return ETH_ERROR;
|
|
|
|
/* The following parameters are used to save readings from memory */
|
|
p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue);
|
|
command_status = p_rx_curr_desc->cmd_sts;
|
|
|
|
/* Nothing to receive... */
|
|
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
|
|
/* DP(printf("Rx: command_status: %08x\n", command_status)); */
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
|
|
/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
|
|
return ETH_END_OF_JOB;
|
|
}
|
|
|
|
p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET;
|
|
p_pkt_info->cmd_sts = command_status;
|
|
p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET;
|
|
p_pkt_info->return_info = p_rx_curr_desc->return_info;
|
|
p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */
|
|
|
|
/* Clean the return info field to indicate that the packet has been */
|
|
/* moved to the upper layers */
|
|
p_rx_curr_desc->return_info = 0;
|
|
|
|
/* Update 'curr' in data structure */
|
|
CURR_RFD_SET (p_rx_next_curr_desc, rx_queue);
|
|
|
|
/* Rx descriptors resource exhausted. Set the Rx ring resource error flag */
|
|
if (p_rx_next_curr_desc == p_rx_used_desc)
|
|
p_eth_port_ctrl->rx_resource_err[rx_queue] = true;
|
|
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
|
|
CPU_PIPE_FLUSH;
|
|
return ETH_OK;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine returns a Rx buffer back to the Rx ring. It retrieves the
|
|
* next 'used' descriptor and attached the returned buffer to it.
|
|
* In case the Rx ring was in "resource error" condition, where there are
|
|
* no available Rx resources, the function resets the resource error flag.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
|
|
* ETH_QUEUE rx_queue Number of Rx queue.
|
|
* PKT_INFO *p_pkt_info Information on the returned buffer.
|
|
*
|
|
* OUTPUT:
|
|
* New available Rx resource in Rx descriptor ring.
|
|
*
|
|
* RETURN:
|
|
* ETH_ERROR in case the routine can not access Rx desc ring.
|
|
* ETH_OK otherwise.
|
|
*
|
|
*******************************************************************************/
|
|
static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO *
|
|
p_eth_port_ctrl,
|
|
ETH_QUEUE rx_queue,
|
|
PKT_INFO * p_pkt_info)
|
|
{
|
|
volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */
|
|
|
|
/* Get 'used' Rx descriptor */
|
|
USED_RFD_GET (p_used_rx_desc, rx_queue);
|
|
|
|
/* Sanity check */
|
|
if (p_used_rx_desc == NULL)
|
|
return ETH_ERROR;
|
|
|
|
p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
|
|
p_used_rx_desc->return_info = p_pkt_info->return_info;
|
|
p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt;
|
|
p_used_rx_desc->buf_size = MV64360_RX_BUFFER_SIZE; /* Reset Buffer size */
|
|
|
|
/* Flush the write pipe */
|
|
CPU_PIPE_FLUSH;
|
|
|
|
/* Return the descriptor to DMA ownership */
|
|
p_used_rx_desc->cmd_sts =
|
|
ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
|
|
|
|
/* Flush descriptor and CPU pipe */
|
|
D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0);
|
|
CPU_PIPE_FLUSH;
|
|
|
|
/* Move the used descriptor pointer to the next descriptor */
|
|
USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue);
|
|
|
|
/* Any Rx return cancels the Rx resource error status */
|
|
if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true)
|
|
p_eth_port_ctrl->rx_resource_err[rx_queue] = false;
|
|
|
|
return ETH_OK;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine sets the RX coalescing interrupt mechanism parameter.
|
|
* This parameter is a timeout counter, that counts in 64 t_clk
|
|
* chunks ; that when timeout event occurs a maskable interrupt
|
|
* occurs.
|
|
* The parameter is calculated using the tClk of the MV-643xx chip
|
|
* , and the required delay of the interrupt in usec.
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet port number
|
|
* unsigned int t_clk t_clk of the MV-643xx chip in HZ units
|
|
* unsigned int delay Delay in usec
|
|
*
|
|
* OUTPUT:
|
|
* Interrupt coalescing mechanism value is set in MV-643xx chip.
|
|
*
|
|
* RETURN:
|
|
* The interrupt coalescing value set in the gigE port.
|
|
*
|
|
*******************************************************************************/
|
|
#if 0 /* FIXME */
|
|
static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num,
|
|
unsigned int t_clk,
|
|
unsigned int delay)
|
|
{
|
|
unsigned int coal;
|
|
|
|
coal = ((t_clk / 1000000) * delay) / 64;
|
|
/* Set RX Coalescing mechanism */
|
|
MV_REG_WRITE (MV64360_ETH_SDMA_CONFIG_REG (eth_port_num),
|
|
((coal & 0x3fff) << 8) |
|
|
(MV_REG_READ
|
|
(MV64360_ETH_SDMA_CONFIG_REG (eth_port_num))
|
|
& 0xffc000ff));
|
|
return coal;
|
|
}
|
|
|
|
#endif
|
|
/*******************************************************************************
|
|
* eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
|
|
*
|
|
* DESCRIPTION:
|
|
* This routine sets the TX coalescing interrupt mechanism parameter.
|
|
* This parameter is a timeout counter, that counts in 64 t_clk
|
|
* chunks ; that when timeout event occurs a maskable interrupt
|
|
* occurs.
|
|
* The parameter is calculated using the t_cLK frequency of the
|
|
* MV-643xx chip and the required delay in the interrupt in uSec
|
|
*
|
|
* INPUT:
|
|
* ETH_PORT eth_port_num Ethernet port number
|
|
* unsigned int t_clk t_clk of the MV-643xx chip in HZ units
|
|
* unsigned int delay Delay in uSeconds
|
|
*
|
|
* OUTPUT:
|
|
* Interrupt coalescing mechanism value is set in MV-643xx chip.
|
|
*
|
|
* RETURN:
|
|
* The interrupt coalescing value set in the gigE port.
|
|
*
|
|
*******************************************************************************/
|
|
#if 0 /* FIXME */
|
|
static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num,
|
|
unsigned int t_clk,
|
|
unsigned int delay)
|
|
{
|
|
unsigned int coal;
|
|
|
|
coal = ((t_clk / 1000000) * delay) / 64;
|
|
/* Set TX Coalescing mechanism */
|
|
MV_REG_WRITE (MV64360_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num),
|
|
coal << 4);
|
|
return coal;
|
|
}
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* eth_b_copy - Copy bytes from source to destination
|
|
*
|
|
* DESCRIPTION:
|
|
* This function supports the eight bytes limitation on Tx buffer size.
|
|
* The routine will zero eight bytes starting from the destination address
|
|
* followed by copying bytes from the source address to the destination.
|
|
*
|
|
* INPUT:
|
|
* unsigned int src_addr 32 bit source address.
|
|
* unsigned int dst_addr 32 bit destination address.
|
|
* int byte_count Number of bytes to copy.
|
|
*
|
|
* OUTPUT:
|
|
* See description.
|
|
*
|
|
* RETURN:
|
|
* None.
|
|
*
|
|
*******************************************************************************/
|
|
static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr,
|
|
int byte_count)
|
|
{
|
|
/* Zero the dst_addr area */
|
|
*(unsigned int *) dst_addr = 0x0;
|
|
|
|
while (byte_count != 0) {
|
|
*(char *) dst_addr = *(char *) src_addr;
|
|
dst_addr++;
|
|
src_addr++;
|
|
byte_count--;
|
|
}
|
|
}
|
|
|