upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
330 lines
12 KiB
330 lines
12 KiB
/*
|
|
* Copyright (C) 2004 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
*
|
|
* Support for Interphase iSPAN Communications Controllers
|
|
* (453x and others). Tested on 4532.
|
|
*
|
|
* Derived from iSPAN 4539 port (iphase4539) by
|
|
* Wolfgang Grandegger <wg@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */
|
|
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFE7A0000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Select serial console configuration
|
|
*
|
|
* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
|
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
|
* for SCC).
|
|
*
|
|
* If CONFIG_CONS_NONE is defined, then the serial console routines must be
|
|
* defined elsewhere (for example, on the cogent platform, there are serial
|
|
* ports on the motherboard which are used for the serial console - see
|
|
* cogent/cma101/serial.[ch]).
|
|
*/
|
|
#define CONFIG_CONS_ON_SMC /* Define if console on SMC */
|
|
#undef CONFIG_CONS_ON_SCC /* Define if console on SCC */
|
|
#undef CONFIG_CONS_NONE /* Define if console on something else */
|
|
#define CONFIG_CONS_INDEX 1 /* Which serial channel for console */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Select Ethernet configuration
|
|
*
|
|
* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
|
|
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
|
|
* for FCC).
|
|
*
|
|
* If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
|
|
* be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
|
|
*/
|
|
#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */
|
|
#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */
|
|
#undef CONFIG_ETHER_NONE /* Define if Ethernet on something else */
|
|
#define CONFIG_ETHER_INDEX 3 /* Which channel for Ethernrt */
|
|
|
|
#ifdef CONFIG_ETHER_ON_FCC
|
|
|
|
#if CONFIG_ETHER_INDEX == 3
|
|
|
|
#define CONFIG_SYS_PHY_ADDR 0
|
|
#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
|
|
#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
|
|
|
#endif /* CONFIG_ETHER_INDEX == 3 */
|
|
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#define CONFIG_BITBANGMII /* Bit-bang MII PHY management */
|
|
/*
|
|
* GPIO pins used for bit-banged MII communications
|
|
*/
|
|
#define MDIO_PORT 3 /* Port D */
|
|
#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
|
|
(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
|
|
#define MDC_DECLARE MDIO_DECLARE
|
|
|
|
|
|
#define CONFIG_SYS_MDIO_PIN 0x00040000 /* PD13 */
|
|
#define CONFIG_SYS_MDC_PIN 0x00080000 /* PD12 */
|
|
|
|
#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN)
|
|
#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
|
|
#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
|
|
|
|
#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \
|
|
else iop->pdat &= ~CONFIG_SYS_MDIO_PIN
|
|
|
|
#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \
|
|
else iop->pdat &= ~CONFIG_SYS_MDC_PIN
|
|
|
|
#define MIIDELAY udelay(1)
|
|
|
|
#endif /* CONFIG_ETHER_ON_FCC */
|
|
|
|
#define CONFIG_8260_CLKIN 65536000 /* in Hz */
|
|
#define CONFIG_BAUDRATE 38400
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_IMMAP
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */
|
|
#define CONFIG_BOOTARGS "root=/dev/ram rw"
|
|
|
|
#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
|
|
#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_LONGHELP /* #undef to save memory */
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0x09900000
|
|
|
|
#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#ifdef CONFIG_BZIP2
|
|
#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
|
|
#else
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
|
|
#endif /* CONFIG_BZIP2 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max num of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 142 /* Max num of sects on one chip */
|
|
|
|
/* Environment is in flash, there is little space left in Serial EEPROM */
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
|
|
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Hard Reset Configuration Words
|
|
*
|
|
* If you change bits in the HRCW, you must also change the CONFIG_SYS_*
|
|
* defines for the various registers affected by the HRCW e.g. changing
|
|
* HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
|
|
*/
|
|
/* 0x1686B245 */
|
|
#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\
|
|
HRCW_L2CPC10 | HRCW_ISB110 |\
|
|
HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\
|
|
HRCW_CS10PC01 | HRCW_MODCK_H0101 \
|
|
)
|
|
/* No slaves */
|
|
#define CONFIG_SYS_HRCW_SLAVE1 0
|
|
#define CONFIG_SYS_HRCW_SLAVE2 0
|
|
#define CONFIG_SYS_HRCW_SLAVE3 0
|
|
#define CONFIG_SYS_HRCW_SLAVE4 0
|
|
#define CONFIG_SYS_HRCW_SLAVE5 0
|
|
#define CONFIG_SYS_HRCW_SLAVE6 0
|
|
#define CONFIG_SYS_HRCW_SLAVE7 0
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Internal Memory Mapped Register
|
|
*/
|
|
#define CONFIG_SYS_IMMR 0xF0F00000
|
|
#ifdef CONFIG_SYS_REV_B
|
|
#define CONFIG_SYS_DEFAULT_IMMR 0xFF000000
|
|
#endif /* CONFIG_SYS_REV_B */
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* HIDx - Hardware Implementation-dependent Registers 2-11
|
|
*-----------------------------------------------------------------------
|
|
* HID0 also contains cache control.
|
|
*
|
|
* HID1 has only read-only information - nothing to set.
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
|
|
HID0_IFEM|HID0_ABE)
|
|
#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
|
|
#define CONFIG_SYS_HID2 0
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RMR - Reset Mode Register 5-5
|
|
*-----------------------------------------------------------------------
|
|
* turn on Checkstop Reset Enable
|
|
*/
|
|
#define CONFIG_SYS_RMR RMR_CSRE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* BCR - Bus Configuration 4-25
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_BCR 0xA01C0000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 4-31
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_SIUMCR 0x42250000/* 0x4205C000 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 4-35
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
|
|
*/
|
|
#if defined (CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
|
SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
|
|
#else
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
|
SYPCR_SWRI|SYPCR_SWP)
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TMCNTSC - Time Counter Status and Control 4-40
|
|
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
|
|
* and enable Time Counter
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 4-42
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
|
|
* Periodic timer
|
|
*/
|
|
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock Control 9-8
|
|
*-----------------------------------------------------------------------
|
|
* Ensure DFBRG is Divide by 16
|
|
*/
|
|
#define CONFIG_SYS_SCCR SCCR_DFBRG01
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RCCR - RISC Controller Configuration 13-7
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_RCCR 0
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Init Memory Controller:
|
|
*
|
|
* Bank Bus Machine PortSize Device
|
|
* ---- --- ------- ----------------------------- ------
|
|
* 0 60x GPCM 8 bit (Rev.B)/16 bit (Rev.D) Flash
|
|
* 1 60x SDRAM 64 bit SDRAM
|
|
* 2 Local SDRAM 32 bit SDRAM
|
|
*/
|
|
#define CONFIG_SYS_USE_FIRMWARE /* If defined - do not initialise memory
|
|
controller, rely on initialisation
|
|
performed by the Interphase boot firmware.
|
|
*/
|
|
|
|
#define CONFIG_SYS_OR0_PRELIM 0xFE000882
|
|
#ifdef CONFIG_SYS_REV_B
|
|
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_8 | BRx_V)
|
|
#else /* Rev. D */
|
|
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V)
|
|
#endif /* CONFIG_SYS_REV_B */
|
|
|
|
#define CONFIG_SYS_MPTPR 0x7F00
|
|
|
|
/* Please note that 60x SDRAM MUST start at 0 */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_60x_BR 0x00000041
|
|
#define CONFIG_SYS_60x_OR 0xF0002CD0
|
|
#define CONFIG_SYS_PSDMR 0x0049929A
|
|
#define CONFIG_SYS_PSRT 0x07
|
|
|
|
#define CONFIG_SYS_LSDRAM_BASE 0xF7000000
|
|
#define CONFIG_SYS_LOC_BR 0x00001861
|
|
#define CONFIG_SYS_LOC_OR 0xFF803280
|
|
#define CONFIG_SYS_LSDMR 0x8285A552
|
|
#define CONFIG_SYS_LSRT 0x07
|
|
|
|
#endif /* __CONFIG_H */
|
|
|