upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/ls1012aqds/ls1012aqds.c

257 lines
6.1 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2016 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <i2c.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#ifdef CONFIG_FSL_LS_PPA
#include <asm/arch/ppa.h>
#endif
#include <asm/arch/fdt.h>
#include <asm/arch/mmu.h>
#include <asm/arch/soc.h>
#include <ahci.h>
#include <hwconfig.h>
#include <mmc.h>
#include <scsi.h>
#include <fm_eth.h>
#include <fsl_esdhc.h>
#include <fsl_mmdc.h>
#include <spl.h>
#include <netdev.h>
#include "../common/qixis.h"
#include "ls1012aqds_qixis.h"
#include "ls1012aqds_pfe.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
char buf[64];
u8 sw;
sw = QIXIS_READ(arch);
printf("Board Arch: V%d, ", sw >> 4);
printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]);
if (sw & QIXIS_LBMAP_ALTBANK)
printf("flash: 2\n");
else
printf("flash: 1\n");
printf("FPGA: v%d (%s), build %d",
(int)QIXIS_READ(scver), qixis_read_tag(buf),
(int)qixis_read_minor());
/* the timestamp string contains "\n" at the end */
printf(" on %s", qixis_read_time(buf));
return 0;
}
int dram_init(void)
{
static const struct fsl_mmdc_info mparam = {
0x05180000, /* mdctl */
0x00030035, /* mdpdc */
0x12554000, /* mdotc */
0xbabf7954, /* mdcfg0 */
0xdb328f64, /* mdcfg1 */
0x01ff00db, /* mdcfg2 */
0x00001680, /* mdmisc */
0x0f3c8000, /* mdref */
0x00002000, /* mdrwd */
0x00bf1023, /* mdor */
0x0000003f, /* mdasp */
0x0000022a, /* mpodtctrl */
0xa1390003, /* mpzqhwctrl */
};
mmdc_init(&mparam);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
#endif
return 0;
}
int board_early_init_f(void)
{
fsl_lsch2_early_init_f();
return 0;
}
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
u8 mux_sdhc_cd = 0x80;
i2c_set_bus_num(0);
i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1);
return 0;
}
#endif
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
CONFIG_SYS_CCI400_OFFSET);
/* Set CCI-400 control override register to enable barrier
* transaction */
out_le32(&cci->ctrl_ord,
CCI400_CTRLORD_EN_BARRIER);
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
erratum_a010315();
#endif
#ifdef CONFIG_ENV_IS_NOWHERE
gd->env_addr = (ulong)&default_environment[0];
#endif
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
return 0;
}
int esdhc_status_fixup(void *blob, const char *compat)
{
char esdhc0_path[] = "/soc/esdhc@1560000";
char esdhc1_path[] = "/soc/esdhc@1580000";
u8 card_id;
do_fixup_by_path(blob, esdhc0_path, "status", "okay",
sizeof("okay"), 1);
/*
* The Presence Detect 2 register detects the installation
* of cards in various PCI Express or SGMII slots.
*
* STAT_PRS2[7:5]: Specifies the type of card installed in the
* SDHC2 Adapter slot. 0b111 indicates no adapter is installed.
*/
card_id = (QIXIS_READ(present2) & 0xe0) >> 5;
/* If no adapter is installed in SDHC2, disable SDHC2 */
if (card_id == 0x7)
do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
sizeof("disabled"), 1);
else
do_fixup_by_path(blob, esdhc1_path, "status", "okay",
sizeof("okay"), 1);
return 0;
}
static int pfe_set_properties(void *set_blob, struct pfe_prop_val prop_val,
char *enet_path, char *mdio_path)
{
do_fixup_by_path(set_blob, enet_path, "fsl,gemac-bus-id",
&prop_val.busid, PFE_PROP_LEN, 1);
do_fixup_by_path(set_blob, enet_path, "fsl,gemac-phy-id",
&prop_val.phyid, PFE_PROP_LEN, 1);
do_fixup_by_path(set_blob, enet_path, "fsl,mdio-mux-val",
&prop_val.mux_val, PFE_PROP_LEN, 1);
do_fixup_by_path(set_blob, enet_path, "phy-mode",
prop_val.phy_mode, strlen(prop_val.phy_mode) + 1, 1);
do_fixup_by_path(set_blob, mdio_path, "fsl,mdio-phy-mask",
&prop_val.phy_mask, PFE_PROP_LEN, 1);
return 0;
}
static void fdt_fsl_fixup_of_pfe(void *blob)
{
int i = 0;
struct pfe_prop_val prop_val;
void *l_blob = blob;
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
unsigned int srds_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
for (i = 0; i < NUM_ETH_NODE; i++) {
switch (srds_s1) {
case SERDES_1_G_PROTOCOL:
if (i == 0) {
prop_val.busid = cpu_to_fdt32(
ETH_1_1G_BUS_ID);
prop_val.phyid = cpu_to_fdt32(
ETH_1_1G_PHY_ID);
prop_val.mux_val = cpu_to_fdt32(
ETH_1_1G_MDIO_MUX);
prop_val.phy_mask = cpu_to_fdt32(
ETH_1G_MDIO_PHY_MASK);
prop_val.phy_mode = "sgmii";
pfe_set_properties(l_blob, prop_val, ETH_1_PATH,
ETH_1_MDIO);
} else {
prop_val.busid = cpu_to_fdt32(
ETH_2_1G_BUS_ID);
prop_val.phyid = cpu_to_fdt32(
ETH_2_1G_PHY_ID);
prop_val.mux_val = cpu_to_fdt32(
ETH_2_1G_MDIO_MUX);
prop_val.phy_mask = cpu_to_fdt32(
ETH_1G_MDIO_PHY_MASK);
prop_val.phy_mode = "rgmii";
pfe_set_properties(l_blob, prop_val, ETH_2_PATH,
ETH_2_MDIO);
}
break;
case SERDES_2_5_G_PROTOCOL:
if (i == 0) {
prop_val.busid = cpu_to_fdt32(
ETH_1_2_5G_BUS_ID);
prop_val.phyid = cpu_to_fdt32(
ETH_1_2_5G_PHY_ID);
prop_val.mux_val = cpu_to_fdt32(
ETH_1_2_5G_MDIO_MUX);
prop_val.phy_mask = cpu_to_fdt32(
ETH_2_5G_MDIO_PHY_MASK);
prop_val.phy_mode = "sgmii-2500";
pfe_set_properties(l_blob, prop_val, ETH_1_PATH,
ETH_1_MDIO);
} else {
prop_val.busid = cpu_to_fdt32(
ETH_2_2_5G_BUS_ID);
prop_val.phyid = cpu_to_fdt32(
ETH_2_2_5G_PHY_ID);
prop_val.mux_val = cpu_to_fdt32(
ETH_2_2_5G_MDIO_MUX);
prop_val.phy_mask = cpu_to_fdt32(
ETH_2_5G_MDIO_PHY_MASK);
prop_val.phy_mode = "sgmii-2500";
pfe_set_properties(l_blob, prop_val, ETH_2_PATH,
ETH_2_MDIO);
}
break;
default:
printf("serdes:[%d]\n", srds_s1);
}
}
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
arch_fixup_fdt(blob);
ft_cpu_setup(blob, bd);
fdt_fsl_fixup_of_pfe(blob);
return 0;
}
#endif