upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
469 lines
17 KiB
469 lines
17 KiB
/*
|
|
* (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
|
|
*
|
|
* (C) Copyright 2006
|
|
* Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/fsl_upm.h>
|
|
#include <ioports.h>
|
|
|
|
#include <nand.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern uint get_lbc_clock (void);
|
|
|
|
/* index of UPM RAM array run pattern for NAND command cycle */
|
|
#define CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS 0x08
|
|
|
|
/* index of UPM RAM array run pattern for NAND address cycle */
|
|
#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x10
|
|
|
|
/* Structure for table with supported UPM timings */
|
|
struct upm_freq {
|
|
ulong freq;
|
|
const u32 *upm_patt;
|
|
uchar gpl4_disable;
|
|
uchar ehtr;
|
|
uchar ead;
|
|
};
|
|
|
|
/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
|
|
|
|
/* UPM pattern for bus clock = 25 MHz */
|
|
static const u32 upm_patt_25[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
|
|
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 33.3 MHz */
|
|
static const u32 upm_patt_33[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
|
|
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 41.7 MHz */
|
|
static const u32 upm_patt_42[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
|
|
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 50 MHz */
|
|
static const u32 upm_patt_50[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
|
|
/* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 66.7 MHz */
|
|
static const u32 upm_patt_67[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
|
|
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 83.3 MHz */
|
|
static const u32 upm_patt_83[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
|
|
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 100 MHz */
|
|
static const u32 upm_patt_100[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
|
|
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 133.3 MHz */
|
|
static const u32 upm_patt_133[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
|
|
/* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* UPM pattern for bus clock = 166.7 MHz */
|
|
static const u32 upm_patt_167[] = {
|
|
/* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
|
|
/* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
|
|
/* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write CMD */
|
|
/* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
|
|
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Read Burst RAM array entry -> NAND Write ADDR */
|
|
/* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
|
|
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Single RAM array entry -> NAND Write Data */
|
|
/* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
|
|
/* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
|
|
/* UPM Write Burst RAM array entry -> unused */
|
|
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Refresh Timer RAM array entry -> unused */
|
|
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
|
|
/* UPM Exception RAM array entry -> unsused */
|
|
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
};
|
|
|
|
/* Supported UPM timings */
|
|
struct upm_freq upm_freq_table[] = {
|
|
/* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
|
|
{25000000, upm_patt_25, 1, 0, 0},
|
|
{33333333, upm_patt_33, 1, 0, 0},
|
|
{41666666, upm_patt_42, 1, 0, 0},
|
|
{50000000, upm_patt_50, 0, 0, 0},
|
|
{66666666, upm_patt_67, 0, 0, 0},
|
|
{83333333, upm_patt_83, 0, 0, 0},
|
|
{100000000, upm_patt_100, 0, 1, 1},
|
|
{133333333, upm_patt_133, 0, 1, 1},
|
|
{166666666, upm_patt_167, 0, 1, 1},
|
|
};
|
|
|
|
#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
|
|
|
|
volatile const u32 *nand_upm_patt;
|
|
|
|
/*
|
|
* write into UPMB ram
|
|
*/
|
|
static void upmb_write (u_char addr, ulong val)
|
|
{
|
|
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
|
|
|
|
out_be32 (&lbc->mdr, val);
|
|
|
|
clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
|
|
MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
|
|
|
|
/* dummy access to perform write */
|
|
out_8 ((void __iomem *)CONFIG_SYS_NAND0_BASE, 0);
|
|
|
|
clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
|
|
}
|
|
|
|
/*
|
|
* Initialize UPM for NAND flash access.
|
|
*/
|
|
static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
|
|
{
|
|
uint i, j;
|
|
uint or3 = CONFIG_SYS_OR3_PRELIM;
|
|
uint clock = get_lbc_clock ();
|
|
|
|
out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */
|
|
out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM);
|
|
|
|
/*
|
|
* Search appropriate UPM table for bus clock.
|
|
* If the bus clock exceeds a tolerated value, take the UPM timing for
|
|
* the next higher supported frequency to ensure that access works
|
|
* (even the access may be slower then).
|
|
*/
|
|
for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
|
|
;
|
|
|
|
if (i >= UPM_FREQS)
|
|
/* no valid entry found */
|
|
/* take last entry with configuration for max. bus clock */
|
|
i--;
|
|
|
|
if (upm_freq_table[i].ehtr) {
|
|
/* EHTR must be set due to TQM8548 timing specification */
|
|
or3 |= OR_UPM_EHTR;
|
|
}
|
|
if (upm_freq_table[i].ead)
|
|
/* EAD must be set due to TQM8548 timing specification */
|
|
or3 |= OR_UPM_EAD;
|
|
|
|
out_be32 (&lbc->or3, or3);
|
|
|
|
/* Assign address of table */
|
|
nand_upm_patt = upm_freq_table[i].upm_patt;
|
|
|
|
for (j = 0; j < 64; j++) {
|
|
upmb_write (j, *nand_upm_patt);
|
|
nand_upm_patt++;
|
|
}
|
|
|
|
/* Put UPM back to normal operation mode */
|
|
if (upm_freq_table[i].gpl4_disable)
|
|
/* GPL4 must be disabled according to timing specification */
|
|
out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct fsl_upm_nand fun = {
|
|
.width = 8,
|
|
.upm_cmd_offset = 0x08,
|
|
.upm_addr_offset = 0x10,
|
|
.chip_delay = NAND_BIG_DELAY_US,
|
|
};
|
|
|
|
void board_nand_select_device (struct nand_chip *nand, int chip)
|
|
{
|
|
}
|
|
|
|
int board_nand_init (struct nand_chip *nand)
|
|
{
|
|
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
|
|
|
|
if (!nand_upm_patt)
|
|
nand_upm_setup (lbc);
|
|
|
|
fun.upm.io_addr = nand->IO_ADDR_R;
|
|
fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
|
|
fun.upm.mdr = (void __iomem *)&lbc->mdr;
|
|
fun.upm.mar = (void __iomem *)&lbc->mar;
|
|
|
|
return fsl_upm_nand_init (nand, &fun);
|
|
}
|
|
|