upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
484 lines
12 KiB
484 lines
12 KiB
|
|
/*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
|
|
struct sdram_conf_s {
|
|
unsigned long size;
|
|
unsigned long reg;
|
|
#ifdef CONFIG_TQM8548
|
|
unsigned long refresh;
|
|
#endif /* CONFIG_TQM8548 */
|
|
};
|
|
|
|
typedef struct sdram_conf_s sdram_conf_t;
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
#ifdef CONFIG_TQM8548_AG
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(1024 << 20), 0x80044202, 0x0002D000}, /* 1024MB, 14x10(4) */
|
|
{ (512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
|
|
{ (256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
|
|
{ (128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
|
|
};
|
|
#else /* !CONFIG_TQM8548_AG */
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
|
|
{(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
|
|
{(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
|
|
};
|
|
#endif /* CONFIG_TQM8548_AG */
|
|
#else /* !CONFIG_TQM8548 */
|
|
sdram_conf_t ddr_cs_conf[] = {
|
|
{(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
|
|
{(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
|
|
{(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
|
|
{( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
|
|
};
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
|
|
|
|
int cas_latency (void);
|
|
|
|
/*
|
|
* Autodetect onboard DDR SDRAM on 85xx platforms
|
|
*
|
|
* NOTE: Some of the hardcoded values are hardware dependant,
|
|
* so this should be extended for other future boards
|
|
* using this routine!
|
|
*/
|
|
long int sdram_setup (int casl)
|
|
{
|
|
int i;
|
|
volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
|
|
#ifdef CONFIG_TQM8548
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
#endif
|
|
#else /* !CONFIG_TQM8548 */
|
|
unsigned long cfg_ddr_timing1;
|
|
unsigned long cfg_ddr_mode;
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
/*
|
|
* Disable memory controller.
|
|
*/
|
|
ddr->cs0_config = 0;
|
|
ddr->sdram_cfg = 0;
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
/* Timing and refresh settings for DDR2-533 and below */
|
|
|
|
ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
|
|
ddr->cs0_config = ddr_cs_conf[0].reg;
|
|
ddr->timing_cfg_3 = 0x00020000;
|
|
|
|
/* TIMING CFG 1, 533MHz
|
|
* PRETOACT: 4 Clocks
|
|
* ACTTOPRE: 12 Clocks
|
|
* ACTTORW: 4 Clocks
|
|
* CASLAT: 4 Clocks
|
|
* REFREC: EXT_REFREC:REFREC 53 Clocks
|
|
* WRREC: 4 Clocks
|
|
* ACTTOACT: 3 Clocks
|
|
* WRTORD: 2 Clocks
|
|
*/
|
|
ddr->timing_cfg_1 = 0x4C47D432;
|
|
|
|
/* TIMING CFG 2, 533MHz
|
|
* ADD_LAT: 3 Clocks
|
|
* CPO: READLAT + 1
|
|
* WR_LAT: 3 Clocks
|
|
* RD_TO_PRE: 2 Clocks
|
|
* WR_DATA_DELAY: 1/2 Clock
|
|
* CKE_PLS: 3 Clock
|
|
* FOUR_ACT: 14 Clocks
|
|
*/
|
|
ddr->timing_cfg_2 = 0x331848CE;
|
|
|
|
/* DDR SDRAM Mode, 533MHz
|
|
* MRS: Extended Mode Register
|
|
* OUT: Outputs enabled
|
|
* RDQS: no
|
|
* DQS: enabled
|
|
* OCD: default state
|
|
* RTT: 75 Ohms
|
|
* Posted CAS: 3 Clocks
|
|
* ODS: reduced strength
|
|
* DLL: enabled
|
|
* MR: Mode Register
|
|
* PD: fast exit
|
|
* WR: 4 Clocks
|
|
* DLL: no DLL reset
|
|
* TM: normal
|
|
* CAS latency: 4 Clocks
|
|
* BT: sequential
|
|
* Burst length: 4
|
|
*/
|
|
ddr->sdram_mode = 0x439E0642;
|
|
|
|
/* DDR SDRAM Interval, 533MHz
|
|
* REFINT: 1040 Clocks
|
|
* BSTOPRE: 256
|
|
*/
|
|
ddr->sdram_interval = (1040 << 16) | 0x100;
|
|
|
|
/*
|
|
* Workaround for erratum DDR19 according to MPC8548 Device Errata
|
|
* document, Rev. 1: DDR IO receiver must be set to an acceptable
|
|
* bias point by modifying a hidden register.
|
|
*/
|
|
if (SVR_REV (get_svr ()) < 0x21)
|
|
gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */
|
|
|
|
/* DDR SDRAM CFG 2
|
|
* FRC_SR: normal mode
|
|
* SR_IE: no self-refresh interrupt
|
|
* DLL_RST_DIS: don't care, leave at reset value
|
|
* DQS_CFG: differential DQS signals
|
|
* ODT_CFG: assert ODT to internal IOs only during reads to DRAM
|
|
* LVWx_CFG: don't care, leave at reset value
|
|
* NUM_PR: 1 refresh will be issued at a time
|
|
* DM_CFG: don't care, leave at reset value
|
|
* D_INIT: no data initialization
|
|
*/
|
|
ddr->sdram_cfg_2 = 0x04401000;
|
|
|
|
/* DDR SDRAM MODE 2
|
|
* MRS: Extended Mode Register 2
|
|
*/
|
|
ddr->sdram_mode_2 = 0x8000C000;
|
|
|
|
/* DDR SDRAM CLK CNTL
|
|
* CLK_ADJUST: 1/2 Clock 0x02000000
|
|
* CLK_ADJUST: 5/8 Clock 0x02800000
|
|
*/
|
|
ddr->sdram_clk_cntl = 0x02800000;
|
|
|
|
/* wait for clock stabilization */
|
|
asm ("sync;isync;msync");
|
|
udelay (1000);
|
|
|
|
#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
|
|
/*
|
|
* Workaround for erratum DDR20 according to MPC8548 Device Errata
|
|
* document, Rev. 1: "CKE signal may not function correctly after
|
|
* assertion of HRESET"
|
|
*/
|
|
|
|
/* 1. Configure DDR register as is done in normal DDR configuration.
|
|
* Do not set DDR_SDRAM_CFG[MEM_EN].
|
|
*
|
|
* 2. Set reserved bit EEBACR[3] at offset 0x1000
|
|
*/
|
|
ecm->eebacr |= 0x10000000;
|
|
|
|
/*
|
|
* 3. Before DDR_SDRAM_CFG[MEM_EN] is set, write DDR_SDRAM_CFG_2[D_INIT]
|
|
*
|
|
* DDR_SDRAM_CFG_2:
|
|
* FRC_SR: normal mode
|
|
* SR_IE: no self-refresh interrupt
|
|
* DLL_RST_DIS: don't care, leave at reset value
|
|
* DQS_CFG: differential DQS signals
|
|
* ODT_CFG: assert ODT to internal IOs only during reads to DRAM
|
|
* LVWx_CFG: don't care, leave at reset value
|
|
* NUM_PR: 1 refresh will be issued at a time
|
|
* DM_CFG: don't care, leave at reset value
|
|
* D_INIT: enable data initialization
|
|
*/
|
|
ddr->sdram_cfg_2 |= 0x00000010;
|
|
|
|
/*
|
|
* 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data
|
|
* training
|
|
*/
|
|
ddr->debug_3 |= 0x00000400;
|
|
|
|
/*
|
|
* 5. Wait 200 micro-seconds
|
|
*/
|
|
udelay (200);
|
|
|
|
/*
|
|
* 6. Set DDR_SDRAM_CFG[MEM_EN]
|
|
*
|
|
* BTW, initialize DDR_SDRAM_CFG:
|
|
* MEM_EN: enabled
|
|
* SREN: don't care, leave at reset value
|
|
* ECC_EN: no error report
|
|
* RD_EN: no registered DIMMs
|
|
* SDRAM_TYPE: DDR2
|
|
* DYN_PWR: no power management
|
|
* 32_BE: don't care, leave at reset value
|
|
* 8_BE: 4 beat burst
|
|
* NCAP: don't care, leave at reset value
|
|
* 2T_EN: 1T Timing
|
|
* BA_INTLV_CTL: no interleaving
|
|
* x32_EN: x16 organization
|
|
* PCHB8: MA[10] for auto-precharge
|
|
* HSE: half strength for single and 2-layer stacks
|
|
* (full strength for 3- and 4-layer stacks not
|
|
* yet considered)
|
|
* MEM_HALT: no halt
|
|
* BI: automatic initialization
|
|
*/
|
|
ddr->sdram_cfg = 0x83000008;
|
|
|
|
/*
|
|
* 7. Poll DDR_SDRAM_CFG_2[D_INIT] until it is cleared by hardware
|
|
*/
|
|
asm ("sync;isync;msync");
|
|
while (ddr->sdram_cfg_2 & 0x00000010)
|
|
asm ("eieio");
|
|
|
|
/*
|
|
* 8. Clear D3[21] to re-enable data training
|
|
*/
|
|
ddr->debug_3 &= ~0x00000400;
|
|
|
|
/*
|
|
* 9. Set D2(21) to force data training to run
|
|
*/
|
|
ddr->debug_2 |= 0x00000400;
|
|
|
|
/*
|
|
* 10. Poll on D2[21] until it is cleared by hardware
|
|
*/
|
|
asm ("sync;isync;msync");
|
|
while (ddr->debug_2 & 0x00000400)
|
|
asm ("eieio");
|
|
|
|
/*
|
|
* 11. Clear reserved bit EEBACR[3] at offset 0x1000
|
|
*/
|
|
ecm->eebacr &= ~0x10000000;
|
|
|
|
#else /* !(CONFIG_TQM8548_AG || CONFIG_TQM8548_BE) */
|
|
|
|
/* DDR SDRAM CLK CNTL
|
|
* MEM_EN: enabled
|
|
* SREN: don't care, leave at reset value
|
|
* ECC_EN: no error report
|
|
* RD_EN: no register DIMMs
|
|
* SDRAM_TYPE: DDR2
|
|
* DYN_PWR: no power management
|
|
* 32_BE: don't care, leave at reset value
|
|
* 8_BE: 4 beat burst
|
|
* NCAP: don't care, leave at reset value
|
|
* 2T_EN: 1T Timing
|
|
* BA_INTLV_CTL: no interleaving
|
|
* x32_EN: x16 organization
|
|
* PCHB8: MA[10] for auto-precharge
|
|
* HSE: half strength for single and 2-layer stacks
|
|
* (full strength for 3- and 4-layer stacks no yet considered)
|
|
* MEM_HALT: no halt
|
|
* BI: automatic initialization
|
|
*/
|
|
ddr->sdram_cfg = 0x83000008;
|
|
|
|
#endif /* CONFIG_TQM8548_AG || CONFIG_TQM8548_BE */
|
|
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
#else /* !CONFIG_TQM8548 */
|
|
switch (casl) {
|
|
case 20:
|
|
cfg_ddr_timing1 = 0x47405331 | (3 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (2 << 4);
|
|
break;
|
|
|
|
case 25:
|
|
cfg_ddr_timing1 = 0x47405331 | (4 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (6 << 4);
|
|
break;
|
|
|
|
case 30:
|
|
default:
|
|
cfg_ddr_timing1 = 0x47405331 | (5 << 16);
|
|
cfg_ddr_mode = 0x40020002 | (3 << 4);
|
|
break;
|
|
}
|
|
|
|
ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
|
|
ddr->cs0_config = ddr_cs_conf[0].reg;
|
|
ddr->timing_cfg_1 = cfg_ddr_timing1;
|
|
ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
|
|
ddr->sdram_mode = cfg_ddr_mode;
|
|
ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
|
|
ddr->err_disable = 0x0000000D;
|
|
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
|
|
ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
|
|
asm ("sync; isync; msync");
|
|
udelay (1000);
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
for (i = 0; i < N_DDR_CS_CONF; i++) {
|
|
ddr->cs0_config = ddr_cs_conf[i].reg;
|
|
|
|
if (get_ram_size (0, ddr_cs_conf[i].size) ==
|
|
ddr_cs_conf[i].size) {
|
|
/*
|
|
* size detected -> set Chip Select Bounds Register
|
|
*/
|
|
ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_TQM8548
|
|
if (i < N_DDR_CS_CONF) {
|
|
/* Adjust refresh rate for DDR2 */
|
|
|
|
ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
|
|
|
|
ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
|
|
(ddr_cs_conf[i].refresh & 0x0000F000);
|
|
|
|
return ddr_cs_conf[i].size;
|
|
}
|
|
#endif /* CONFIG_TQM8548 */
|
|
|
|
/* return size if detected, else return 0 */
|
|
return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
|
|
}
|
|
|
|
void board_add_ram_info (int use_default)
|
|
{
|
|
int casl;
|
|
|
|
if (use_default)
|
|
casl = CONFIG_DDR_DEFAULT_CL;
|
|
else
|
|
casl = cas_latency ();
|
|
|
|
puts (" (CL=");
|
|
switch (casl) {
|
|
case 20:
|
|
puts ("2)");
|
|
break;
|
|
|
|
case 25:
|
|
puts ("2.5)");
|
|
break;
|
|
|
|
case 30:
|
|
puts ("3)");
|
|
break;
|
|
}
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
int casl;
|
|
|
|
#if defined(CONFIG_DDR_DLL)
|
|
/*
|
|
* This DLL-Override only used on TQM8540 and TQM8560
|
|
*/
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int i, x;
|
|
|
|
x = 10;
|
|
|
|
/*
|
|
* Work around to stabilize DDR DLL
|
|
*/
|
|
gur->ddrdllcr = 0x81000000;
|
|
asm ("sync; isync; msync");
|
|
udelay (200);
|
|
while (gur->ddrdllcr != 0x81000100) {
|
|
gur->devdisr = gur->devdisr | 0x00010000;
|
|
asm ("sync; isync; msync");
|
|
for (i = 0; i < x; i++)
|
|
;
|
|
gur->devdisr = gur->devdisr & 0xfff7ffff;
|
|
asm ("sync; isync; msync");
|
|
x++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
casl = cas_latency ();
|
|
dram_size = sdram_setup (casl);
|
|
if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
|
|
/*
|
|
* Try again with default CAS latency
|
|
*/
|
|
puts ("Problem with CAS lantency");
|
|
board_add_ram_info (1);
|
|
puts (", using default CL!\n");
|
|
casl = CONFIG_DDR_DEFAULT_CL;
|
|
dram_size = sdram_setup (casl);
|
|
puts (" ");
|
|
}
|
|
|
|
return dram_size;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
|
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
|
uint *p;
|
|
|
|
printf ("SDRAM test phase 1:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf ("SDRAM test phase 2:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
printf ("SDRAM test passed.\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|