upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
173 lines
5.4 KiB
173 lines
5.4 KiB
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2011-2012
|
|
* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
|
|
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
|
|
*/
|
|
|
|
/*
|
|
* for linking errors see
|
|
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
|
|
*/
|
|
|
|
#ifndef _CONFIG_KM_KIRKWOOD_H
|
|
#define _CONFIG_KM_KIRKWOOD_H
|
|
|
|
/* KM_KIRKWOOD */
|
|
#if defined(CONFIG_KM_KIRKWOOD)
|
|
#define CONFIG_HOSTNAME "km_kirkwood"
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
/* KM_KIRKWOOD_PCI */
|
|
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
|
|
#define CONFIG_HOSTNAME "km_kirkwood_pci"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
|
|
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
|
|
|
|
/* KM_KIRKWOOD_128M16 */
|
|
#elif defined(CONFIG_KM_KIRKWOOD_128M16)
|
|
#define CONFIG_HOSTNAME "km_kirkwood_128m16"
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
/* KM_NUSA / KM_SUGP1 */
|
|
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
# if defined(CONFIG_KM_NUSA)
|
|
#define CONFIG_HOSTNAME "kmnusa"
|
|
# elif defined(CONFIG_KM_SUGP1)
|
|
#define CONFIG_HOSTNAME "kmsugp1"
|
|
#define KM_PCIE_RESET_MPP7
|
|
#endif
|
|
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_PIGGY4_88E6352
|
|
#define CONFIG_MV88E6352_SWITCH
|
|
#define CONFIG_KM_MVEXTSW_ADDR 0x10
|
|
|
|
/* KM_MGCOGE3UN */
|
|
#elif defined(CONFIG_KM_MGCOGE3UN)
|
|
#define CONFIG_HOSTNAME "mgcoge3un"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
|
|
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
|
|
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_PIGGY4_88E6061
|
|
|
|
/* KMCOGE5UN */
|
|
#elif defined(CONFIG_KM_COGE5UN)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
|
|
#define CONFIG_HOSTNAME "kmcoge5un"
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_PIGGY4_88E6352
|
|
|
|
/* KM_PORTL2 */
|
|
#elif defined(CONFIG_KM_PORTL2)
|
|
#define CONFIG_HOSTNAME "portl2"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_KM_PIGGY4_88E6061
|
|
|
|
/* KM_SUV31 */
|
|
#elif defined(CONFIG_KM_SUV31)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_HOSTNAME "kmsuv31"
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
|
|
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
|
|
#else
|
|
#error ("Board unsupported")
|
|
#endif
|
|
|
|
/* include common defines/options for all arm based Keymile boards */
|
|
#include "km/km_arm.h"
|
|
|
|
#if defined(CONFIG_KM_PIGGY4_88E6352)
|
|
/*
|
|
* Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
|
|
* an Marvell 88E6352 simple switch.
|
|
* In this case we have to change the default settings for the etherent mac.
|
|
* There is NO ethernet phy. The ARM and Switch are conencted directly over
|
|
* RGMII in MAC-MAC mode
|
|
* In this case 1GBit full duplex and autoneg off
|
|
*/
|
|
#define PORT_SERIAL_CONTROL_VALUE ( \
|
|
MVGBE_FORCE_LINK_PASS | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
|
|
MVGBE_ADV_NO_FLOW_CTRL | \
|
|
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
|
|
MVGBE_FORCE_BP_MODE_NO_JAM | \
|
|
(1 << 9) /* Reserved bit has to be 1 */ | \
|
|
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
|
|
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
|
|
MVGBE_DTE_ADV_0 | \
|
|
MVGBE_MIIPHY_MAC_MODE | \
|
|
MVGBE_AUTO_NEG_NO_CHANGE | \
|
|
MVGBE_MAX_RX_PACKET_1552BYTE | \
|
|
MVGBE_CLR_EXT_LOOPBACK | \
|
|
MVGBE_SET_FULL_DUPLEX_MODE | \
|
|
MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
|
|
MVGBE_SET_GMII_SPEED_TO_1000 |\
|
|
MVGBE_SET_MII_SPEED_TO_100)
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_KM_PIGGY4_88E6061
|
|
/*
|
|
* Some keymile boards like mgcoge3un have their PIGGY4 connected via
|
|
* an Marvell 88E6061 simple switch.
|
|
* In this case we have to change the default settings for the
|
|
* ethernet phy connected to the kirkwood.
|
|
* In this case 100MB full duplex and autoneg off
|
|
*/
|
|
#define PORT_SERIAL_CONTROL_VALUE ( \
|
|
MVGBE_FORCE_LINK_PASS | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
|
|
MVGBE_ADV_NO_FLOW_CTRL | \
|
|
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
|
|
MVGBE_FORCE_BP_MODE_NO_JAM | \
|
|
(1 << 9) /* Reserved bit has to be 1 */ | \
|
|
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
|
|
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
|
|
MVGBE_DTE_ADV_0 | \
|
|
MVGBE_MIIPHY_MAC_MODE | \
|
|
MVGBE_AUTO_NEG_NO_CHANGE | \
|
|
MVGBE_MAX_RX_PACKET_1552BYTE | \
|
|
MVGBE_CLR_EXT_LOOPBACK | \
|
|
MVGBE_SET_FULL_DUPLEX_MODE | \
|
|
MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
|
|
MVGBE_SET_GMII_SPEED_TO_10_100 |\
|
|
MVGBE_SET_MII_SPEED_TO_100)
|
|
#endif
|
|
|
|
#ifdef CONFIG_KM_DISABLE_PCI
|
|
#undef CONFIG_KIRKWOOD_PCIE_INIT
|
|
#endif
|
|
|
|
#endif /* _CONFIG_KM_KIRKWOOD */
|
|
|