upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
163 lines
5.4 KiB
163 lines
5.4 KiB
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* (C) Copyright 2012-2016 Stephen Warren
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/timer.h>
|
|
|
|
#if defined(CONFIG_TARGET_RPI_2) || defined(CONFIG_TARGET_RPI_3_32B)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
/* Architecture, CPU, etc.*/
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
/* Use SoC timer for AArch32, but architected timer for AArch64 */
|
|
#ifndef CONFIG_ARM64
|
|
#define CONFIG_SYS_TIMER_RATE 1000000
|
|
#define CONFIG_SYS_TIMER_COUNTER \
|
|
(&((struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR)->clo)
|
|
#endif
|
|
|
|
/*
|
|
* 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
|
|
* so 2708 has historically been used rather than a dedicated 2835 ID.
|
|
*
|
|
* We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
|
|
* chose to use someone else's previously registered machine ID (3139, MX51_GGC)
|
|
* rather than obtaining a valid ID:-/
|
|
*
|
|
* For the bcm2837, hopefully a machine type is not needed, since everything
|
|
* is DT.
|
|
*/
|
|
#ifdef CONFIG_BCM2835
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
|
|
#endif
|
|
|
|
/* Memory layout */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
|
|
/*
|
|
* The board really has 256M. However, the VC (VideoCore co-processor) shares
|
|
* the RAM, and uses a configurable portion at the top. We tell U-Boot that a
|
|
* smaller amount of RAM is present in order to avoid stomping on the area
|
|
* the VC uses.
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_SIZE SZ_128M
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_SDRAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_MALLOC_LEN SZ_4M
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x00200000
|
|
#define CONFIG_LOADADDR 0x00200000
|
|
|
|
/* Devices */
|
|
/* GPIO */
|
|
#define CONFIG_BCM2835_GPIO
|
|
/* LCD */
|
|
#define CONFIG_LCD_DT_SIMPLEFB
|
|
#define CONFIG_VIDEO_BCM2835
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_TFTP_TSIZE
|
|
#endif
|
|
|
|
/* Console configuration */
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
|
|
/* Environment */
|
|
#define CONFIG_ENV_SIZE SZ_16K
|
|
#define CONFIG_SYS_LOAD_ADDR 0x1000000
|
|
#define CONFIG_PREBOOT "usb start"
|
|
|
|
/* Shell */
|
|
|
|
/* ATAGs support for bootm/bootz */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/* Environment */
|
|
#define ENV_DEVICE_SETTINGS \
|
|
"stdin=serial,usbkbd\0" \
|
|
"stdout=serial,vidconsole\0" \
|
|
"stderr=serial,vidconsole\0"
|
|
|
|
#ifdef CONFIG_ARM64
|
|
#define FDT_HIGH "ffffffffffffffff"
|
|
#define INITRD_HIGH "ffffffffffffffff"
|
|
#else
|
|
#define FDT_HIGH "ffffffff"
|
|
#define INITRD_HIGH "ffffffff"
|
|
#endif
|
|
|
|
/*
|
|
* Memory layout for where various images get loaded by boot scripts:
|
|
*
|
|
* I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
|
|
*
|
|
* Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
|
|
* newer versions place it in high memory. So prevent U-Boot from doing its own
|
|
* DTB + initrd relocation so that we won't accidentally relocate the initrd
|
|
* over the firmware-loaded DTB and generally try to lay out things starting
|
|
* from the bottom of RAM.
|
|
*
|
|
* kernel_addr_r has different constraints on ARM and Aarch64. For 32-bit ARM,
|
|
* it must be within the first 128M of RAM in order for the kernel's
|
|
* CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
|
|
* to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
|
|
* decompressor also likes to relocate itself to right past the end of the
|
|
* decompressed kernel, so in total the sum of the compressed and and
|
|
* decompressed kernel needs to be reserved.
|
|
*
|
|
* For Aarch64, the kernel image is uncompressed and must be loaded at
|
|
* text_offset bytes (specified in the header of the Image) into a 2MB
|
|
* boundary. The 'booti' command relocates the image if necessary. Linux uses
|
|
* a default text_offset of 0x80000. In summary, loading at 0x80000
|
|
* satisfies all these constraints and reserving memory up to 0x02400000
|
|
* permits fairly large (roughly 36M) kernels.
|
|
*
|
|
* scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
|
|
* conflict with something else. Reserving 1M for each of them at
|
|
* 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
|
|
*
|
|
* On ARM, both the DTB and any possible initrd must be loaded such that they
|
|
* fit inside the lowmem mapping in Linux. In practice, this usually means not
|
|
* more than ~700M away from the start of the kernel image but this number can
|
|
* be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
|
|
* parameter given to the kernel. So reserving memory from low to high
|
|
* satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
|
|
* the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
|
|
* Even with the smallest possible CPU-GPU memory split of the CPU getting
|
|
* only 64M, the remaining 25M starting at 0x02700000 should allow quite
|
|
* large initrds before they start colliding with U-Boot.
|
|
*/
|
|
#define ENV_MEM_LAYOUT_SETTINGS \
|
|
"fdt_high=" FDT_HIGH "\0" \
|
|
"initrd_high=" INITRD_HIGH "\0" \
|
|
"kernel_addr_r=0x00080000\0" \
|
|
"scriptaddr=0x02400000\0" \
|
|
"pxefile_addr_r=0x02500000\0" \
|
|
"fdt_addr_r=0x02600000\0" \
|
|
"ramdisk_addr_r=0x02700000\0"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(USB, usb, 0) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
|
|
ENV_DEVICE_SETTINGS \
|
|
ENV_MEM_LAYOUT_SETTINGS \
|
|
BOOTENV
|
|
|
|
|
|
#endif
|
|
|