upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
116 lines
3.2 KiB
116 lines
3.2 KiB
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* ti816x_evm.h
|
|
*
|
|
* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
|
|
* Antoine Tenart, <atenart@adeneo-embedded.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_TI816X_EVM_H
|
|
#define __CONFIG_TI816X_EVM_H
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc rescan;" \
|
|
"fatload mmc 0 ${loadaddr} uImage;" \
|
|
"bootm ${loadaddr}" \
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK >> 1)
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
|
|
/**
|
|
* Platform/Board specific defs
|
|
*/
|
|
#define CONFIG_SYS_CLK_FREQ 27000000
|
|
#define CONFIG_SYS_TIMERBASE 0x4802E000
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK (48000000)
|
|
#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
|
|
|
|
/* allow overwriting serial config and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
/*
|
|
* GPMC NAND block. We support 1 device and the physical address to
|
|
* access CS0 at is 0x8000000.
|
|
*/
|
|
#define CONFIG_SYS_NAND_BASE 0x8000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
/* NAND: SPL related configs */
|
|
|
|
/* NAND: device related configs */
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
/* NAND: driver related configs */
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
|
|
#define CONFIG_ENV_OFFSET 0x001c0000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
|
|
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
|
|
/* SPL */
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_TEXT_BASE 0x40400000
|
|
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
|
|
CONFIG_SPL_TEXT_BASE)
|
|
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
|
|
/* Since SPL did pll and ddr initialization for us,
|
|
* we don't need to do it twice.
|
|
*/
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
/*
|
|
* Disable MMC DM for SPL build and can be re-enabled after adding
|
|
* DM support in SPL
|
|
*/
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_DM_MMC
|
|
#undef CONFIG_TIMER
|
|
#endif
|
|
#endif
|
|
|