upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/post/board/lwmon5/gdc.c

96 lines
2.7 KiB

/*
* (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
*
* Developed for DENX Software Engineering GmbH
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
/* This test attempts to verify board GDC. A scratch register tested, then
* simple memory test (get_ram_size()) run over GDC memory.
*/
#include <post.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define GDC_SCRATCH_REG 0xC1FF8044
#define GDC_VERSION_REG 0xC1FF8084
#define GDC_RAM_START 0xC0000000
#define GDC_RAM_END 0xC2000000
#if CONFIG_POST & CFG_POST_BSPEC4
static int gdc_test_reg_one(uint value)
{
int ret;
uint read_value;
/* write test pattern */
out_be32((void *)GDC_SCRATCH_REG, value);
/* read other location (protect against data lines capacity) */
ret = in_be32((void *)GDC_RAM_START);
/* verify test pattern */
read_value = in_be32((void *)GDC_SCRATCH_REG);
if (read_value != value) {
post_log("GDC SCRATCH test failed write %08X, read %08X\n",
value, read_value);
}
return (read_value != value);
}
/* Verify GDC, get memory size */
int gdc_post_test(int flags)
{
uint old_value;
int ret = 0;
post_log("\n");
old_value = in_be32((void *)GDC_SCRATCH_REG);
/*
* GPIOC2 register behaviour: the LIME graphics processor has a
* maximum of 5 GPIO ports that can be used in this hardware
* configuration. Thus only the bits for these 5 GPIOs can be
* activated in the GPIOC2 register. All other bits will always be
* read as zero.
*/
if (gdc_test_reg_one(0x00150015))
ret = 1;
if (gdc_test_reg_one(0x000A000A))
ret = 1;
out_be32((void *)GDC_SCRATCH_REG, old_value);
old_value = in_be32((void *)GDC_VERSION_REG);
post_log("GDC chip version %u.%u, year %04X\n",
(old_value >> 8) & 0xFF, old_value & 0xFF,
(old_value >> 16) & 0xFFFF);
old_value = get_ram_size((void *)GDC_RAM_START,
GDC_RAM_END - GDC_RAM_START);
post_log("GDC RAM size: %d bytes\n", old_value);
return ret;
}
#endif /* CONFIG_POST & CFG_POST_BSPEC4 */