upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
402 lines
12 KiB
402 lines
12 KiB
/*
|
|
*(C) Copyright 2005-2007 Netstal Maschinen AG
|
|
* Niklaus Giger (Niklaus.Giger@netstal.com)
|
|
*
|
|
* This source code is free software; you can redistribute it
|
|
* and/or modify it in source code form under the terms of the GNU
|
|
* General Public License as published by the Free Software
|
|
* Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm-ppc/u-boot.h>
|
|
#include "../common/nm_bsp.c"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
|
|
|
|
#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
|
|
|
|
#define DO_UGLY_SDRAM_WORKAROUND
|
|
|
|
enum {
|
|
/* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
|
|
HW_GENERATION_HCU2 = 0x10,
|
|
HW_GENERATION_HCU3 = 0x10,
|
|
HW_GENERATION_HCU4 = 0x20,
|
|
HW_GENERATION_MCU = 0x08,
|
|
HW_GENERATION_MCU20 = 0x0a,
|
|
HW_GENERATION_MCU25 = 0x09,
|
|
};
|
|
|
|
void hcu_led_set(u32 value);
|
|
long int spd_sdram(int(read_spd)(uint addr));
|
|
|
|
#ifdef CONFIG_SPD_EEPROM
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#if defined(DEBUG)
|
|
void show_sdram_registers(void);
|
|
#endif
|
|
|
|
/*
|
|
* This function is run very early, out of flash, and before devices are
|
|
* initialized. It is called by lib_ppc/board.c:board_init_f by virtue
|
|
* of being in the init_sequence array.
|
|
*
|
|
* The SDRAM has been initialized already -- start.S:start called
|
|
* init.S:init_sdram early on -- but it is not yet being used for
|
|
* anything, not even stack. So be careful.
|
|
*/
|
|
|
|
#define CPC0_CR0 0xb1 /* Chip control register 0 */
|
|
#define CPC0_CR1 0xb2 /* Chip control register 1 */
|
|
/* Attention: If you want 1 microsecs times from the external oscillator
|
|
* use 0x00804051. But this causes problems with u-boot and linux!
|
|
*/
|
|
#define CPC0_CR1_VALUE 0x00004051
|
|
#define CPC0_ECR 0xaa /* Edge condition register */
|
|
#define EBC0_CFG 0x23 /* External Peripheral Control Register */
|
|
#define CPC0_EIRR 0xb6 /* External Interrupt Register */
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*-------------------------------------------------------------------+
|
|
| Interrupt controller setup for the HCU4 board.
|
|
| Note: IRQ 0-15 405GP internally generated; high; level sensitive
|
|
| IRQ 16 405GP internally generated; low; level sensitive
|
|
| IRQ 17-24 RESERVED/UNUSED
|
|
| IRQ 31 (EXT IRQ 6) (unused)
|
|
+-------------------------------------------------------------------*/
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (uicer, 0x00000000); /* disable all ints */
|
|
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
|
|
mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
|
|
mtdcr (uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
|
|
mtdcr(CPC0_ECR, 0x60606000);
|
|
mtdcr(CPC0_EIRR, 0x7c000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_PRE_INIT
|
|
int board_pre_init (void)
|
|
{
|
|
return board_early_init_f ();
|
|
}
|
|
#endif
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned int j;
|
|
u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
|
|
u16 generation = *boardVersReg & 0xf0;
|
|
u16 index = *boardVersReg & 0x0f;
|
|
|
|
/* Force /RTS to active. The board it not wired quite
|
|
correctly to use cts/rtc flow control, so just force the
|
|
/RST active and forget about it. */
|
|
writeb (readb (0xef600404) | 0x03, 0xef600404);
|
|
printf ("\nNetstal Maschinen AG ");
|
|
if (generation == HW_GENERATION_HCU3)
|
|
printf ("HCU3: index %d\n\n", index);
|
|
else if (generation == HW_GENERATION_HCU4)
|
|
printf ("HCU4: index %d\n\n", index);
|
|
hcu_led_set(0);
|
|
for (j = 0; j < 7; j++) {
|
|
hcu_led_set(1 << j);
|
|
udelay(50 * 1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 hcu_led_get(void)
|
|
{
|
|
return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
* hcu_led_set value to be placed into the LEDs (max 6 bit)
|
|
*---------------------------------------------------------------------------*/
|
|
void hcu_led_set(u32 value)
|
|
{
|
|
u32 tmp = ~value;
|
|
u32 *ledReg;
|
|
|
|
tmp = (tmp << 23) | 0x7FFFFF;
|
|
ledReg = (u32 *)GPIO0_OR;
|
|
*ledReg = tmp;
|
|
}
|
|
|
|
/*
|
|
* sdram_init - Dummy implementation for start.S, spd_sdram or initdram
|
|
* used for HCUx
|
|
*/
|
|
void sdram_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(DEBUG)
|
|
void show_sdram_registers(void)
|
|
{
|
|
u32 value;
|
|
|
|
printf ("SDRAM Controller Registers --\n");
|
|
mfsdram(mem_mcopt1, value);
|
|
printf (" SDRAM0_CFG : 0x%08x\n", value);
|
|
mfsdram(mem_status, value);
|
|
printf (" SDRAM0_STATUS: 0x%08x\n", value);
|
|
mfsdram(mem_mb0cf, value);
|
|
printf (" SDRAM0_B0CR : 0x%08x\n", value);
|
|
mfsdram(mem_mb1cf, value);
|
|
printf (" SDRAM0_B1CR : 0x%08x\n", value);
|
|
mfsdram(mem_sdtr1, value);
|
|
printf (" SDRAM0_TR : 0x%08x\n", value);
|
|
mfsdram(mem_rtr, value);
|
|
printf (" SDRAM0_RTR : 0x%08x\n", value);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* this is even after checkboard. It returns the size of the SDRAM
|
|
* that we have installed. This function is called by board_init_f
|
|
* in lib_ppc/board.c to initialize the memory and return what I
|
|
* found. These are default value, which will be overridden later.
|
|
*/
|
|
|
|
long int fixed_hcu4_sdram (int board_type)
|
|
{
|
|
#ifdef DEBUG
|
|
printf (__FUNCTION__);
|
|
#endif
|
|
/* disable memory controller */
|
|
mtdcr (memcfga, mem_mcopt1);
|
|
mtdcr (memcfgd, 0x00000000);
|
|
|
|
udelay (500);
|
|
|
|
/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
|
|
mtdcr (memcfga, mem_besra);
|
|
mtdcr (memcfgd, 0xffffffff);
|
|
|
|
/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
|
|
mtdcr (memcfga, mem_besrb);
|
|
mtdcr (memcfgd, 0xffffffff);
|
|
|
|
/* Clear SDRAM0_ECCCFG (disable ECC) */
|
|
mtdcr (memcfga, mem_ecccf);
|
|
mtdcr (memcfgd, 0x00000000);
|
|
|
|
/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
|
|
mtdcr (memcfga, mem_eccerr);
|
|
mtdcr (memcfgd, 0xffffffff);
|
|
|
|
/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
|
|
* TODO ngngng
|
|
*/
|
|
mtdcr (memcfga, mem_sdtr1);
|
|
mtdcr (memcfgd, 0x008a4015);
|
|
|
|
/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
|
|
* TODO ngngng
|
|
*/
|
|
mtdcr (memcfga, mem_mb0cf);
|
|
mtdcr (memcfgd, 0x00062001);
|
|
|
|
/* refresh timer = 0x400 */
|
|
mtdcr (memcfga, mem_rtr);
|
|
mtdcr (memcfgd, 0x04000000);
|
|
|
|
/* Power management idle timer set to the default. */
|
|
mtdcr (memcfga, mem_pmit);
|
|
mtdcr (memcfgd, 0x07c00000);
|
|
|
|
udelay (500);
|
|
|
|
/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
|
|
mtdcr (memcfga, mem_mcopt1);
|
|
mtdcr (memcfgd, 0x90800000);
|
|
|
|
#ifdef DEBUG
|
|
printf ("%s: done\n", __FUNCTION__);
|
|
#endif
|
|
return SDRAM_LEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
* hcu_serial_number
|
|
*---------------------------------------------------------------------------*/
|
|
static u32 hcu_serial_number(void)
|
|
{
|
|
u32 *serial = (u32 *)CFG_FLASH_BASE;
|
|
|
|
if (*serial == 0xffffffff)
|
|
return get_ticks();
|
|
|
|
return *serial;
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
* misc_init_r.
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
char *s = getenv("ethaddr");
|
|
char *e;
|
|
int i;
|
|
u32 serial = hcu_serial_number();
|
|
|
|
for (i = 0; i < 6; ++i) {
|
|
gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e + 1 : e;
|
|
}
|
|
|
|
if (gd->bd->bi_enetaddr[3] == 0 &&
|
|
gd->bd->bi_enetaddr[4] == 0 &&
|
|
gd->bd->bi_enetaddr[5] == 0) {
|
|
char ethaddr[22];
|
|
/* [0..3] Must be in sync with CONFIG_ETHADDR */
|
|
gd->bd->bi_enetaddr[0] = 0x00;
|
|
gd->bd->bi_enetaddr[1] = 0x60;
|
|
gd->bd->bi_enetaddr[2] = 0x13;
|
|
gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
|
|
gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
|
|
gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff;
|
|
sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
|
|
gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
|
|
gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
|
|
gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
|
|
printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
|
|
ethaddr, serial);
|
|
setenv ("ethaddr", ethaddr);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DO_UGLY_SDRAM_WORKAROUND
|
|
#include "i2c.h"
|
|
|
|
void set_spd_default_value(unsigned int spd_addr,uchar def_val)
|
|
{
|
|
uchar value;
|
|
int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
|
|
|
|
if (res == 0 && value == 0xff) {
|
|
res = i2c_write(SPD_EEPROM_ADDRESS,
|
|
spd_addr, 1, &def_val, 1) ;
|
|
#ifdef DEBUG
|
|
printf("%s: Setting spd offset %3d to %3d res %d\n",
|
|
__FUNCTION__, spd_addr, def_val, res);
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
long int initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
dram_size = fixed_hcu4_sdram();
|
|
#else
|
|
#ifdef DO_UGLY_SDRAM_WORKAROUND
|
|
/* Workaround if you have no working I2C-EEPROM-SPD-configuration */
|
|
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
|
set_spd_default_value(2, 4); /* SDRAM Type */
|
|
set_spd_default_value(7, 0); /* module width, high byte */
|
|
set_spd_default_value(12, 1); /* Refresh or 0x81 */
|
|
|
|
/* Only correct for HCU3 with 32 MB RAM*/
|
|
/* Number of bytes used by module manufacturer */
|
|
set_spd_default_value( 0, 128);
|
|
set_spd_default_value( 1, 11 ); /* Total SPD memory size */
|
|
set_spd_default_value( 2, 4 ); /* Memory type */
|
|
set_spd_default_value( 3, 12 ); /* Number of row address bits */
|
|
set_spd_default_value( 4, 9 ); /* Number of column address bits */
|
|
set_spd_default_value( 5, 1 ); /* Number of module rows */
|
|
set_spd_default_value( 6, 32 ); /* Module data width, LSB */
|
|
set_spd_default_value( 7, 0 ); /* Module data width, MSB */
|
|
set_spd_default_value( 8, 1 ); /* Module interface signal levels */
|
|
/* SDRAM cycle time for highest CL (Tclk) */
|
|
set_spd_default_value( 9, 112);
|
|
/* SDRAM access time from clock for highest CL (Tac) */
|
|
set_spd_default_value(10, 84 );
|
|
set_spd_default_value(11, 2 ); /* Module configuration type */
|
|
set_spd_default_value(12, 128); /* Refresh rate/type */
|
|
set_spd_default_value(13, 16 ); /* Primary SDRAM width */
|
|
set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */
|
|
/* SDRAM device attributes, min clock delay for back to back */
|
|
/*random column addresses (Tccd) */
|
|
set_spd_default_value(15, 1 );
|
|
/* SDRAM device attributes, burst lengths supported */
|
|
set_spd_default_value(16, 143);
|
|
/* SDRAM device attributes, number of banks on SDRAM device */
|
|
set_spd_default_value(17, 4 );
|
|
/* SDRAM device attributes, CAS latency */
|
|
set_spd_default_value(18, 6 );
|
|
/* SDRAM device attributes, CS latency */
|
|
set_spd_default_value(19, 1 );
|
|
/* SDRAM device attributes, WE latency */
|
|
set_spd_default_value(20, 1 );
|
|
set_spd_default_value(21, 0 ); /* SDRAM module attributes */
|
|
/* SDRAM device attributes, general */
|
|
set_spd_default_value(22, 14 );
|
|
/* SDRAM cycle time for 2nd highest CL (Tclk) */
|
|
set_spd_default_value(23, 117);
|
|
/* SDRAM access time from clock for2nd highest CL (Tac) */
|
|
set_spd_default_value(24, 84 );
|
|
/* SDRAM cycle time for 3rd highest CL (Tclk) */
|
|
set_spd_default_value(25, 0 );
|
|
/* SDRAM access time from clock for3rd highest CL (Tac) */
|
|
set_spd_default_value(26, 0 );
|
|
set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */
|
|
/* Minimum row active to row active delay (Trrd) */
|
|
set_spd_default_value(28, 14 );
|
|
set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */
|
|
set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */
|
|
set_spd_default_value(31, 8 ); /* Module bank density */
|
|
/* Command and Address signal input setup time */
|
|
set_spd_default_value(32, 21 );
|
|
/* Command and Address signal input hold time */
|
|
set_spd_default_value(33, 8 );
|
|
set_spd_default_value(34, 21 ); /* Data signal input setup time */
|
|
set_spd_default_value(35, 8 ); /* Data signal input hold time */
|
|
#endif /* DO_UGLY_SDRAM_WORKAROUND */
|
|
dram_size = spd_sdram(0);
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
show_sdram_registers();
|
|
#endif
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
bcu4_testdram(dram_size);
|
|
printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
|
|
#endif
|
|
|
|
return dram_size;
|
|
}
|
|
|