upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
255 lines
8.1 KiB
255 lines
8.1 KiB
/*
|
|
* (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
|
|
*
|
|
* Copyright (C) 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the MX53-EVK Freescale board.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* SOC type must be included before imx-regs.h */
|
|
#define CONFIG_MX53
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* Enable GPIOs */
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
|
|
|
|
/* MMC */
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* Ethernet on FEC */
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_MII
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x01
|
|
#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
|
|
#define CONFIG_RESET_PHY_R
|
|
#define CONFIG_FEC_MXC_NO_ANEG
|
|
#define CONFIG_ETHPRIME "FEC0"
|
|
|
|
/* SPI */
|
|
#define CONFIG_HARD_SPI
|
|
#define CONFIG_MXC_SPI
|
|
#define CONFIG_DEFAULT_SPI_BUS 1
|
|
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
|
|
|
|
/* SPI FLASH - not used for environment */
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* Command definition */
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_GPIO
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
|
|
#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT "IMA3 MX53 U-Boot > "
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define MTDIDS_DEFAULT "nor0=f0000000.flash"
|
|
|
|
/* FLASH and environment organization */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xF0000000
|
|
#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
|
|
#define CONFIG_FLASH_CFI_MTD /* with MTD support */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
/*
|
|
* Default environment and default scripts
|
|
* to update uboot and load kernel
|
|
*/
|
|
|
|
#define HOSTNAME ima3-mx53
|
|
|
|
#define CONFIG_HOSTNAME ima3-mx53
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram0 rw\0" \
|
|
"addip_sta=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
|
|
"addip=if test -n ${ipdyn};then run addip_dyn;" \
|
|
"else run addip_sta;fi\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"addtty=setenv bootargs ${bootargs}" \
|
|
" console=${console},${baudrate}\0" \
|
|
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
|
|
"console=ttymxc3\0" \
|
|
"loadaddr=70800000\0" \
|
|
"kernel_addr_r=70800000\0" \
|
|
"ramdisk_addr_r=71000000\0" \
|
|
"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
|
|
"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
|
"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
|
|
"mmcargs=setenv bootargs root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"mmcroot=/dev/mmcblk0p3 rw\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs addip addtty addmtd addmisc mmcload;" \
|
|
"bootm\0" \
|
|
"mmcload=fatload mmc ${mmcdev}:${mmcpart} " \
|
|
"${loadaddr} ${uimage}\0" \
|
|
"mmcrootfstype=ext3 rootwait\0" \
|
|
"flash_self=run ramargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"run nfsargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \
|
|
"tftp ${kernel_addr_r} ${bootfile}\0" \
|
|
"net_self=if run net_self_load;then " \
|
|
"run ramargs addip addtty addmtd addmisc;" \
|
|
"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
|
|
"else echo Images not loades;fi\0" \
|
|
"satargs=setenv bootargs root=/dev/sda1\0" \
|
|
"satafile=boot/uImage\0" \
|
|
"ssdboot=echo Booting from ssd ...; " \
|
|
"run satargs addip addtty addmtd addmisc;" \
|
|
"sata init;ext2load sata 0:1 ${kernel_addr_r} " \
|
|
"${satafile};bootm\0" \
|
|
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \
|
|
"uimage=uImage\0" \
|
|
"load=tftp ${loadaddr} ${u-boot}\0" \
|
|
"uboot_addr=0xf0001000\0" \
|
|
"update=protect off 0xf0000000 +60000;" \
|
|
"erase ${uboot_addr} +60000;" \
|
|
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
|
|
"upd=if run load;then echo Updating u-boot;if run update;" \
|
|
"then echo U-Boot updated;" \
|
|
"else echo Error updating u-boot !;" \
|
|
"echo Board without bootloader !!;" \
|
|
"fi;" \
|
|
"else echo U-Boot not downloaded..exiting;fi\0" \
|
|
"bootcmd=run net_nfs\0"
|
|
|
|
|
|
#define CONFIG_CMD_SATA
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_DWC_AHSATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#define CONFIG_LIBATA
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|
|
|