upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
288 lines
6.6 KiB
288 lines
6.6 KiB
/*
|
|
* (C) Copyright 2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/mpc8349_pci.h>
|
|
#include <i2c.h>
|
|
#include <spi.h>
|
|
#include <miiphy.h>
|
|
#include <spd_sdram.h>
|
|
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
|
|
int fixed_sdram(void);
|
|
void sdram_init(void);
|
|
|
|
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
|
|
void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
volatile u8* bcsr = (volatile u8*)CFG_BCSR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[1] &= ~0x01;
|
|
|
|
#ifdef CFG_USE_MPC834XSYS_USB_PHY
|
|
/* Use USB PHY on SYS board */
|
|
bcsr[5] |= 0x02;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CFG_IMMR;
|
|
u32 msize = 0;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
/*
|
|
* Initialize SDRAM if it is on local bus.
|
|
*/
|
|
sdram_init();
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize and enable DDR ECC.
|
|
*/
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CFG_IMMR;
|
|
u32 msize = 0;
|
|
u32 ddr_size;
|
|
u32 ddr_size_log2;
|
|
|
|
msize = CFG_DDR_SIZE;
|
|
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
|
(ddr_size > 1);
|
|
ddr_size = ddr_size>>1, ddr_size_log2++) {
|
|
if (ddr_size & 1) {
|
|
return -1;
|
|
}
|
|
}
|
|
im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
|
|
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
|
|
#if (CFG_DDR_SIZE != 256)
|
|
#warning Currenly any ddr size other than 256 is not supported
|
|
#endif
|
|
#ifdef CONFIG_DDR_II
|
|
im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
|
|
im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
|
|
im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CFG_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CFG_DDR_MODE2;
|
|
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
|
im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
|
|
#else
|
|
im->ddr.csbnds[2].csbnds = 0x0000000f;
|
|
im->ddr.cs_config[2] = CFG_DDR_CONFIG;
|
|
|
|
/* currently we use only one CS, so disable the other banks */
|
|
im->ddr.cs_config[0] = 0;
|
|
im->ddr.cs_config[1] = 0;
|
|
im->ddr.cs_config[3] = 0;
|
|
|
|
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
|
|
im->ddr.sdram_cfg =
|
|
SDRAM_CFG_SREN
|
|
#if defined(CONFIG_DDR_2T_TIMING)
|
|
| SDRAM_CFG_2T_EN
|
|
#endif
|
|
| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
|
|
#if defined (CONFIG_DDR_32BIT)
|
|
/* for 32-bit mode burst length is 8 */
|
|
im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
|
|
#endif
|
|
im->ddr.sdram_mode = CFG_DDR_MODE;
|
|
|
|
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
|
#endif
|
|
udelay(200);
|
|
|
|
/* enable DDR controller */
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
return msize;
|
|
}
|
|
#endif/*!CFG_SPD_EEPROM*/
|
|
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts("Board: Freescale MPC8349EMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if MPC8349EMDS is soldered with SDRAM
|
|
*/
|
|
#if defined(CFG_BR2_PRELIM) \
|
|
&& defined(CFG_OR2_PRELIM) \
|
|
&& defined(CFG_LBLAWBAR2_PRELIM) \
|
|
&& defined(CFG_LBLAWAR2_PRELIM)
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
void sdram_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile lbus83xx_t *lbc= &immap->lbus;
|
|
uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
|
|
|
|
/*
|
|
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
|
|
*/
|
|
|
|
/* setup mtrpt, lsrt and lbcr for LB bus */
|
|
lbc->lbcr = CFG_LBC_LBCR;
|
|
lbc->mrtpr = CFG_LBC_MRTPR;
|
|
lbc->lsrt = CFG_LBC_LSRT;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller Machine Mode Register.
|
|
*/
|
|
lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
|
|
asm("sync");
|
|
/*1 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*2 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*3 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*4 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*5 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*6 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*7 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
/*8 times*/
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/* 0x58636733; mode register write operation */
|
|
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
}
|
|
#else
|
|
void sdram_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The following are used to control the SPI chip selects for the SPI command.
|
|
*/
|
|
#ifdef CONFIG_MPC8XXX_SPI
|
|
|
|
#define SPI_CS_MASK 0x80000000
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs == 0;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
|
|
|
|
iopd->dat &= ~SPI_CS_MASK;
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
|
|
|
|
iopd->dat |= SPI_CS_MASK;
|
|
}
|
|
#endif /* CONFIG_HARD_SPI */
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|