upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
298 lines
8.1 KiB
298 lines
8.1 KiB
/*
|
|
* board.c
|
|
*
|
|
* Board functions for B&R BRXRE1 Board
|
|
*
|
|
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at>
|
|
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <power/tps65217.h>
|
|
#include "../common/bur_common.h"
|
|
#include <lcd.h>
|
|
|
|
/* -------------------------------------------------------------------------*/
|
|
/* -- defines for used GPIO Hardware -- */
|
|
#define ESC_KEY (0+19)
|
|
#define LCD_PWR (0+5)
|
|
#define PUSH_KEY (0+31)
|
|
/* -------------------------------------------------------------------------*/
|
|
/* -- PSOC Resetcontroller Register defines -- */
|
|
|
|
/* I2C Address of controller */
|
|
#define RSTCTRL_ADDR 0x75
|
|
/* Register for CTRL-word */
|
|
#define RSTCTRL_CTRLREG 0x01
|
|
/* Register for giving some information to VxWorks OS */
|
|
#define RSTCTRL_SCRATCHREG 0x04
|
|
|
|
/* -- defines for RSTCTRL_CTRLREG -- */
|
|
#define RSTCTRL_FORCE_PWR_NEN 0x0404
|
|
#define RSTCTRL_CAN_STB 0x4040
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/* TODO: check ram-timing ! */
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
|
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
|
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
|
|
};
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
};
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
|
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
|
|
};
|
|
|
|
static const struct ctrl_ioregs ddr3_ioregs = {
|
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
};
|
|
|
|
#define OSC (V_OSCK/1000000)
|
|
const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
unsigned int oldspeed;
|
|
unsigned short buf;
|
|
|
|
struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
|
|
struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
|
|
/*
|
|
* enable additional clocks of modules which are accessed later from
|
|
* VxWorks OS
|
|
*/
|
|
u32 *const clk_domains[] = { 0 };
|
|
|
|
u32 *const clk_modules_xre1specific[] = {
|
|
&cmwkup->wkup_adctscctrl,
|
|
&cmper->spi1clkctrl,
|
|
&cmper->dcan0clkctrl,
|
|
&cmper->dcan1clkctrl,
|
|
&cmper->epwmss0clkctrl,
|
|
&cmper->epwmss1clkctrl,
|
|
&cmper->epwmss2clkctrl,
|
|
&cmper->lcdclkctrl,
|
|
&cmper->lcdcclkstctrl,
|
|
0
|
|
};
|
|
do_enable_clocks(clk_domains, clk_modules_xre1specific, 1);
|
|
/* setup LCD-Pixel Clock */
|
|
writel(0x2, CM_DPLL + 0x34);
|
|
/* power-OFF LCD-Display */
|
|
gpio_direction_output(LCD_PWR, 0);
|
|
|
|
/* setup I2C */
|
|
enable_i2c_pin_mux();
|
|
i2c_set_bus_num(0);
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
|
|
/* power-ON 3V3 via Resetcontroller */
|
|
oldspeed = i2c_get_bus_speed();
|
|
if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
|
|
buf = RSTCTRL_FORCE_PWR_NEN | RSTCTRL_CAN_STB;
|
|
i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1,
|
|
(uint8_t *)&buf, sizeof(buf));
|
|
i2c_set_bus_speed(oldspeed);
|
|
} else {
|
|
puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n");
|
|
}
|
|
|
|
pmicsetup(0);
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr3;
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(400, &ddr3_ioregs,
|
|
&ddr3_data,
|
|
&ddr3_cmd_ctrl_data,
|
|
&ddr3_emif_reg_data, 0);
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
/*
|
|
* Basic board specific setup. Pinmux has been handled already.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init();
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
const unsigned int toff = 1000;
|
|
unsigned int cnt = 3;
|
|
unsigned short buf = 0xAAAA;
|
|
unsigned char scratchreg = 0;
|
|
unsigned int oldspeed;
|
|
|
|
/* try to read out some boot-instruction from resetcontroller */
|
|
oldspeed = i2c_get_bus_speed();
|
|
if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
|
|
i2c_read(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1,
|
|
&scratchreg, sizeof(scratchreg));
|
|
i2c_set_bus_speed(oldspeed);
|
|
} else {
|
|
puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n");
|
|
}
|
|
|
|
if (gpio_get_value(ESC_KEY)) {
|
|
do {
|
|
lcd_position_cursor(1, 8);
|
|
switch (cnt) {
|
|
case 3:
|
|
lcd_puts(
|
|
"release ESC-KEY to enter SERVICE-mode.");
|
|
break;
|
|
case 2:
|
|
lcd_puts(
|
|
"release ESC-KEY to enter DIAGNOSE-mode.");
|
|
break;
|
|
case 1:
|
|
lcd_puts(
|
|
"release ESC-KEY to enter BOOT-mode. ");
|
|
break;
|
|
}
|
|
mdelay(toff);
|
|
cnt--;
|
|
if (!gpio_get_value(ESC_KEY) &&
|
|
gpio_get_value(PUSH_KEY) && 2 == cnt) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"switching to network-console ... ");
|
|
setenv("bootcmd", "run netconsole");
|
|
cnt = 4;
|
|
break;
|
|
} else if (!gpio_get_value(ESC_KEY) &&
|
|
gpio_get_value(PUSH_KEY) && 1 == cnt) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"starting u-boot script from USB ... ");
|
|
setenv("bootcmd", "run usbscript");
|
|
cnt = 4;
|
|
break;
|
|
} else if ((!gpio_get_value(ESC_KEY) &&
|
|
gpio_get_value(PUSH_KEY) && cnt == 0) ||
|
|
(gpio_get_value(ESC_KEY) &&
|
|
gpio_get_value(PUSH_KEY) && cnt == 0)) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"starting script from network ... ");
|
|
setenv("bootcmd", "run netscript");
|
|
cnt = 4;
|
|
break;
|
|
} else if (!gpio_get_value(ESC_KEY)) {
|
|
break;
|
|
}
|
|
} while (cnt);
|
|
} else if (scratchreg == 0xCC) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"starting vxworks from network ... ");
|
|
setenv("bootcmd", "run netboot");
|
|
cnt = 4;
|
|
} else if (scratchreg == 0xCD) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"starting script from network ... ");
|
|
setenv("bootcmd", "run netscript");
|
|
cnt = 4;
|
|
} else if (scratchreg == 0xCE) {
|
|
lcd_position_cursor(1, 8);
|
|
lcd_puts(
|
|
"starting AR from eMMC ... ");
|
|
setenv("bootcmd", "run mmcboot");
|
|
cnt = 4;
|
|
}
|
|
|
|
lcd_position_cursor(1, 8);
|
|
switch (cnt) {
|
|
case 0:
|
|
lcd_puts("entering BOOT-mode. ");
|
|
setenv("bootcmd", "run defaultAR");
|
|
buf = 0x0000;
|
|
break;
|
|
case 1:
|
|
lcd_puts("entering DIAGNOSE-mode. ");
|
|
buf = 0x0F0F;
|
|
break;
|
|
case 2:
|
|
lcd_puts("entering SERVICE mode. ");
|
|
buf = 0xB4B4;
|
|
break;
|
|
case 3:
|
|
lcd_puts("loading OS... ");
|
|
buf = 0x0404;
|
|
break;
|
|
}
|
|
/* write bootinfo into scratchregister of resetcontroller */
|
|
oldspeed = i2c_get_bus_speed();
|
|
if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) {
|
|
i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1,
|
|
(uint8_t *)&buf, sizeof(buf));
|
|
i2c_set_bus_speed(oldspeed);
|
|
} else {
|
|
puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n");
|
|
}
|
|
/* setup othbootargs for bootvx-command (vxWorks bootline) */
|
|
char othbootargs[128];
|
|
snprintf(othbootargs, sizeof(othbootargs),
|
|
"u=vxWorksFTP pw=vxWorks o=0x%08x;0x%08x;0x%08x;0x%08x",
|
|
(unsigned int) gd->fb_base-0x20,
|
|
(u32)getenv_ulong("vx_memtop", 16, gd->fb_base-0x20),
|
|
(u32)getenv_ulong("vx_romfsbase", 16, 0),
|
|
(u32)getenv_ulong("vx_romfssize", 16, 0));
|
|
setenv("othbootargs", othbootargs);
|
|
/*
|
|
* reset VBAR registers to its reset location, VxWorks 6.9.3.2 does
|
|
* expect that vectors are there, original u-boot moves them to _start
|
|
*/
|
|
__asm__("ldr r0,=0x20000");
|
|
__asm__("mcr p15, 0, r0, c12, c0, 0"); /* Set VBAR */
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|
|
|