upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
128 lines
3.1 KiB
128 lines
3.1 KiB
/*
|
|
* (C) Copyright 2004, Freescale, Inc
|
|
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Minimal serial functions needed to use one of the PSC ports
|
|
* as serial console interface.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8220.h>
|
|
|
|
#define PSC_BASE MMAP_PSC1
|
|
|
|
#if defined(CONFIG_PSC_CONSOLE)
|
|
int psc_serial_init (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
|
|
u32 counter;
|
|
|
|
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
|
|
psc->cr = 0;
|
|
psc->ipcr_acr = 0;
|
|
psc->isr_imr = 0;
|
|
|
|
/* write to CSR: RX/TX baud rate from timers */
|
|
psc->sr_csr = 0xdd000000;
|
|
|
|
psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR1_RX_RTS;
|
|
psc->mr1_2 = PSC_MR2_STOP_BITS_1 | PSC_MR2_TX_CTS;
|
|
|
|
/* Setting up BaudRate */
|
|
counter = ((gd->bus_clk / gd->baudrate)) >> 5;
|
|
counter++;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
psc->ctur = ((counter & 0xff00) << 16);
|
|
/* write to CTLR: divide counter lower byte */
|
|
psc->ctlr = ((counter & 0x00ff) << 24);
|
|
|
|
psc->cr = PSC_CR_RST_RX_CMD;
|
|
psc->cr = PSC_CR_RST_TX_CMD;
|
|
psc->cr = PSC_CR_RST_ERR_STS_CMD;
|
|
psc->cr = PSC_CR_RST_BRK_INT_CMD;
|
|
psc->cr = PSC_CR_RST_MR_PTR_CMD;
|
|
|
|
psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
|
|
return (0);
|
|
}
|
|
|
|
void psc_serial_putc (const char c)
|
|
{
|
|
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
|
|
|
|
if (c == '\n')
|
|
serial_putc ('\r');
|
|
|
|
/* Wait for last character to go. */
|
|
while (!(psc->sr_csr & PSC_SR_TXEMT));
|
|
|
|
psc->xmitbuf[0] = c;
|
|
}
|
|
|
|
void psc_serial_puts (const char *s)
|
|
{
|
|
while (*s) {
|
|
serial_putc (*s++);
|
|
}
|
|
}
|
|
|
|
int psc_serial_getc (void)
|
|
{
|
|
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
|
|
|
|
/* Wait for a character to arrive. */
|
|
while (!(psc->sr_csr & PSC_SR_RXRDY));
|
|
return psc->xmitbuf[2];
|
|
}
|
|
|
|
int psc_serial_tstc (void)
|
|
{
|
|
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
|
|
|
|
return (psc->sr_csr & PSC_SR_RXRDY);
|
|
}
|
|
|
|
void psc_serial_setbrg (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
|
|
u32 counter;
|
|
|
|
counter = ((gd->bus_clk / gd->baudrate)) >> 5;
|
|
counter++;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
psc->ctur = ((counter & 0xff00) << 16);
|
|
/* write to CTLR: divide counter lower byte */
|
|
psc->ctlr = ((counter & 0x00ff) << 24);
|
|
|
|
psc->cr = PSC_CR_RST_RX_CMD;
|
|
psc->cr = PSC_CR_RST_TX_CMD;
|
|
|
|
psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
|
|
}
|
|
#endif /* CONFIG_PSC_CONSOLE */
|
|
|