upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/at32ap/hsdramc.c

140 lines
3.7 KiB

/*
* Copyright (C) 2005-2006 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#ifdef CFG_HSDRAMC
#include <asm/io.h>
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/memory-map.h>
#include "hsdramc1.h"
unsigned long sdram_init(const struct sdram_info *info)
{
unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
unsigned long sdram_size;
unsigned long tmp;
unsigned long bus_hz;
unsigned int i;
tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
| HSDRAMC1_BF(NR, info->row_bits - 11)
| HSDRAMC1_BF(NB, info->bank_bits - 1)
| HSDRAMC1_BF(CAS, info->cas)
| HSDRAMC1_BF(TWR, info->twr)
| HSDRAMC1_BF(TRC, info->trc)
| HSDRAMC1_BF(TRP, info->trp)
| HSDRAMC1_BF(TRCD, info->trcd)
| HSDRAMC1_BF(TRAS, info->tras)
| HSDRAMC1_BF(TXSR, info->txsr));
#ifdef CFG_SDRAM_16BIT
tmp |= HSDRAMC1_BIT(DBW);
sdram_size = 1 << (info->row_bits + info->col_bits
+ info->bank_bits + 1);
#else
sdram_size = 1 << (info->row_bits + info->col_bits
+ info->bank_bits + 2);
#endif
hsdramc1_writel(CR, tmp);
/*
* Initialization sequence for SDRAM, from the data sheet:
*
* 1. A minimum pause of 200 us is provided to precede any
* signal toggle.
*/
udelay(200);
/*
* 2. A Precharge All command is issued to the SDRAM
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
hsdramc1_readl(MR);
writel(0, sdram);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
writel(0, sdram);
/*
* 4. A mode register set (MRS) cycle is issued to program
* SDRAM parameters, in particular CAS latency and burst
* length.
*
* CAS from info struct, burst length 1, serial burst type
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
hsdramc1_readl(MR);
writel(0, sdram + (info->cas << 4));
/*
* 5. A Normal Mode command is provided, 3 clocks after tMRD
* is met.
*
* From the timing diagram, it looks like tMRD is 3
* cycles...try a dummy read from the peripheral bus.
*/
hsdramc1_readl(MR);
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
hsdramc1_readl(MR);
writel(0, sdram);
/*
* 6. Write refresh rate into SDRAMC refresh timer count
* register (refresh rate = timing between refresh cycles).
*
* 15.6 us is a typical value for a burst of length one
*/
bus_hz = get_sdram_clk_rate();
hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000);
printf("SDRAM: %u MB at address 0x%08lx\n",
sdram_size >> 20, info->phys_addr);
printf("Testing SDRAM...");
for (i = 0; i < sdram_size / 4; i++)
sdram[i] = i;
for (i = 0; i < sdram_size / 4; i++) {
tmp = sdram[i];
if (tmp != i) {
printf("FAILED at address 0x%08lx\n",
info->phys_addr + i * 4);
printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
return 0;
}
}
puts("OK\n");
return sdram_size;
}
#endif /* CFG_HSDRAMC */