upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/s3c4510b_eth.c

241 lines
7.2 KiB

/***********************************************************************
*
* Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
* Curt Brune <curt@cucy.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Description: Ethernet interface for Samsung S3C4510B SoC
*/
#include <common.h>
#include <command.h>
#include <net.h>
#include <asm/hardware.h>
#include "s3c4510b_eth.h"
static TX_FrameDescriptor txFDbase[ETH_MaxTxFrames];
static MACFrame txFrameBase[ETH_MaxTxFrames];
static RX_FrameDescriptor rxFDbase[PKTBUFSRX];
static ETH m_eth;
static s32 TxFDinit( ETH *eth) {
s32 i;
MACFrame *txFrmBase;
/* disable cache for access to the TX buffers */
txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK);
/* store start of Tx descriptors and set current */
eth->m_curTX_FD = (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK);
eth->m_baseTX_FD = eth->m_curTX_FD;
for ( i = 0; i < ETH_MaxTxFrames; i++) {
eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner = 0x0; /* CPU owner */
eth->m_baseTX_FD[i].m_opt.ui = 0x0;
eth->m_baseTX_FD[i].m_status.ui = 0x0;
eth->m_baseTX_FD[i].m_nextFD = &eth->m_baseTX_FD[i+1];
}
/* make the list circular */
eth->m_baseTX_FD[i-1].m_nextFD = &eth->m_baseTX_FD[0];
PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);
return 0;
}
static s32 RxFDinit( ETH *eth) {
s32 i;
/* MACFrame *rxFrmBase; */
/* disable cache for access to the RX buffers */
/* rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */
/* store start of Rx descriptors and set current */
eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK);
eth->m_baseRX_FD = eth->m_curRX_FD;
for ( i = 0; i < PKTBUFSRX; i++) {
eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK;
eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner = 0x1; /* BDMA owner */
eth->m_baseRX_FD[i].m_reserved = 0x0;
eth->m_baseRX_FD[i].m_status.ui = 0x0;
eth->m_baseRX_FD[i].m_nextFD = &eth->m_baseRX_FD[i+1];
}
/* make the list circular */
eth->m_baseRX_FD[i-1].m_nextFD = &eth->m_baseRX_FD[0];
PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);
return 0;
}
/*
* Public u-boot interface functions below
*/
int eth_init(bd_t *bis)
{
ETH *eth = &m_eth;
/* store our MAC address */
eth_getenv_enetaddr("ethaddr", eth->m_mac);
/* setup DBMA and MAC */
PUT_REG( REG_BDMARXCON, ETH_BRxRS); /* reset BDMA RX machine */
PUT_REG( REG_BDMATXCON, ETH_BTxRS); /* reset BDMA TX machine */
PUT_REG( REG_MACCON , ETH_SwReset); /* reset MAC machine */
PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
PUT_REG( REG_MACCON , 0); /* reset MAC machine */
/* init frame descriptors */
TxFDinit( eth);
RxFDinit( eth);
/* init the CAM with our MAC address */
PUT_REG( REG_CAM_BASE, (eth->m_mac[0] << 24) |
(eth->m_mac[1] << 16) |
(eth->m_mac[2] << 8) |
(eth->m_mac[3]));
PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) |
(eth->m_mac[5] << 16));
/* enable CAM address 1 -- the MAC we just loaded */
PUT_REG( REG_CAMEN, 0x1);
PUT_REG( REG_CAMCON,
ETH_BroadAcc | /* accept broadcast packetes */
ETH_CompEn); /* enable compare mode (check against the CAM) */
/* configure the BDMA Transmitter control */
PUT_REG( REG_BDMATXCON,
ETH_BTxBRST | /* BDMA Tx burst size 16 words */
ETH_BTxMSL110 | /* BDMA Tx wait to fill 6/8 of the BDMA */
ETH_BTxSTSKO | /* BDMA Tx interrupt(Stop) on non-owner TX FD */
ETH_BTxEn); /* BDMA Tx Enable */
/* configure the MAC Transmitter control */
PUT_REG( REG_MACTXCON,
ETH_EnComp | /* interrupt when the MAC transmits or discards packet */
ETH_TxEn); /* MAC transmit enable */
/* configure the BDMA Receiver control */
PUT_REG( REG_BDMARXCON,
ETH_BRxBRST | /* BDMA Rx Burst Size 16 words */
ETH_BRxSTSKO | /* BDMA Rx interrupt(Stop) on non-owner RX FD */
ETH_BRxMAINC | /* BDMA Rx Memory Address increment */
ETH_BRxDIE | /* BDMA Rx Every Received Frame Interrupt Enable */
ETH_BRxNLIE | /* BDMA Rx NULL List Interrupt Enable */
ETH_BRxNOIE | /* BDMA Rx Not Owner Interrupt Enable */
ETH_BRxLittle | /* BDMA Rx Little endian */
ETH_BRxEn); /* BDMA Rx Enable */
/* configure the MAC Receiver control */
PUT_REG( REG_MACRXCON,
ETH_RxEn); /* MAC ETH_RxEn */
return 0;
}
/* Send a packet */
s32 eth_send(volatile void *packet, s32 length)
{
u32 i;
ETH *eth = &m_eth;
if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
printf("eth_send(): TX Frame. CPU not owner.\n");
return -1;
}
/* copy user data into frame data pointer */
memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
(void *)packet,
length);
/* Set TX Frame flags */
eth->m_curTX_FD->m_opt.bf.widgetAlign = 0;
eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
eth->m_curTX_FD->m_opt.bf.no_crc = 0;
eth->m_curTX_FD->m_opt.bf.no_padding = 0;
/* Set TX Frame length */
eth->m_curTX_FD->m_status.bf.len = length;
/* Change ownership to BDMA */
eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;
/* Enable MAC and BDMA Tx control register */
SET_REG( REG_BDMATXCON, ETH_BTxEn);
SET_REG( REG_MACTXCON, ETH_TxEn);
/* poll on TX completion status */
while ( !eth->m_curTX_FD->m_status.bf.complete) {
/* sleep */
for ( i = 0; i < 0x10000; i ++);
}
/* Change the Tx frame descriptor for next use */
eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;
return 0;
}
/* Check for received packets */
s32 eth_rx (void)
{
s32 nLen = 0;
ETH *eth = &m_eth;
/* check if packet ready */
if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
/* process all waiting packets */
while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
nLen = eth->m_curRX_FD->m_status.bf.len;
/* call back u-boot -- may call eth_send() */
NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
/* set owner back to CPU */
eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
/* clear status */
eth->m_curRX_FD->m_status.ui = 0x0;
/* advance to next descriptor */
eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
/* clear received frame bit */
PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
}
}
return nLen;
}
/* Halt ethernet engine */
void eth_halt(void)
{
/* disable MAC */
PUT_REG( REG_MACCON, ETH_HaltReg);
}