upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/pci/pci_mvebu.c

423 lines
11 KiB

/*
* PCIe driver for Marvell MVEBU SoCs
*
* Based on Barebox drivers/pci/pci-mvebu.c
*
* Ported to U-Boot by:
* Anton Schubert <anton.schubert@gmx.de>
* Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <pci.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <linux/mbus.h>
DECLARE_GLOBAL_DATA_PTR;
/* PCIe unit register offsets */
#define SELECT(x, n) ((x >> n) & 1UL)
#define PCIE_DEV_ID_OFF 0x0000
#define PCIE_CMD_OFF 0x0004
#define PCIE_DEV_REV_OFF 0x0008
#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
#define PCIE_CAPAB_OFF 0x0060
#define PCIE_CTRL_STAT_OFF 0x0068
#define PCIE_HEADER_LOG_4_OFF 0x0128
#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
#define PCIE_WIN5_CTRL_OFF 0x1880
#define PCIE_WIN5_BASE_OFF 0x1884
#define PCIE_WIN5_REMAP_OFF 0x188c
#define PCIE_CONF_ADDR_OFF 0x18f8
#define PCIE_CONF_ADDR_EN BIT(31)
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
#define PCIE_CONF_ADDR(dev, reg) \
(PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \
PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
PCIE_CONF_ADDR_EN)
#define PCIE_CONF_DATA_OFF 0x18fc
#define PCIE_MASK_OFF 0x1910
#define PCIE_MASK_ENABLE_INTS (0xf << 24)
#define PCIE_CTRL_OFF 0x1a00
#define PCIE_CTRL_X1_MODE BIT(0)
#define PCIE_STAT_OFF 0x1a04
#define PCIE_STAT_BUS (0xff << 8)
#define PCIE_STAT_DEV (0x1f << 16)
#define PCIE_STAT_LINK_DOWN BIT(0)
#define PCIE_DEBUG_CTRL 0x1a60
#define PCIE_DEBUG_SOFT_RESET BIT(20)
struct resource {
u32 start;
u32 end;
};
struct mvebu_pcie {
struct pci_controller hose;
char *name;
void __iomem *base;
void __iomem *membase;
struct resource mem;
void __iomem *iobase;
u32 port;
u32 lane;
u32 lane_mask;
pci_dev_t dev;
};
#define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci)
/*
* MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
* into SoCs address space. Each controller will map 32M of MEM
* and 64K of I/O space when registered.
*/
static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
#define PCIE_MEM_SIZE (32 << 20)
#if defined(CONFIG_ARMADA_38X)
#define PCIE_BASE(if) \
((if) == 0 ? \
MVEBU_REG_PCIE_BASE + 0x40000 : \
MVEBU_REG_PCIE_BASE + 0x4000 * (if))
/*
* On A38x MV6820 these PEX ports are supported:
* 0 - Port 0.0
* 1 - Port 0.1
* 2 - Port 0.2
*/
#define MAX_PEX 3
static struct mvebu_pcie pcie_bus[MAX_PEX];
static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
int *mem_target, int *mem_attr)
{
u8 port[] = { 0, 1, 2 };
u8 lane[] = { 0, 0, 0 };
u8 target[] = { 8, 4, 4 };
u8 attr[] = { 0xe8, 0xe8, 0xd8 };
pcie->port = port[pex_idx];
pcie->lane = lane[pex_idx];
*mem_target = target[pex_idx];
*mem_attr = attr[pex_idx];
}
#else
#define PCIE_BASE(if) \
((if) < 8 ? \
(MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \
(MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000))
/*
* On AXP MV78460 these PEX ports are supported:
* 0 - Port 0.0
* 1 - Port 0.1
* 2 - Port 0.2
* 3 - Port 0.3
* 4 - Port 1.0
* 5 - Port 1.1
* 6 - Port 1.2
* 7 - Port 1.3
* 8 - Port 2.0
* 9 - Port 3.0
*/
#define MAX_PEX 10
static struct mvebu_pcie pcie_bus[MAX_PEX];
static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
int *mem_target, int *mem_attr)
{
u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 };
u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 };
u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 };
u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78,
0xe8, 0xd8, 0xb8, 0x78,
0xf8, 0xf8 };
pcie->port = port[pex_idx];
pcie->lane = lane[pex_idx];
*mem_target = target[pex_idx];
*mem_attr = attr[pex_idx];
}
#endif
static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
{
u32 val;
val = readl(pcie->base + PCIE_STAT_OFF);
return !(val & PCIE_STAT_LINK_DOWN);
}
static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
{
u32 stat;
stat = readl(pcie->base + PCIE_STAT_OFF);
stat &= ~PCIE_STAT_BUS;
stat |= busno << 8;
writel(stat, pcie->base + PCIE_STAT_OFF);
}
static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
{
u32 stat;
stat = readl(pcie->base + PCIE_STAT_OFF);
stat &= ~PCIE_STAT_DEV;
stat |= devno << 16;
writel(stat, pcie->base + PCIE_STAT_OFF);
}
static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
{
u32 stat;
stat = readl(pcie->base + PCIE_STAT_OFF);
return (stat & PCIE_STAT_BUS) >> 8;
}
static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
{
u32 stat;
stat = readl(pcie->base + PCIE_STAT_OFF);
return (stat & PCIE_STAT_DEV) >> 16;
}
static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
{
return container_of(hose, struct mvebu_pcie, hose);
}
static int mvebu_pcie_read_config_dword(struct pci_controller *hose,
pci_dev_t dev, int offset, u32 *val)
{
struct mvebu_pcie *pcie = hose_to_pcie(hose);
int local_bus = PCI_BUS(pcie->dev);
int local_dev = PCI_DEV(pcie->dev);
u32 reg;
/* Only allow one other device besides the local one on the local bus */
if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
if (local_dev == 0 && PCI_DEV(dev) != 1) {
/*
* If local dev is 0, the first other dev can
* only be 1
*/
*val = 0xffffffff;
return 1;
} else if (local_dev != 0 && PCI_DEV(dev) != 0) {
/*
* If local dev is not 0, the first other dev can
* only be 0
*/
*val = 0xffffffff;
return 1;
}
}
/* write address */
reg = PCIE_CONF_ADDR(dev, offset);
writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
*val = readl(pcie->base + PCIE_CONF_DATA_OFF);
return 0;
}
static int mvebu_pcie_write_config_dword(struct pci_controller *hose,
pci_dev_t dev, int offset, u32 val)
{
struct mvebu_pcie *pcie = hose_to_pcie(hose);
int local_bus = PCI_BUS(pcie->dev);
int local_dev = PCI_DEV(pcie->dev);
/* Only allow one other device besides the local one on the local bus */
if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
if (local_dev == 0 && PCI_DEV(dev) != 1) {
/*
* If local dev is 0, the first other dev can
* only be 1
*/
return 1;
} else if (local_dev != 0 && PCI_DEV(dev) != 0) {
/*
* If local dev is not 0, the first other dev can
* only be 0
*/
return 1;
}
}
writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF);
writel(val, pcie->base + PCIE_CONF_DATA_OFF);
return 0;
}
/*
* Setup PCIE BARs and Address Decode Wins:
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
{
const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
u32 size;
int i;
/* First, disable and clear BARs and windows. */
for (i = 1; i < 3; i++) {
writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
}
for (i = 0; i < 5; i++) {
writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
}
writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
/* Setup windows for DDR banks. Count total DDR size on the fly. */
size = 0;
for (i = 0; i < dram->num_cs; i++) {
const struct mbus_dram_window *cs = dram->cs + i;
writel(cs->base & 0xffff0000,
pcie->base + PCIE_WIN04_BASE_OFF(i));
writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
pcie->base + PCIE_WIN04_CTRL_OFF(i));
size += cs->size;
}
/* Round up 'size' to the nearest power of two. */
if ((size & (size - 1)) != 0)
size = 1 << fls(size);
/* Setup BAR[1] to all DRAM banks. */
writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
writel(((size - 1) & 0xffff0000) | 0x1,
pcie->base + PCIE_BAR_CTRL_OFF(1));
}
void pci_init_board(void)
{
int mem_target, mem_attr, i;
int bus = 0;
u32 reg;
u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4);
/* Check SoC Control Power State */
debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n",
__func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1),
SELECT(soc_ctrl, 2));
for (i = 0; i < MAX_PEX; i++) {
struct mvebu_pcie *pcie = &pcie_bus[i];
struct pci_controller *hose = &pcie->hose;
/* Get port number, lane number and memory target / attr */
mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
/* Don't read at all from pci registers if port power is down */
if (pcie->lane == 0 && SELECT(soc_ctrl, pcie->port) == 0) {
i += 3;
debug("%s: skipping port %d\n", __func__, pcie->port);
continue;
}
pcie->base = (void __iomem *)PCIE_BASE(i);
/* Check link and skip ports that have no link */
if (!mvebu_pcie_link_up(pcie)) {
debug("%s: PCIe %d.%d - down\n", __func__,
pcie->port, pcie->lane);
continue;
}
debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
pcie->port, pcie->lane, (u32)pcie->base);
/* Read Id info and local bus/dev */
debug("direct conf read %08x, local bus %d, local dev %d\n",
readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
mvebu_pcie_get_local_dev_nr(pcie));
mvebu_pcie_set_local_bus_nr(pcie, bus);
mvebu_pcie_set_local_dev_nr(pcie, 0);
pcie->dev = PCI_BDF(bus, 0, 0);
pcie->mem.start = (u32)mvebu_pcie_membase;
pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
mvebu_pcie_membase += PCIE_MEM_SIZE;
if (mvebu_mbus_add_window_by_id(mem_target, mem_attr,
(phys_addr_t)pcie->mem.start,
PCIE_MEM_SIZE)) {
printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
(u32)pcie->mem.start, PCIE_MEM_SIZE);
}
/* Setup windows and configure host bridge */
mvebu_pcie_setup_wins(pcie);
/* Master + slave enable. */
reg = readl(pcie->base + PCIE_CMD_OFF);
reg |= PCI_COMMAND_MEMORY;
reg |= PCI_COMMAND_MASTER;
reg |= BIT(10); /* disable interrupts */
writel(reg, pcie->base + PCIE_CMD_OFF);
/* Setup U-Boot PCI Controller */
hose->first_busno = 0;
hose->current_busno = bus;
/* PCI memory space */
pci_set_region(hose->regions + 0, pcie->mem.start,
pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
0, 0,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
hose->region_count = 2;
pci_set_ops(hose,
pci_hose_read_config_byte_via_dword,
pci_hose_read_config_word_via_dword,
mvebu_pcie_read_config_dword,
pci_hose_write_config_byte_via_dword,
pci_hose_write_config_word_via_dword,
mvebu_pcie_write_config_dword);
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
/* Set BAR0 to internal registers */
writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
bus = hose->last_busno + 1;
}
}