upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
145 lines
4.1 KiB
145 lines
4.1 KiB
/*
|
|
* Voltage Controller implementation for OMAP
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Nishanth Menon
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
/* Register defines and masks for VC IP Block */
|
|
/* PRM_VC_CFG_I2C_MODE */
|
|
#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6)
|
|
#define PRM_VC_CFG_I2C_MODE_SRMODEEN_BIT (0x1 << 4)
|
|
#define PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT (0x1 << 3)
|
|
#define PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT 0x0
|
|
#define PRM_VC_CFG_I2C_MODE_HSMCODE_MASK 0x3
|
|
|
|
/* PRM_VC_CFG_I2C_CLK */
|
|
#define PRM_VC_CFG_I2C_CLK_HSCLL_SHIFT 24
|
|
#define PRM_VC_CFG_I2C_CLK_HSCLL_MASK 0xFF
|
|
#define PRM_VC_CFG_I2C_CLK_HSCLH_SHIFT 16
|
|
#define PRM_VC_CFG_I2C_CLK_HSCLH_MASK 0xFF
|
|
#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
|
|
#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
|
|
#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
|
|
#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
|
|
|
|
/* PRM_VC_VAL_BYPASS */
|
|
#define PRM_VC_VAL_BYPASS_VALID_BIT (0x1 << 24)
|
|
#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
|
|
#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
|
|
#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
|
|
#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
|
|
#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
|
|
#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
|
|
|
|
/**
|
|
* omap_vc_init() - Initialization for Voltage controller
|
|
* @speed_khz: I2C buspeed in KHz
|
|
*/
|
|
static void omap_vc_init(u16 speed_khz)
|
|
{
|
|
u32 val;
|
|
u32 sys_clk_khz, cycles_hi, cycles_low;
|
|
|
|
sys_clk_khz = get_sys_clk_freq() / 1000;
|
|
|
|
if (speed_khz > 400) {
|
|
puts("higher speed requested - throttle to 400Khz\n");
|
|
speed_khz = 400;
|
|
}
|
|
|
|
/*
|
|
* Setup the dedicated I2C controller for Voltage Control
|
|
* I2C clk - high period 40% low period 60%
|
|
*/
|
|
speed_khz /= 10;
|
|
cycles_hi = sys_clk_khz * 4 / speed_khz;
|
|
cycles_low = sys_clk_khz * 6 / speed_khz;
|
|
/* values to be set in register - less by 5 & 7 respectively */
|
|
cycles_hi -= 5;
|
|
cycles_low -= 7;
|
|
val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
|
|
(cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
|
|
writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
|
|
|
|
/*
|
|
* Master code if there are multiple masters on the I2C_SR bus.
|
|
*/
|
|
val = 0x0 << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
|
|
/* No HS mode for now */
|
|
val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
|
|
writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
|
|
}
|
|
|
|
/**
|
|
* omap_vc_bypass_send_value() - Send a data using VC Bypass command
|
|
* @sa: 7 bit I2C slave address of the PMIC
|
|
* @reg_addr: I2C register address(8 bit) address in PMIC
|
|
* @reg_data: what 8 bit data to write
|
|
*/
|
|
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
|
|
{
|
|
/*
|
|
* Unfortunately we need to loop here instead of a defined time
|
|
* use arbitary large value
|
|
*/
|
|
u32 timeout = 0xFFFF;
|
|
u32 reg_val;
|
|
|
|
sa &= PRM_VC_VAL_BYPASS_SLAVEADDR_MASK;
|
|
reg_addr &= PRM_VC_VAL_BYPASS_REGADDR_MASK;
|
|
reg_data &= PRM_VC_VAL_BYPASS_DATA_MASK;
|
|
|
|
/* program VC to send data */
|
|
reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
|
|
reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
|
|
reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
|
|
writel(reg_val, (*prcm)->prm_vc_val_bypass);
|
|
|
|
/* Signal VC to send data */
|
|
writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT,
|
|
(*prcm)->prm_vc_val_bypass);
|
|
|
|
/* Wait on VC to complete transmission */
|
|
do {
|
|
reg_val = readl((*prcm)->prm_vc_val_bypass) &
|
|
PRM_VC_VAL_BYPASS_VALID_BIT;
|
|
if (!reg_val)
|
|
break;
|
|
|
|
sdelay(100);
|
|
} while (--timeout);
|
|
|
|
/* Optional: cleanup PRM_IRQSTATUS_Ax */
|
|
/* In case we can do something about it in future.. */
|
|
if (!timeout)
|
|
return -1;
|
|
|
|
/* All good.. */
|
|
return 0;
|
|
}
|
|
|
|
void sri2c_init(void)
|
|
{
|
|
static int sri2c = 1;
|
|
|
|
if (sri2c) {
|
|
omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
|
|
sri2c = 0;
|
|
}
|
|
return;
|
|
}
|
|
|