upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/nvidia/seaboard/seaboard.c

55 lines
1.5 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/gpio.h>
/* TODO: Remove this code when the SPI switch is working */
#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
gpio_request(TEGRA_GPIO(I, 3), "uart_en");
gpio_direction_output(TEGRA_GPIO(I, 3), 0);
}
#endif
#ifdef CONFIG_MMC_SDHCI_TEGRA
/*
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
/* For power GPIO PI6 */
pinmux_tristate_disable(PMUX_PINGRP_ATA);
/* For CD GPIO PI5 */
pinmux_tristate_disable(PMUX_PINGRP_ATC);
}
#endif
void pin_mux_usb(void)
{
/* For USB0's GPIO PD0. For now, since we have no pinmux in fdt */
pinmux_tristate_disable(PMUX_PINGRP_SLXK);
/* For USB1's ULPI signals */
funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
pinmux_set_func(PMUX_PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
pinmux_tristate_disable(PMUX_PINGRP_CDEV2);
/* USB1 PHY reset GPIO */
pinmux_tristate_disable(PMUX_PINGRP_UAC);
}