upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/ixp/npe/include/IxTimeSyncAcc.h

783 lines
27 KiB

/**
* @file IxTimeSyncAcc.h
*
* @author Intel Corporation
* @date 07 May 2004
*
* @brief Header file for IXP400 Access Layer to IEEE 1588(TM) Precision
* Clock Synchronisation Protocol Hardware Assist
*
* @version 1
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/**
* @defgroup IxTimeSyncAcc IXP400 Time Sync Access Component API
*
* @brief Public API for IxTimeSyncAcc
*
* @{
*/
#ifndef IXTIMESYNCACC_H
#define IXTIMESYNCACC_H
#ifdef __ixp46X
#include "IxOsal.h"
/**
* Section for enum
*/
/**
* @ingroup IxTimeSyncAcc
*
* @enum IxTimeSyncAccStatus
*
* @brief The status as returned from the API
*/
typedef enum /**< IxTimeSyncAccStatus */
{
IX_TIMESYNCACC_SUCCESS = IX_SUCCESS, /**< Requested operation successful */
IX_TIMESYNCACC_INVALIDPARAM, /**< An invalid parameter was passed */
IX_TIMESYNCACC_NOTIMESTAMP, /**< While polling no time stamp available */
IX_TIMESYNCACC_INTERRUPTMODEINUSE, /**< Polling not allowed while operating in interrupt mode */
IX_TIMESYNCACC_FAILED /**< Internal error occurred */
}IxTimeSyncAccStatus;
/**
* @ingroup IxTimeSyncAcc
*
* @enum IxTimeSyncAccAuxMode
*
* @brief Master or Slave Auxiliary Time Stamp (Snap Shot)
*/
typedef enum /**< IxTimeSyncAccAuxMode */
{
IX_TIMESYNCACC_AUXMODE_MASTER, /**< Auxiliary Master Mode */
IX_TIMESYNCACC_AUXMODE_SLAVE, /**< Auxiliary Slave Mode */
IX_TIMESYNCACC_AUXMODE_INVALID /**< Invalid Auxiliary Mode */
}IxTimeSyncAccAuxMode;
/**
* @ingroup IxTimeSyncAcc
*
* @enum IxTimeSyncAcc1588PTPPort
*
* @brief IEEE 1588 PTP Communication Port(Channel)
*/
typedef enum /**< IxTimeSyncAcc1588PTPPort */
{
IX_TIMESYNCACC_NPE_A_1588PTP_PORT, /**< PTP Communication Port on NPE-A */
IX_TIMESYNCACC_NPE_B_1588PTP_PORT, /**< PTP Communication Port on NPE-B */
IX_TIMESYNCACC_NPE_C_1588PTP_PORT, /**< PTP Communication Port on NPE-C */
IX_TIMESYNCACC_NPE_1588PORT_INVALID /**< Invalid PTP Communication Port */
} IxTimeSyncAcc1588PTPPort;
/**
* @ingroup IxTimeSyncAcc
*
* @enum IxTimeSyncAcc1588PTPPortMode
*
* @brief Master or Slave mode for IEEE 1588 PTP Communication Port
*/
typedef enum /**< IxTimeSyncAcc1588PTPPortMode */
{
IX_TIMESYNCACC_1588PTP_PORT_MASTER, /**< PTP Communication Port in Master Mode */
IX_TIMESYNCACC_1588PTP_PORT_SLAVE, /**< PTP Communication Port in Slave Mode */
IX_TIMESYNCACC_1588PTP_PORT_ANYMODE, /**< PTP Communication Port in ANY Mode
allows time stamping of all messages
including non-1588 PTP */
IX_TIMESYNCACC_1588PTP_PORT_MODE_INVALID /**< Invalid PTP Port Mode */
}IxTimeSyncAcc1588PTPPortMode;
/**
* @ingroup IxTimeSyncAcc
*
* @enum IxTimeSyncAcc1588PTPMsgType
*
* @brief 1588 PTP Messages types that can be detected on communication port
*
* Note that client code can determine this based on master/slave mode in which
* it is already operating in and this information is made available for the sake
* of convenience only.
*/
typedef enum /**< IxTimeSyncAcc1588PTPMsgType */
{
IX_TIMESYNCACC_1588PTP_MSGTYPE_SYNC, /**< PTP Sync message sent by Master or received by Slave */
IX_TIMESYNCACC_1588PTP_MSGTYPE_DELAYREQ, /**< PTP Delay_Req message sent by Slave or received by Master */
IX_TIMESYNCACC_1588PTP_MSGTYPE_UNKNOWN /**< Other PTP and non-PTP message sent or received by both
Master and/or Slave */
} IxTimeSyncAcc1588PTPMsgType;
/**
* Section for struct
*/
/**
* @ingroup IxTimeSyncAcc
*
* @struct IxTimeSyncAccTimeValue
*
* @brief Struct to hold 64 bit SystemTime and TimeStamp values
*/
typedef struct /**< IxTimeSyncAccTimeValue */
{
UINT32 timeValueLowWord; /**< Lower 32 bits of the time value */
UINT32 timeValueHighWord; /**< Upper 32 bits of the time value */
} IxTimeSyncAccTimeValue;
/**
* @ingroup IxTimeSyncAcc
*
* @struct IxTimeSyncAccUuid
*
* @brief Struct to hold 48 bit UUID values captured in Sync or Delay_Req messages
*/
typedef struct /**< IxTimeSyncAccUuid */
{
UINT32 uuidValueLowWord; /**<The lower 32 bits of the UUID */
UINT16 uuidValueHighHalfword; /**<The upper 16 bits of the UUID */
} IxTimeSyncAccUuid;
/**
* @ingroup IxTimeSyncAcc
*
* @struct IxTimeSyncAccPtpMsgData
*
* @brief Struct for data from the PTP message returned when TimeStamp available
*/
typedef struct /**< IxTimeSyncAccPtpMsgData */
{
IxTimeSyncAcc1588PTPMsgType ptpMsgType; /**< PTP Messages type */
IxTimeSyncAccTimeValue ptpTimeStamp; /**< 64 bit TimeStamp value from PTP Message */
IxTimeSyncAccUuid ptpUuid; /**< 48 bit UUID value from the PTP Message */
UINT16 ptpSequenceNumber; /**< 16 bit Sequence Number from PTP Message */
} IxTimeSyncAccPtpMsgData;
/**
* @ingroup IxTimeSyncAcc
*
* @struct IxTimeSyncAccStats
*
* @brief Statistics for the PTP messages
*/
typedef struct /**< IxTimeSyncAccStats */
{
UINT32 rxMsgs; /**< Count of timestamps for received PTP Messages */
UINT32 txMsgs; /**< Count of timestamps for transmitted PTP Messages */
} IxTimeSyncAccStats;
/**
* @ingroup IxTimeSyncAcc
*
* @typedef IxTimeSyncAccTargetTimeCallback
*
* @brief Callback for use by target time stamp interrupt
*/
typedef void (*IxTimeSyncAccTargetTimeCallback)(IxTimeSyncAccTimeValue targetTime);
/**
* @ingroup IxTimeSyncAcc
*
* @typedef IxTimeSyncAccAuxTimeCallback
*
* @brief Callback for use by auxiliary time interrupts
*/
typedef void (*IxTimeSyncAccAuxTimeCallback)(IxTimeSyncAccAuxMode auxMode,
IxTimeSyncAccTimeValue auxTime);
/*
* Section for prototypes interface functions
*/
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigSet(
IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAcc1588PTPPortMode ptpPortMode)
*
* @brief Configures the IEEE 1588 message detect on particular PTP port.
*
* @param ptpPort [in] - PTP port to config
* @param ptpPortMode [in]- Port to operate in Master or Slave mode
*
* This API will enable the time stamping on a particular PTP port.
*
* @li Re-entrant : No
* @li ISR Callable : No
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccPTPPortConfigSet(IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAcc1588PTPPortMode ptpPortMode);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigGet(
IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAcc1588PTPPortMode *ptpPortMode)
*
* @brief Retrieves IEEE 1588 PTP operation mode on particular PTP port.
*
* @param ptpPort [in] - PTP port
* @param ptpPortMode [in]- Mode of operation of PTP port (Master or Slave)
*
* This API will identify the time stamping capability of a PTP port by means
* of obtaining its mode of operation.
*
* @li Re-entrant : No
* @li ISR Callable : No
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccPTPPortConfigGet(IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAcc1588PTPPortMode *ptpPortMode);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccPTPRxPoll(
IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAccPtpMsgData *ptpMsgData)
*
* @brief Polls the IEEE 1588 message/time stamp detect status on a particular
* PTP Port on the Receive side.
*
* @param ptpPort [in] - PTP port to poll
* @param ptpMsgData [out] - Current TimeStamp and other Data
*
* This API will poll for the availability of a time stamp on the received Sync
* (Slave) or Delay_Req (Master) messages.
* The client application will provide the buffer.
*
* @li Re-entrant : No
* @li ISR Callable : No
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccPTPRxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAccPtpMsgData *ptpMsgData);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccPTPTxPoll(
IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAccPtpMsgData *ptpMsgData)
*
*
* @brief Polls the IEEE 1588 message/time stamp detect status on a particular
* PTP Port on the Transmit side.
*
* @param ptpPort [in] - PTP port to poll
* @param ptpMsgData [out] - Current TimeStamp and other Data
*
* This API will poll for the availability of a time stamp on the transmitted
* Sync (Master) or Delay_Req (Slave) messages.
* The client application will provide the buffer.
*
* @li Re-entrant : No
* @li ISR Callable : No
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccPTPTxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
IxTimeSyncAccPtpMsgData *ptpMsgData);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeSet(
IxTimeSyncAccTimeValue systemTime)
*
* @brief Sets the System Time in the IEEE 1588 hardware assist block
*
* @param systemTime [in] - Value to set System Time
*
* This API will set the SystemTime to given value.
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccSystemTimeSet(IxTimeSyncAccTimeValue systemTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeGet(
IxTimeSyncAccTimeValue *systemTime)
*
* @brief Gets the System Time from the IEEE 1588 hardware assist block
*
* @param systemTime [out] - Copy the current System Time into the client
* application provided buffer
*
* This API will get the SystemTime from IEEE1588 block and return to client
*
* @li Re-entrant : no
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccSystemTimeGet(IxTimeSyncAccTimeValue *systemTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateSet(
UINT32 tickRate)
*
* @brief Sets the Tick Rate (Frequency Scaling Value) in the IEEE 1588
* hardware assist block
*
* @param tickRate [in] - Value to set Tick Rate
*
* This API will set the Tick Rate (Frequency Scaling Value) in the IEEE
* 1588 block to the given value. The Accumulator register (not client
* visible) is incremented by this TickRate value every clock cycle. When
* the Accumulator overflows, the SystemTime is incremented by one. This
* TickValue can therefore be used to adjust the system timer.
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTickRateSet(UINT32 tickRate);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateGet(
UINT32 *tickRate)
*
* @brief Gets the Tick Rate (Frequency Scaling Value) from the IEEE 1588
* hardware assist block
*
* @param tickRate [out] - Current Tick Rate value in the IEEE 1588 block
*
* This API will get the TickRate on IEE15588 block. Refer to @ref
* ixTimeSyncAccTickRateSet for notes on usage of this value.
*
* @li Reentrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTickRateGet(UINT32 *tickRate);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptEnable(
IxTimeSyncAccTargetTimeCallback targetTimeCallback)
*
* @brief Enables the interrupt to verify the condition where the System Time
* greater or equal to the Target Time in the IEEE 1588 hardware assist block.
* If the condition is true an interrupt will be sent to XScale.
*
* @param targetTimeCallback [in] - Callback to be invoked when interrupt fires
*
* This API will enable the Target Time reached/hit condition interrupt.
*
* NOTE: The client application needs to ensure that the APIs
* @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
* @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
* manner with respect to each other.
*
* @li Re-entrant : no
* @li ISR Callable : yes
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTargetTimeInterruptEnable(IxTimeSyncAccTargetTimeCallback targetTimeCallback);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptDisable(
void)
*
* @brief Disables the interrupt for the condition explained in the function
* description of @ref ixTimeSyncAccTargetTimeInterruptEnable.
*
* This API will disable the Target Time interrupt.
*
* NOTE: The client application needs to ensure that the APIs
* @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
* @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
* manner with respect to each other.
*
* @li Re-entrant : no
* @li ISR Callable : yes
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTargetTimeInterruptDisable(void);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimePoll(
BOOL *ttmPollFlag,
IxTimeSyncAccTimeValue *targetTime)
*
* @brief Poll to verify the condition where the System Time greater or equal to
* the Target Time in the IEEE 1588 hardware assist block. If the condition is
* true an event flag is set in the hardware.
*
* @param ttmPollFlag [out] - TRUE if the target time reached/hit condition event set
* FALSE if the target time reached/hit condition event is
not set
* @param targetTime [out] - Capture current targetTime into client provided buffer
*
* Poll the target time reached/hit condition status. Return true and the current
* target time value, if the condition is true else return false.
*
* NOTE: The client application will need to clear the event flag that will be set
* as long as the condition that the System Time greater or equal to the Target Time is
* valid, in one of the following ways:
* 1) Invoke the API to change the target time
* 2) Change the system timer value
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
* @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTargetTimePoll(BOOL *ttmPollFlag,
IxTimeSyncAccTimeValue *targetTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeSet(
IxTimeSyncAccTimeValue targetTime)
*
* @brief Sets the Target Time in the IEEE 1588 hardware assist block
*
* @param targetTime [in] - Value to set Target Time
*
* This API will set the Target Time to a given value.
*
* NOTE: The client application needs to ensure that the APIs
* @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
* @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
* manner with respect to each other.
*
* @li Reentrant : no
* @li ISR Callable : yes
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTargetTimeSet(IxTimeSyncAccTimeValue targetTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeGet(
IxTimeSyncAccTimeValue *targetTime)
*
* @brief Gets the Target Time in the IEEE 1588 hardware assist block
*
* @param targetTime [out] - Copy current time to client provided buffer
*
* This API will get the Target Time from IEEE 1588 block and return to the
* client application
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccTargetTimeGet(IxTimeSyncAccTimeValue *targetTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptEnable(
IxTimeSyncAccAuxMode auxMode,
IxTimeSyncAccAuxTimeCallback auxTimeCallback)
*
* @brief Enables the interrupt notification for the given mode of Auxiliary Time
* Stamp in the IEEE 1588 hardware assist block
*
* @param auxMode [in] - Auxiliary time stamp register (slave or master) to use
* @param auxTimeCallback [in] - Callback to be invoked when interrupt fires
*
* This API will enable the Auxiliary Master/Slave Time stamp Interrupt.
*
* <pre>
* NOTE: 1) An individual callback is to be registered for each Slave and Master
* Auxiliary Time Stamp registers. Thus to register for both Master and Slave time
* stamp interrupts either the same callback or two separate callbacks the API has
* to be invoked twice.
* 2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for
* slave mode is tied to GPIO 8 pin. This signal is software routed by default to
* PCI for backwards compatibility with the IXDP425 Development Platform. This
* routing must be disabled for the auxiliary slave time stamp register to work
* properly. The following commands may be used to accomplish this. However, refer
* to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for
* more specific information.
*
* For Linux (at the Redboot prompt i.e., before loading zImage):
* mfill -b 0x54100000 -1 -l 1 -p 8
* mfill -b 0x54100001 -1 -l 1 -p 0x7f
* For vxWorks, at the prompt:
* intDisable(25)
* ixdp400FpgaIODetach(8)
* </pre>
*
* @li Re-entrant : no
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or
invalid auxiliary snapshot mode
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode,
IxTimeSyncAccAuxTimeCallback auxTimeCallback);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable(
IxTimeSyncAccAuxMode auxMode)
*
* @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp
* in the IEEE 1588 hardware assist block
*
* @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which
* the interrupt will be disabled.
*
* This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave)
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll(
IxTimeSyncAccAuxMode auxMode,
BOOL *auxPollFlag,
IxTimeSyncAccTimeValue *auxTime)
*
* @brief Poll for the Auxiliary Time Stamp captured for the mode indicated
* (Master or Slave)
*
* @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked
* @param auxPollFlag [out] - TRUE if the time stamp captured in auxiliary
snapshot register
* FALSE if the time stamp not captured in
auxiliary snapshot register
* @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the
* client provided buffer
*
* Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based
* on the mode specified. Return true and the contents of the Auxiliary snapshot,
* if it is available else return false.
*
* Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable
* for more information for Auxiliary Slave mode.
*
* @li Re-entrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag,
callback or invalid auxiliary snapshot mode
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
* @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode,
BOOL *auxPollFlag,
IxTimeSyncAccTimeValue *auxTime);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void)
*
* @brief Resets the IEEE 1588 hardware assist block
*
* Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block
*
* @li Reentrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccReset(void);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats
*timeSyncStats)
*
* @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer
*
* @param timeSyncStats [out] - TimeSync statistics counter values
*
* This API will return the statistics of the received or transmitted messages.
*
* NOTE: 1) These counters are updated only when the client polls for the time
* stamps or interrupt are enabled. This is because the IxTimeSyncAcc module
* does not either transmit or receive messages and does only run the code
* when explicit requests received by client application.
*
* 2) These statistics reflect the number of valid PTP messages exchanged
* in Master and Slave modes but includes all the messages (including valid
* non-PTP messages) while operating in the Any mode.
*
* @li Reentrant : no
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats);
/**
* @ingroup IxTimeSyncAcc
*
* @fn void ixTimeSyncAccStatsReset(void)
*
* @brief Reset Time Sync statistics
*
* This API will reset the statistics counters of the TimeSync access layer.
*
* @li Reentrant : yes
* @li ISR Callable: no
*
* @return @li None
*/
PUBLIC void
ixTimeSyncAccStatsReset(void);
/**
* @ingroup IxTimeSyncAcc
*
* @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void)
*
* @brief Displays the Time Sync current status
*
* This API will display status on the current configuration of the IEEE
* 1588 hardware assist block, contents of the various time stamp registers,
* outstanding interrupts and/or events.
*
* Note that this is intended for debug only, and in contrast to the other
* functions, it does not clear the any of the status bits associated with
* active timestamps and so is passive in its nature.
*
* @li Reentrant : yes
* @li ISR Callable : no
*
* @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
* @li IX_TIMESYNCACC_FAILED - Internal error occurred
*/
PUBLIC IxTimeSyncAccStatus
ixTimeSyncAccShow(void);
#endif /* __ixp46X */
#endif /* IXTIMESYNCACC_H */
/**
* @} defgroup IxTimeSyncAcc
*/