upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
305 lines
8.3 KiB
305 lines
8.3 KiB
/*
|
|
* (C) Copyright 2003-2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
|
|
|
|
/* CPU and board */
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
|
|
#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
|
|
|
|
|
|
/*
|
|
* Supported commands
|
|
*/
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CFG_CMD_ASKENV | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_REGINFO | \
|
|
CFG_CMD_IMMAP | \
|
|
CFG_CMD_ELF | \
|
|
CFG_CMD_MII | \
|
|
CFG_CMD_BEDBUG | \
|
|
CFG_CMD_NET | \
|
|
CFG_CMD_PING)
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_NETCONSOLE 1 /* network console */
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_PHY_ADDR 0x2
|
|
#define CONFIG_PHY_TYPE 0x79c874
|
|
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b"
|
|
#define DEBUG_BOOTKEYS 0
|
|
#undef CONFIG_AUTOBOOT_DELAY_STR
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
|
|
"press \"<Esc><Esc>\" to stop\n"
|
|
|
|
#define CONFIG_ETHADDR 00:50:C2:40:10:00
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
|
|
/*
|
|
* Default environment settings
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"sdram_test=0\0" \
|
|
"netdev=eth0\0" \
|
|
"hostname=motionpro\0" \
|
|
"netmask=255.255.0.0\0" \
|
|
"ipaddr=192.168.160.22\0" \
|
|
"serverip=192.168.1.1\0" \
|
|
"gatewayip=192.168.1.1\0" \
|
|
"kernel_addr=200000\0" \
|
|
"u-boot_addr=100000\0" \
|
|
"kernel_sector=20\0" \
|
|
"kernel_size=1000\0" \
|
|
"console=ttyS0,115200\0" \
|
|
"rootpath=/opt/eldk-4.1/ppc_6xx\0" \
|
|
"bootfile=/tftpboot/motionpro/uImage\0" \
|
|
"u-boot=/tftpboot/motionpro/u-boot.bin\0" \
|
|
"load=tftp $(u-boot_addr) $(u-boot)\0" \
|
|
"update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
|
|
"cp.b $(u-boot_addr) fff00000 $(filesize);" \
|
|
"prot on fff00000 fff3ffff\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs $(bootargs) console=$(console) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
|
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
|
|
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
|
|
"$(ramdisk_addr)\0" \
|
|
"net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \
|
|
"bootm $(kernel_addr)\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
"fstype=ext3\0" \
|
|
"fatargs=setenv bootargs init=/linuxrc rw\0" \
|
|
""
|
|
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
|
|
|
|
|
/*
|
|
* do board-specific init
|
|
*/
|
|
#define CONFIG_BOARD_EARLY_INIT_R 1
|
|
|
|
|
|
/*
|
|
* Low level configuration
|
|
*/
|
|
|
|
|
|
/*
|
|
* Clock configuration: SYS_XTALIN = 25MHz
|
|
*/
|
|
#define CFG_MPC5XXX_CLKIN 25000000
|
|
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
/*
|
|
* Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
|
|
* Setting MBAR to otherwise will cause system hang when using SmartDMA such
|
|
* as network commands.
|
|
*/
|
|
#define CFG_MBAR 0xf0000000
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
|
|
/*
|
|
* If building for running out of SDRAM, then MBAR has been set up beforehand
|
|
* (e.g., by the BDI). Otherwise we must specify the default boot-up value of
|
|
* MBAR, as given in the doccumentation.
|
|
*/
|
|
#if TEXT_BASE == 0x00100000
|
|
#define CFG_DEFAULT_MBAR 0xf0000000
|
|
#else /* TEXT_BASE != 0x00100000 */
|
|
#define CFG_DEFAULT_MBAR 0x80000000
|
|
#define CFG_LOWBOOT 1
|
|
#endif /* TEXT_BASE == 0x00100000 */
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
#define CFG_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
|
|
|
|
|
|
/*
|
|
* Chip selects configuration
|
|
*/
|
|
/* Boot Chipselect */
|
|
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
|
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
|
#define CFG_BOOTCS_CFG 0x03035D00
|
|
|
|
/* Flash memory addressing */
|
|
#define CFG_CS0_START CFG_FLASH_BASE
|
|
#define CFG_CS0_SIZE CFG_FLASH_SIZE
|
|
#define CFG_CS0_CFG CFG_BOOTCS_CFG
|
|
|
|
/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
|
|
#define CFG_CS1_START 0x50000000
|
|
#define CFG_CS1_SIZE 0x10000
|
|
#define CFG_CS1_CFG 0x05055800
|
|
|
|
/* Local register access */
|
|
#define CFG_CS2_START 0x50010000
|
|
#define CFG_CS2_SIZE 0x10000
|
|
#define CFG_CS2_CFG 0x05055800
|
|
|
|
/* Anybus CompactCom Module memory addressing */
|
|
#define CFG_CS3_START 0x50020000
|
|
#define CFG_CS3_SIZE 0x10000
|
|
#define CFG_CS3_CFG 0x05055800
|
|
|
|
/* No burst and dead cycle = 2 for all CSs */
|
|
#define CFG_CS_BURST 0x00000000
|
|
#define CFG_CS_DEADCYCLE 0x22222222
|
|
|
|
|
|
/*
|
|
* SDRAM configuration
|
|
*/
|
|
/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */
|
|
#define SDRAM_CONFIG1 0x52222600
|
|
#define SDRAM_CONFIG2 0x88b70000
|
|
#define SDRAM_CONTROL 0x50570000
|
|
#define SDRAM_MODE 0x008d0000
|
|
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CFG_FLASH_CFI_DRIVER 1
|
|
#define CFG_FLASH_BASE 0xff000000
|
|
#define CFG_FLASH_SIZE 0x01000000
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
|
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
|
|
#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
|
|
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
/* This has to be a multiple of the Flash sector size */
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
|
|
#define CFG_ENV_SIZE 0x1000
|
|
#define CFG_ENV_SECT_SIZE 0x10000
|
|
|
|
|
|
/*
|
|
* Pin multiplexing configuration
|
|
*/
|
|
|
|
/* PSC1: UART1
|
|
* PSC2: GPIO (default)
|
|
* PSC3: GPIO (default)
|
|
* USB: 2xUART4/5
|
|
* Ethernet: Ethernet 100Mbit with MD
|
|
* Timer: CAN2/GPIO
|
|
* PSC6/IRDA: GPIO (default)
|
|
*/
|
|
#define CFG_GPS_PORT_CONFIG 0x1105a004
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CFG_HID0_FINAL HID0_ICE
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
|
|
|
|
/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
|
|
#define CFG_RESET_ADDRESS 0xfff00100
|
|
|
|
#endif /* __CONFIG_H */
|
|
|