upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/mpc86xx/cache.S

378 lines
7.3 KiB

#include <config.h>
#include <mpc86xx.h>
#include <version.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#ifndef CACHE_LINE_SIZE
# define CACHE_LINE_SIZE L1_CACHE_BYTES
#endif
#if CACHE_LINE_SIZE == 128
#define LG_CACHE_LINE_SIZE 7
#elif CACHE_LINE_SIZE == 32
#define LG_CACHE_LINE_SIZE 5
#elif CACHE_LINE_SIZE == 16
#define LG_CACHE_LINE_SIZE 4
#elif CACHE_LINE_SIZE == 8
#define LG_CACHE_LINE_SIZE 3
#else
# error "Invalid cache line size!"
#endif
/*
* Most of this code is taken from 74xx_7xx/cache.S
* and then cleaned up a bit
*/
/*
* Invalidate L1 instruction cache.
*/
_GLOBAL(invalidate_l1_instruction_cache)
/* use invalidate-all bit in HID0 */
mfspr r3,HID0
ori r3,r3,HID0_ICFI
mtspr HID0,r3
isync
blr
/*
* Invalidate L1 data cache.
*/
_GLOBAL(invalidate_l1_data_cache)
mfspr r3,HID0
ori r3,r3,HID0_DCFI
mtspr HID0,r3
isync
blr
/*
* Flush data cache.
*/
_GLOBAL(flush_dcache)
lis r3,0
lis r5,CACHE_LINE_SIZE
flush:
cmp 0,1,r3,r5
bge done
lwz r5,0(r3)
lis r5,CACHE_LINE_SIZE
addi r3,r3,0x4
b flush
done:
blr
/*
* Write any modified data cache blocks out to memory
* and invalidate the corresponding instruction cache blocks.
* This is a no-op on the 601.
*
* flush_icache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_icache_range)
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
mr r6,r3
1: dcbst 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbst's to get to ram */
mtctr r4
2: icbi 0,r6
addi r6,r6,CACHE_LINE_SIZE
bdnz 2b
sync /* additional sync needed on g4 */
isync
blr
/*
* Write any modified data cache blocks out to memory.
* Does not invalidate the corresponding cache lines (especially for
* any corresponding instruction cache).
*
* clean_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(clean_dcache_range)
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5 /* align r3 down to cache line */
subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
add r4,r4,r5 /* r4 += cache_line_size-1 */
srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
beqlr /* if r4 == 0 return */
mtctr r4 /* ctr = r4 */
sync
1: dcbst 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbst's to get to ram */
blr
/*
* Write any modified data cache blocks out to memory
* and invalidate the corresponding instruction cache blocks.
*
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
sync
1: dcbf 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbf's to get to ram */
blr
/*
* Like above, but invalidate the D-cache. This is used by the 8xx
* to invalidate the cache so the PPC core doesn't get stale data
* from the CPM (no cache snooping here :-).
*
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
sync
1: dcbi 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbi's to get to ram */
blr
/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
*
* void __flush_page_to_ram(void *page)
*/
_GLOBAL(__flush_page_to_ram)
rlwinm r3,r3,0,0,19 /* Get page base address */
li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
mtctr r4
mr r6,r3
0: dcbst 0,r3 /* Write line to ram */
addi r3,r3,CACHE_LINE_SIZE
bdnz 0b
sync
mtctr r4
1: icbi 0,r6
addi r6,r6,CACHE_LINE_SIZE
bdnz 1b
sync
isync
blr
/*
* Flush a particular page from the instruction cache.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
*
* void __flush_icache_page(void *page)
*/
_GLOBAL(__flush_icache_page)
li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
mtctr r4
1: icbi 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync
isync
blr
/*
* Clear a page using the dcbz instruction, which doesn't cause any
* memory traffic (except to write out any cache lines which get
* displaced). This only works on cacheable memory.
*/
_GLOBAL(clear_page)
li r0,4096/CACHE_LINE_SIZE
mtctr r0
1: dcbz 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
blr
/*
* Enable L1 Instruction cache
*/
_GLOBAL(icache_enable)
mfspr r3, HID0
li r5, HID0_ICFI|HID0_ILOCK
andc r3, r3, r5
ori r3, r3, HID0_ICE
ori r5, r3, HID0_ICFI
mtspr HID0, r5
mtspr HID0, r3
isync
blr
/*
* Disable L1 Instruction cache
*/
_GLOBAL(icache_disable)
mflr r4
bl invalidate_l1_instruction_cache /* uses r3 */
sync
mtlr r4
mfspr r3, HID0
li r5, 0
ori r5, r5, HID0_ICE
andc r3, r3, r5
mtspr HID0, r3
isync
blr
/*
* Is instruction cache enabled?
*/
_GLOBAL(icache_status)
mfspr r3, HID0
andi. r3, r3, HID0_ICE
blr
_GLOBAL(l1dcache_enable)
mfspr r3, HID0
li r5, HID0_DCFI|HID0_DLOCK
andc r3, r3, r5
mtspr HID0, r3 /* no invalidate, unlock */
ori r3, r3, HID0_DCE
ori r5, r3, HID0_DCFI
mtspr HID0, r5 /* enable + invalidate */
mtspr HID0, r3 /* enable */
sync
blr
/*
* Enable data cache(s) - L1 and optionally L2
* Calls l2cache_enable. LR saved in r5
*/
_GLOBAL(dcache_enable)
mfspr r3, HID0
li r5, HID0_DCFI|HID0_DLOCK
andc r3, r3, r5
mtspr HID0, r3 /* no invalidate, unlock */
ori r3, r3, HID0_DCE
ori r5, r3, HID0_DCFI
mtspr HID0, r5 /* enable + invalidate */
mtspr HID0, r3 /* enable */
sync
#ifdef CONFIG_SYS_L2
mflr r5
bl l2cache_enable /* uses r3 and r4 */
sync
mtlr r5
#endif
blr
/*
* Disable data cache(s) - L1 and optionally L2
* Calls flush_dcache and l2cache_disable_no_flush.
* LR saved in r4
*/
_GLOBAL(dcache_disable)
mflr r4 /* save link register */
bl flush_dcache /* uses r3 and r5 */
sync
mfspr r3, HID0
li r5, HID0_DCFI|HID0_DLOCK
andc r3, r3, r5
mtspr HID0, r3 /* no invalidate, unlock */
li r5, HID0_DCE|HID0_DCFI
andc r3, r3, r5 /* no enable, no invalidate */
mtspr HID0, r3
sync
#ifdef CONFIG_SYS_L2
bl l2cache_disable_no_flush /* uses r3 */
#endif
mtlr r4 /* restore link register */
blr
/*
* Is data cache enabled?
*/
_GLOBAL(dcache_status)
mfspr r3, HID0
andi. r3, r3, HID0_DCE
blr
/*
* Invalidate L2 cache using L2I, assume L2 is enabled
*/
_GLOBAL(l2cache_invalidate)
mfspr r3, l2cr
rlwinm. r3, r3, 0, 0, 0
beq 1f
mfspr r3, l2cr
rlwinm r3, r3, 0, 1, 31
#ifdef CONFIG_ALTIVEC
dssall
#endif
sync
mtspr l2cr, r3
sync
1: mfspr r3, l2cr
oris r3, r3, L2CR_L2I@h
mtspr l2cr, r3
invl2:
mfspr r3, l2cr
andis. r3, r3, L2CR_L2I@h
bne invl2
blr
/*
* Enable L2 cache
* Calls l2cache_invalidate. LR is saved in r4
*/
_GLOBAL(l2cache_enable)
mflr r4 /* save link register */
bl l2cache_invalidate /* uses r3 */
sync
lis r3, L2_ENABLE@h
ori r3, r3, L2_ENABLE@l
mtspr l2cr, r3
isync
mtlr r4 /* restore link register */
blr
/*
* Disable L2 cache
* Calls flush_dcache. LR is saved in r4
*/
_GLOBAL(l2cache_disable)
mflr r4 /* save link register */
bl flush_dcache /* uses r3 and r5 */
sync
mtlr r4 /* restore link register */
l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
lis r3, L2_INIT@h
ori r3, r3, L2_INIT@l
mtspr l2cr, r3
isync
blr