upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
63 lines
2.1 KiB
63 lines
2.1 KiB
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2017 NXP Semiconductor, Inc.
|
|
*
|
|
*/
|
|
#ifndef __FSL_STREAM_ID_H
|
|
#define __FSL_STREAM_ID_H
|
|
|
|
/*
|
|
* Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices
|
|
* are not hardwired and are programmed by sw. There are a limited number
|
|
* of stream IDs available, and the partitioning of them is scenario
|
|
* dependent. This header defines the partitioning between legacy, PCI,
|
|
* and DPAA1 devices.
|
|
*
|
|
* This partitioning can be customized in this file depending
|
|
* on the specific hardware config:
|
|
*
|
|
* -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc)
|
|
* -all legacy devices get a unique stream ID assigned and programmed in
|
|
* their AMQR registers by u-boot
|
|
*
|
|
* -PCIe
|
|
* -there is a range of stream IDs set aside for PCI in this
|
|
* file. U-boot will scan the PCI bus and for each device discovered:
|
|
* -allocate a streamID
|
|
* -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
|
|
* -set a msi-map entry in the PEXn controller node in the
|
|
* device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
|
|
* for more info on the msi-map definition)
|
|
* -set a iommu-map entry in the PEXn controller node in the
|
|
* device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
|
|
* for more info on the iommu-map definition)
|
|
*
|
|
* -DPAA1
|
|
* - Stream ids for DPAA1 use are reserved for future usecase.
|
|
*
|
|
*/
|
|
|
|
|
|
#define FSL_INVALID_STREAM_ID 0
|
|
|
|
/* legacy devices */
|
|
#define FSL_USB1_STREAM_ID 1
|
|
#define FSL_USB2_STREAM_ID 2
|
|
#define FSL_USB3_STREAM_ID 3
|
|
#define FSL_SDHC_STREAM_ID 4
|
|
#define FSL_SATA_STREAM_ID 5
|
|
#define FSL_QE_STREAM_ID 6
|
|
#define FSL_QDMA_STREAM_ID 7
|
|
#define FSL_EDMA_STREAM_ID 8
|
|
#define FSL_ETR_STREAM_ID 9
|
|
#define FSL_DEBUG_STREAM_ID 10
|
|
|
|
/* PCI - programmed in PEXn_LUT */
|
|
#define FSL_PEX_STREAM_ID_START 11
|
|
#define FSL_PEX_STREAM_ID_END 26
|
|
|
|
/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */
|
|
#define FSL_DPAA1_STREAM_ID_START 27
|
|
#define FSL_DPAA1_STREAM_ID_END 63
|
|
|
|
#endif
|
|
|