upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/powerpc/cpu/mpc8220/dramSetup.c

752 lines
20 KiB

/*
* (C) Copyright 2004, Freescale, Inc
* TsiChung Liew, Tsi-Chung.Liew@freescale.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
DESCRIPTION
Read Dram spd and base on its information to calculate the memory size,
characteristics to initialize the dram on MPC8220
*/
#include <common.h>
#include <mpc8220.h>
#include "i2cCore.h"
#include "dramSetup.h"
DECLARE_GLOBAL_DATA_PTR;
#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
{
int i;
for (i = 0; i < I2C_POLL_COUNT; i++) {
if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
return (OK);
}
return (ERROR);
}
int spd_clear (volatile i2c8220_t * pi2c)
{
pi2c->adr = 0;
pi2c->fdr = 0;
pi2c->cr = 0;
pi2c->sr = 0;
return (OK);
}
int spd_stop (volatile i2c8220_t * pi2c)
{
pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
return ERROR;
return (OK);
}
int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
{
pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
*readb = pi2c->dr; /* Read a byte */
/*
Set I2C_CTRL_TXAK will cause Transfer pending and
set I2C_CTRL_STA will cause Interrupt pending
*/
if (*index != 2) {
if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
return ERROR;
}
if (*index != 1) {
if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
return ERROR;
}
return (OK);
}
int readSpdData (u8 * spdData)
{
volatile i2c8220_t *pi2cReg;
volatile pcfg8220_t *pcfg;
u8 slvAdr = DRAM_SPD;
u8 Tmp;
int Length = SPD_SIZE;
int i = 0;
/* Enable Port Configuration for SDA and SDL signals */
pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
__asm__ ("sync");
pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
__asm__ ("sync");
/* Points the structure to I2c mbar memory offset */
pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
/* Clear FDR, ADR, SR and CR reg */
pi2cReg->adr = 0;
pi2cReg->fdr = 0;
pi2cReg->cr = 0;
pi2cReg->sr = 0;
/* Set for fix XLB Bus Frequency */
switch (gd->bus_clk) {
case 60000000:
pi2cReg->fdr = 0x15;
break;
case 70000000:
pi2cReg->fdr = 0x16;
break;
case 80000000:
pi2cReg->fdr = 0x3a;
break;
case 90000000:
pi2cReg->fdr = 0x17;
break;
case 100000000:
pi2cReg->fdr = 0x3b;
break;
case 110000000:
pi2cReg->fdr = 0x18;
break;
case 120000000:
pi2cReg->fdr = 0x19;
break;
case 130000000:
pi2cReg->fdr = 0x1a;
break;
}
pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
/*
The I2C bus should be in Idle state. If the bus is busy,
clear the STA bit in control register
*/
if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
pi2cReg->cr &= ~I2C_CTL_STA;
/* Check again if it is still busy, return error if found */
if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
return ERROR;
}
pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
return ERROR;
/* Write slave address */
pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
pi2cReg->dr = slvAdr; /* Write a byte */
if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
spd_stop (pi2cReg);
return ERROR;
}
if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
spd_stop (pi2cReg);
return ERROR;
}
/* Issue the offset to start */
pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
pi2cReg->dr = 0; /* Write a byte */
if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
spd_stop (pi2cReg);
return ERROR;
}
if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
spd_stop (pi2cReg);
return ERROR;
}
/* Set repeat start */
pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
pi2cReg->dr = slvAdr | 1; /* Write a byte */
if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
spd_stop (pi2cReg);
return ERROR;
}
if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
spd_stop (pi2cReg);
return ERROR;
}
if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
return ERROR;
pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
return ERROR;
/* Dummy Read */
if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
spd_stop (pi2cReg);
return ERROR;
}
i = 0;
while (Length) {
if (Length == 2)
pi2cReg->cr |= I2C_CTL_TXAK;
if (Length == 1)
pi2cReg->cr &= ~I2C_CTL_STA;
if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
return spd_stop (pi2cReg);
}
i++;
Length--;
spdData++;
}
/* Stop the service */
spd_stop (pi2cReg);
return OK;
}
int getBankInfo (int bank, draminfo_t * pBank)
{
int status;
int checksum;
int count;
u8 spdData[SPD_SIZE];
if (bank > 2 || pBank == 0) {
/* illegal values */
return (-42);
}
status = readSpdData (&spdData[0]);
if (status < 0)
return (-1);
/* check the checksum */
for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
checksum += spdData[count];
checksum = checksum - ((checksum / 256) * 256);
if (checksum != spdData[LOC_CHECKSUM])
return (-2);
/* Get the memory type */
if (!
((spdData[LOC_TYPE] == TYPE_DDR)
|| (spdData[LOC_TYPE] == TYPE_SDR)))
/* not one of the types we support */
return (-3);
pBank->type = spdData[LOC_TYPE];
/* Set logical banks */
pBank->banks = spdData[LOC_LOGICAL_BANKS];
/* Check that we have enough physical banks to cover the bank we are
* figuring out. Odd-numbered banks correspond to the second bank
* on the device.
*/
if (bank & 1) {
/* Second bank of a "device" */
if (spdData[LOC_PHYS_BANKS] < 2)
/* this bank doesn't exist on the "device" */
return (-4);
if (spdData[LOC_ROWS] & 0xf0)
/* Two asymmetric banks */
pBank->rows = spdData[LOC_ROWS] >> 4;
else
pBank->rows = spdData[LOC_ROWS];
if (spdData[LOC_COLS] & 0xf0)
/* Two asymmetric banks */
pBank->cols = spdData[LOC_COLS] >> 4;
else
pBank->cols = spdData[LOC_COLS];
} else {
/* First bank of a "device" */
pBank->rows = spdData[LOC_ROWS];
pBank->cols = spdData[LOC_COLS];
}
pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
pBank->bursts = spdData[LOC_BURSTS];
pBank->CAS = spdData[LOC_CAS];
pBank->CS = spdData[LOC_CS];
pBank->WE = spdData[LOC_WE];
pBank->Trp = spdData[LOC_Trp];
pBank->Trcd = spdData[LOC_Trcd];
pBank->buffered = spdData[LOC_Buffered] & 1;
pBank->refresh = spdData[LOC_REFRESH];
return (0);
}
/* checkMuxSetting -- given a row/column device geometry, return a mask
* of the valid DRAM controller addr_mux settings for
* that geometry.
*
* Arguments: u8 rows: number of row addresses in this device
* u8 columns: number of column addresses in this device
*
* Returns: a mask of the allowed addr_mux settings for this
* geometry. Each bit in the mask represents a
* possible addr_mux settings (for example, the
* (1<<2) bit in the mask represents the 0b10 setting)/
*
*/
u8 checkMuxSetting (u8 rows, u8 columns)
{
muxdesc_t *pIdx, *pMux;
u8 mask;
int lrows, lcolumns;
u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
/* Setup MuxDescriptor in SRAM space */
/* MUXDESC AddressRuns [] = {
{ 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
{ 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
{ 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
{ 0xff } / list terminator /
}; */
pIdx = (muxdesc_t *) & mux[0];
/* Check rows x columns against each possible address mux setting */
for (pMux = pIdx, mask = 0;; pMux++) {
lrows = rows;
lcolumns = columns;
if (pMux->MuxValue == 0xff)
break; /* end of list */
/* For a given mux setting, since we want all the memory in a
* device to be contiguous, we want the device "use up" the
* address lines such that there are no extra column or row
* address lines on the device.
*/
lcolumns -= pMux->Columns;
if (lcolumns < 0)
/* Not enough columns to get to the rows */
continue;
lrows -= pMux->Rows;
if (lrows > 0)
/* we have extra rows left -- can't do that! */
continue;
/* At this point, we either have to have used up all the
* rows or we have to have no columns left.
*/
if (lcolumns != 0 && lrows != 0)
/* rows AND columns are left. Bad! */
continue;
lcolumns -= pMux->MoreColumns;
if (lcolumns <= 0)
mask |= (1 << pMux->MuxValue);
}
return (mask);
}
u32 dramSetup (void)
{
draminfo_t DramInfo[TOTAL_BANK];
draminfo_t *pDramInfo;
u32 size, temp, cfg_value, mode_value, refresh;
u8 *ptr;
u8 bursts, Trp, Trcd, type, buffered;
u8 muxmask, rows, columns;
int count, banknum;
u32 *prefresh, *pIdx;
u32 refrate[8] = { 15625, 3900, 7800, 31300,
62500, 125000, 0xffffffff, 0xffffffff
};
volatile sysconf8220_t *sysconf;
volatile memctl8220_t *memctl;
sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
/* Set everything in the descriptions to zero */
ptr = (u8 *) & DramInfo[0];
for (count = 0; count < sizeof (DramInfo); count++)
*ptr++ = 0;
for (banknum = 0; banknum < TOTAL_BANK; banknum++)
sysconf->cscfg[banknum];
/* Descriptions of row/column address muxing for various
* addr_mux settings.
*/
pIdx = prefresh = (u32 *) & refrate[0];
/* Get all the info for all three logical banks */
bursts = 0xff;
Trp = 0;
Trcd = 0;
type = 0;
buffered = 0xff;
refresh = 0xffffffff;
muxmask = 0xff;
/* Two bank, CS0 and CS1 */
for (banknum = 0, pDramInfo = &DramInfo[0];
banknum < TOTAL_BANK; banknum++, pDramInfo++) {
pDramInfo->ordinal = banknum; /* initial sorting */
if (getBankInfo (banknum, pDramInfo) < 0)
continue;
/* get cumulative parameters of all three banks */
if (type && pDramInfo->type != type)
return 0;
type = pDramInfo->type;
rows = pDramInfo->rows;
columns = pDramInfo->cols;
/* This chip only supports 13 DRAM memory lines, but some devices
* have 14 rows. To deal with this, ignore the 14th address line
* by limiting the number of rows (and columns) to 13. This will
* mean that for 14-row devices we will only be able to use
* half of the memory, but it's better than nothing.
*/
if (rows > 13)
rows = 13;
if (columns > 13)
columns = 13;
pDramInfo->size =
((1 << (rows + columns)) * pDramInfo->width);
pDramInfo->size *= pDramInfo->banks;
pDramInfo->size >>= 3;
/* figure out which addr_mux configurations will support this device */
muxmask &= checkMuxSetting (rows, columns);
if (muxmask == 0)
return 0;
buffered = pDramInfo->buffered;
bursts &= pDramInfo->bursts; /* union of all bursts */
if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
Trp = pDramInfo->Trp;
if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
Trcd = pDramInfo->Trcd;
prefresh = pIdx;
/* worst case (shortest) Refresh period */
if (refresh > prefresh[pDramInfo->refresh & 7])
refresh = prefresh[pDramInfo->refresh & 7];
} /* for loop */
/* We only allow a burst length of 8! */
if (!(bursts & 8))
bursts = 8;
/* Sort the devices. In order to get each chip select region
* aligned properly, put the biggest device at the lowest address.
* A simple bubble sort will do the trick.
*/
for (banknum = 0, pDramInfo = &DramInfo[0];
banknum < TOTAL_BANK; banknum++, pDramInfo++) {
int i;
for (i = 0; i < TOTAL_BANK; i++) {
if (pDramInfo->size < DramInfo[i].size &&
pDramInfo->ordinal < DramInfo[i].ordinal) {
/* If the current bank is smaller, but if the ordinal is also
* smaller, swap the ordinals
*/
u8 temp8;
temp8 = DramInfo[i].ordinal;
DramInfo[i].ordinal = pDramInfo->ordinal;
pDramInfo->ordinal = temp8;
}
}
}
/* Now figure out the base address for each bank. While
* we're at it, figure out how much memory there is.
*
*/
size = 0;
for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
int i;
for (i = 0; i < TOTAL_BANK; i++) {
if (DramInfo[i].ordinal == banknum
&& DramInfo[i].size != 0) {
DramInfo[i].base = size;
size += DramInfo[i].size;
}
}
}
/* Set up the Drive Strength register */
sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
/* ********************** Cfg 1 ************************* */
/* Set the single read to read/write/precharge delay */
cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
/* Set the single write to read/write/precharge delay.
* This may or may not be correct. The controller spec
* says "tWR", but "tWR" does not appear in the SPD. It
* always seems to be 15nsec for the class of device we're
* using, which turns out to be 2 clock cycles at 133MHz,
* so that's what we're going to use.
*
* HOWEVER, because of a bug in the controller, for DDR
* we need to set this to be the same as the value
* calculated for bwt2rwp.
*/
cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
/* Set the Read CAS latency. We're going to use a CL of
* 2.5 for DDR and 2 SDR.
*/
cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
/* Set the Active to Read/Write delay. This depends
* on Trcd which is reported as nanoseconds times 4.
* We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
* which gives us a dimensionless quantity. Play games with
* the divisions so we don't run out of dynamic ranges.
*/
/* account for megaherz and the times 4 */
temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
/* account for nanoseconds and round up, with a minimum value of 2 */
temp = ((temp + 999) / 1000) - 1;
if (temp < 2)
temp = 2;
cfg_value |= CFG1_ACT2WR (temp);
/* Set the precharge to active delay. This depends
* on Trp which is reported as nanoseconds times 4.
* We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
* which gives us a dimensionless quantity. Play games with
* the divisions so we don't run out of dynamic ranges.
*/
/* account for megaherz and the times 4 */
temp = (Trp * (gd->bus_clk / 1000000)) / 4;
/* account for nanoseconds and round up, then subtract 1, with a
* minumum value of 1 and a maximum value of 7.
*/
temp = (((temp + 999) / 1000) - 1) & 7;
if (temp < 1)
temp = 1;
cfg_value |= CFG1_PRE2ACT (temp);
/* Set refresh to active delay. This depends
* on Trfc which is not reported in the SPD.
* We'll use a nominal value of 75nsec which is
* what the controller spec uses.
*/
temp = (75 * (gd->bus_clk / 1000000));
/* account for nanoseconds and round up, then subtract 1 */
cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
/* Set the write latency, using the values given in the controller spec */
cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
memctl->cfg1 = cfg_value; /* cfg 1 */
asm volatile ("sync");
/* ********************** Cfg 2 ************************* */
/* Set the burst read to read/precharge delay */
cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
/* Set the burst write to read/precharge delay. Semi-magic numbers
* based on the controller spec recommendations, assuming tWR is
* two clock cycles.
*/
cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
/* Set the Burst read to write delay. Semi-magic numbers
* based on the DRAM controller documentation.
*/
cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
/* Set the burst length -- must be 8!! Well, 7, actually, becuase
* it's burst lenght minus 1.
*/
cfg_value |= CFG2_BURSTLEN (7);
memctl->cfg2 = cfg_value; /* cfg 2 */
asm volatile ("sync");
/* ********************** mode ************************* */
/* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
* disable automatic refresh.
*/
cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
/* Set the address mux based on whichever setting(s) is/are common
* to all the devices we have. If there is more than one, choose
* one arbitrarily.
*/
if (muxmask & 0x4)
cfg_value |= CTL_ADDRMUX (2);
else if (muxmask & 0x2)
cfg_value |= CTL_ADDRMUX (1);
else
cfg_value |= CTL_ADDRMUX (0);
/* Set the refresh interval. */
temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
cfg_value |= CTL_REFRESH_INTERVAL (temp);
/* Set buffered/non-buffered memory */
if (buffered)
cfg_value |= CTL_BUFFERED;
memctl->ctrl = cfg_value; /* ctrl */
asm volatile ("sync");
if (type == TYPE_DDR) {
/* issue precharge all */
temp = cfg_value | CTL_PRECHARGE_CMD;
memctl->ctrl = temp; /* ctrl */
asm volatile ("sync");
}
/* Set up mode value for CAS latency */
#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
#else
mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
#endif
asm volatile ("sync");
/* Write Extended Mode - enable DLL */
if (type == TYPE_DDR) {
temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
MODE_X_DS_NORMAL | MODE_CMD;
memctl->mode = (temp >> 16); /* mode */
asm volatile ("sync");
/* Write Mode - reset DLL, set CAS latency */
temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
memctl->mode = (temp >> 16); /* mode */
asm volatile ("sync");
}
/* Program the chip selects. */
for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
if (DramInfo[banknum].size != 0) {
u32 mask;
int i;
for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
if (DramInfo[banknum].size & mask)
break;
}
temp = (DramInfo[banknum].base & 0xfff00000) | (i -
1);
sysconf->cscfg[banknum] = temp;
asm volatile ("sync");
}
}
/* Wait for DLL lock */
udelay (200);
temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
memctl->ctrl = temp; /* ctrl */
asm volatile ("sync");
temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
memctl->ctrl = temp; /* ctrl */
asm volatile ("sync");
memctl->ctrl = temp; /* ctrl */
asm volatile ("sync");
/* Write Mode - DLL normal */
temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
memctl->mode = (temp >> 16); /* mode */
asm volatile ("sync");
/* Enable refresh, enable DQS's (if DDR), and lock the control register */
cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
if (type == TYPE_DDR)
cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
memctl->ctrl = cfg_value; /* ctrl */
asm volatile ("sync");
return size;
}