upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
96 lines
2.0 KiB
96 lines
2.0 KiB
/dts-v1/;
|
|
|
|
/*
|
|
* (Bogus) example FIT image description file demonstrating the usage
|
|
* of multiple images loaded by the SPL.
|
|
* Several binaries will be loaded at their respective load addresses.
|
|
*
|
|
* For booting U-Boot, "firmware" is searched first. If not found, "loadables"
|
|
* is used to identify images to be loaded into memory. If falcon boot is
|
|
* enabled, "kernel" is searched first. If not found, it falls back to the
|
|
* same flow as booting U-Boot. Changing image type will result skipping
|
|
* specific image.
|
|
*
|
|
* Finally the one image specifying an entry point will be entered by the SPL.
|
|
*/
|
|
|
|
/ {
|
|
description = "multiple firmware blobs and U-Boot, loaded by SPL";
|
|
#address-cells = <0x1>;
|
|
|
|
images {
|
|
|
|
uboot {
|
|
description = "U-Boot (64-bit)";
|
|
type = "standalone";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x4a000000>;
|
|
};
|
|
|
|
atf {
|
|
description = "ARM Trusted Firmware";
|
|
type = "firmware";
|
|
arch = "arm64";
|
|
compression = "none";
|
|
load = <0x18000>;
|
|
entry = <0x18000>;
|
|
};
|
|
|
|
mgmt-firmware {
|
|
description = "arisc management processor firmware";
|
|
type = "firmware";
|
|
arch = "or1k";
|
|
compression = "none";
|
|
load = <0x40000>;
|
|
};
|
|
|
|
fdt-1 {
|
|
description = "Pine64+ DT";
|
|
type = "flat_dt";
|
|
compression = "none";
|
|
load = <0x4fa00000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
fdt-2 {
|
|
description = "Pine64 DT";
|
|
type = "flat_dt";
|
|
compression = "none";
|
|
load = <0x4fa00000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
kernel {
|
|
description = "4.7-rc5 kernel";
|
|
type = "kernel";
|
|
compression = "none";
|
|
load = <0x40080000>;
|
|
arch = "arm64";
|
|
};
|
|
|
|
initrd {
|
|
description = "Debian installer initrd";
|
|
type = "ramdisk";
|
|
compression = "none";
|
|
load = <0x4fe00000>;
|
|
arch = "arm64";
|
|
};
|
|
};
|
|
|
|
configurations {
|
|
default = "config-1";
|
|
|
|
config-1 {
|
|
description = "sun50i-a64-pine64-plus";
|
|
loadables = "uboot", "atf", "kernel", "initrd";
|
|
fdt = "fdt-1";
|
|
};
|
|
|
|
config-2 {
|
|
description = "sun50i-a64-pine64";
|
|
loadables = "uboot", "atf", "mgmt-firmware";
|
|
fdt = "fdt-2";
|
|
};
|
|
};
|
|
};
|
|
|