upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/whistler.h

97 lines
2.7 KiB

/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
#include "tegra20-common.h"
/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Whistler) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_UAA_UAB
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */
#define CONFIG_TEGRA_I2C
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 4
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_FS_EXT4
#define CONFIG_FS_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
/*
* Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
* the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
* they didn't, the boot sector layout may be different. However, use of that
* particular card is standard practice as far as I know.
*/
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#include "tegra-common-post.h"
#endif /* __CONFIG_H */