upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
201 lines
4.6 KiB
201 lines
4.6 KiB
/*
|
|
* Copyright (C) 2014 Roman Byshko
|
|
*
|
|
* Roman Byshko <rbyshko@gmail.com>
|
|
*
|
|
* Based on code from
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include "ehci.h"
|
|
|
|
#define SUNXI_USB1_IO_BASE 0x01c14000
|
|
#define SUNXI_USB2_IO_BASE 0x01c1c000
|
|
|
|
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
|
|
#define SUNXI_USB_CSR 0x01c13404
|
|
#define SUNXI_USB_PASSBY_EN 1
|
|
|
|
#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
|
|
#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
|
|
#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
|
|
#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
|
|
|
|
static struct sunxi_ehci_hcd {
|
|
struct usb_hcd *hcd;
|
|
int usb_rst_mask;
|
|
int ahb_clk_mask;
|
|
int gpio_vbus;
|
|
void *csr;
|
|
int irq;
|
|
int id;
|
|
} sunxi_echi_hcd[] = {
|
|
{
|
|
.usb_rst_mask = CCM_USB_CTRL_PHY1_RST,
|
|
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
|
|
.gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO,
|
|
.csr = (void *)SUNXI_USB_CSR,
|
|
.irq = 39,
|
|
.id = 1,
|
|
},
|
|
#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
|
|
{
|
|
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST,
|
|
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
|
|
.gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO,
|
|
.csr = (void *)SUNXI_USB_CSR,
|
|
.irq = 40,
|
|
.id = 2,
|
|
}
|
|
#endif
|
|
};
|
|
|
|
static int enabled_hcd_count;
|
|
|
|
static void *get_io_base(int hcd_id)
|
|
{
|
|
if (hcd_id == 1)
|
|
return (void *)SUNXI_USB1_IO_BASE;
|
|
else if (hcd_id == 2)
|
|
return (void *)SUNXI_USB2_IO_BASE;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr,
|
|
int data, int len)
|
|
{
|
|
int j = 0, usbc_bit = 0;
|
|
void *dest = sunxi_ehci->csr;
|
|
|
|
usbc_bit = 1 << (sunxi_ehci->id * 2);
|
|
for (j = 0; j < len; j++) {
|
|
/* set the bit address to be written */
|
|
clrbits_le32(dest, 0xff << 8);
|
|
setbits_le32(dest, (addr + j) << 8);
|
|
|
|
clrbits_le32(dest, usbc_bit);
|
|
/* set data bit */
|
|
if (data & 0x1)
|
|
setbits_le32(dest, 1 << 7);
|
|
else
|
|
clrbits_le32(dest, 1 << 7);
|
|
|
|
setbits_le32(dest, usbc_bit);
|
|
|
|
clrbits_le32(dest, usbc_bit);
|
|
|
|
data >>= 1;
|
|
}
|
|
}
|
|
|
|
static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci)
|
|
{
|
|
/* The following comments are machine
|
|
* translated from Chinese, you have been warned!
|
|
*/
|
|
|
|
/* adjust PHY's magnitude and rate */
|
|
usb_phy_write(sunxi_ehci, 0x20, 0x14, 5);
|
|
|
|
/* threshold adjustment disconnect */
|
|
#ifdef CONFIG_SUN4I
|
|
usb_phy_write(sunxi_ehci, 0x2a, 3, 2);
|
|
#else
|
|
usb_phy_write(sunxi_ehci, 0x2a, 2, 2);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
|
|
static void sunxi_usb_passby(struct sunxi_ehci_hcd *sunxi_ehci, int enable)
|
|
{
|
|
unsigned long bits = 0;
|
|
void *addr = get_io_base(sunxi_ehci->id) + SUNXI_USB_PMU_IRQ_ENABLE;
|
|
|
|
bits = SUNXI_EHCI_AHB_ICHR8_EN |
|
|
SUNXI_EHCI_AHB_INCR4_BURST_EN |
|
|
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
|
|
SUNXI_EHCI_ULPI_BYPASS_EN;
|
|
|
|
if (enable)
|
|
setbits_le32(addr, bits);
|
|
else
|
|
clrbits_le32(addr, bits);
|
|
|
|
return;
|
|
}
|
|
|
|
static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
|
|
setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
|
|
|
|
sunxi_usb_phy_init(sunxi_ehci);
|
|
|
|
sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN);
|
|
|
|
gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
|
|
}
|
|
|
|
static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
|
|
|
|
sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN);
|
|
|
|
clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
|
|
clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
|
|
}
|
|
|
|
int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
|
|
struct ehci_hcor **hcor)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
|
|
|
|
/* enable common PHY only once */
|
|
if (index == 0)
|
|
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
|
|
|
|
sunxi_ehci_enable(sunxi_ehci);
|
|
|
|
*hccr = get_io_base(sunxi_ehci->id);
|
|
|
|
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
|
|
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
|
|
debug("sunxi-ehci: init hccr %x and hcor %x hc_length %d\n",
|
|
(uint32_t)*hccr, (uint32_t)*hcor,
|
|
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
|
|
enabled_hcd_count++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
|
|
|
|
sunxi_ehci_disable(sunxi_ehci);
|
|
|
|
/* disable common PHY only once, for the last enabled hcd */
|
|
if (enabled_hcd_count == 1)
|
|
clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
|
|
|
|
enabled_hcd_count--;
|
|
|
|
return 0;
|
|
}
|
|
|