upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
944 lines
25 KiB
944 lines
25 KiB
/*
|
|
* Machine Specific Values for SMDK5250 board based on EXYNOS5
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _SMDK5250_SETUP_H
|
|
#define _SMDK5250_SETUP_H
|
|
|
|
#include <config.h>
|
|
#include <asm/arch/dmc.h>
|
|
|
|
#define NOT_AVAILABLE 0
|
|
#define DATA_MASK 0xFFFFF
|
|
|
|
#define ENABLE_BIT 0x1
|
|
#define DISABLE_BIT 0x0
|
|
#define CA_SWAP_EN (1 << 0)
|
|
|
|
/* Set PLL */
|
|
#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
|
|
|
|
/* MEMCONTROL register bit fields */
|
|
#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0)
|
|
#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1)
|
|
#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2)
|
|
#define DMC_MEMCONTROL_TP_DISABLE (0 << 4)
|
|
#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5)
|
|
#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5)
|
|
#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6)
|
|
|
|
#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8)
|
|
#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8)
|
|
#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8)
|
|
|
|
#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12)
|
|
|
|
#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16)
|
|
#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16)
|
|
|
|
#define DMC_MEMCONTROL_BL_8 (3 << 20)
|
|
#define DMC_MEMCONTROL_BL_4 (2 << 20)
|
|
|
|
#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24)
|
|
|
|
#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25)
|
|
#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25)
|
|
#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25)
|
|
#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)
|
|
|
|
/* MEMCONFIG0 register bit fields */
|
|
#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
|
|
#define DMC_MEMCONFIG_CHIP_MAP_SPLIT (2 << 12)
|
|
#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
|
|
#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
|
|
#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
|
|
#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0)
|
|
|
|
#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16)
|
|
#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0)
|
|
#define DMC_MEMBASECONFIG_VAL(x) ( \
|
|
DMC_MEMBASECONFIGX_CHIP_BASE(x) | \
|
|
DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
|
|
)
|
|
|
|
/*
|
|
* As we use channel interleaving, therefore value of the base address
|
|
* register must be set as half of the bus base address
|
|
* RAM start addess is 0x2000_0000 which means chip_base is 0x20, so
|
|
* we need to set half 0x10 to the membaseconfigx registers
|
|
* see exynos5420 UM section 17.17.3.21 for more.
|
|
*/
|
|
#define DMC_CHIP_BASE_0 0x10
|
|
#define DMC_CHIP_BASE_1 0x50
|
|
#define DMC_CHIP_MASK 0x7C0
|
|
|
|
#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
|
|
#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80)
|
|
|
|
#define DMC_PRECHCONFIG_VAL 0xFF000000
|
|
#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF
|
|
|
|
#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000
|
|
#define DFI_INIT_START (1 << 28)
|
|
#define EMPTY (1 << 8)
|
|
#define AREF_EN (1 << 5)
|
|
|
|
#define DFI_INIT_COMPLETE_CHO (1 << 2)
|
|
#define DFI_INIT_COMPLETE_CH1 (1 << 3)
|
|
|
|
#define RDLVL_COMPLETE_CHO (1 << 14)
|
|
#define RDLVL_COMPLETE_CH1 (1 << 15)
|
|
|
|
#define CLK_STOP_EN (1 << 0)
|
|
#define DPWRDN_EN (1 << 1)
|
|
#define DSREF_EN (1 << 5)
|
|
|
|
/* COJCONTROL register bit fields */
|
|
#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3)
|
|
#define DMC_CONCONTROL_IO_PD_CON_ENABLE (1 << 3)
|
|
#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5)
|
|
#define DMC_CONCONTROL_AREF_EN_ENABLE (1 << 5)
|
|
#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8)
|
|
#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8)
|
|
#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12)
|
|
#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16)
|
|
#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28)
|
|
|
|
#define DMC_CONCONTROL_VAL 0x1FFF2101
|
|
|
|
#define DREX_CONCONTROL_VAL DMC_CONCONTROL_VAL \
|
|
| DMC_CONCONTROL_AREF_EN_ENABLE \
|
|
| DMC_CONCONTROL_IO_PD_CON_ENABLE
|
|
|
|
#define DMC_CONCONTROL_IO_PD_CON(x) (x << 6)
|
|
|
|
/* CLK_DIV_CPU1 */
|
|
#define HPM_RATIO 0x2
|
|
#define COPY_RATIO 0x0
|
|
|
|
/* CLK_DIV_CPU1 = 0x00000003 */
|
|
#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \
|
|
| (COPY_RATIO))
|
|
|
|
/* CLK_SRC_CORE0 */
|
|
#define CLK_SRC_CORE0_VAL 0x00000000
|
|
|
|
/* CLK_SRC_CORE1 */
|
|
#define CLK_SRC_CORE1_VAL 0x100
|
|
|
|
/* CLK_DIV_CORE0 */
|
|
#define CLK_DIV_CORE0_VAL 0x00120000
|
|
|
|
/* CLK_DIV_CORE1 */
|
|
#define CLK_DIV_CORE1_VAL 0x07070700
|
|
|
|
/* CLK_DIV_SYSRGT */
|
|
#define CLK_DIV_SYSRGT_VAL 0x00000111
|
|
|
|
/* CLK_DIV_ACP */
|
|
#define CLK_DIV_ACP_VAL 0x12
|
|
|
|
/* CLK_DIV_SYSLFT */
|
|
#define CLK_DIV_SYSLFT_VAL 0x00000311
|
|
|
|
#define MUX_APLL_SEL_MASK (1 << 0)
|
|
#define MUX_MPLL_SEL_MASK (1 << 8)
|
|
#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8)
|
|
#define MUX_CPLL_SEL_MASK (1 << 8)
|
|
#define MUX_EPLL_SEL_MASK (1 << 12)
|
|
#define MUX_VPLL_SEL_MASK (1 << 16)
|
|
#define MUX_GPLL_SEL_MASK (1 << 28)
|
|
#define MUX_BPLL_SEL_MASK (1 << 0)
|
|
#define MUX_HPM_SEL_MASK (1 << 20)
|
|
#define HPM_SEL_SCLK_MPLL (1 << 21)
|
|
#define PLL_LOCKED (1 << 29)
|
|
#define APLL_CON0_LOCKED (1 << 29)
|
|
#define MPLL_CON0_LOCKED (1 << 29)
|
|
#define BPLL_CON0_LOCKED (1 << 29)
|
|
#define CPLL_CON0_LOCKED (1 << 29)
|
|
#define EPLL_CON0_LOCKED (1 << 29)
|
|
#define GPLL_CON0_LOCKED (1 << 29)
|
|
#define VPLL_CON0_LOCKED (1 << 29)
|
|
#define CLK_REG_DISABLE 0x0
|
|
#define TOP2_VAL 0x0110000
|
|
|
|
/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
|
|
#define SPI0_ISP_SEL 6
|
|
#define SPI1_ISP_SEL 6
|
|
#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \
|
|
| (SPI0_ISP_SEL << 0)
|
|
|
|
/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
|
|
#define SPI0_ISP_RATIO 0xf
|
|
#define SPI1_ISP_RATIO 0xf
|
|
#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \
|
|
| (SPI0_ISP_RATIO << 0)
|
|
|
|
/* CLK_DIV_FSYS2 */
|
|
#define MMC2_RATIO_MASK 0xf
|
|
#define MMC2_RATIO_VAL 0x3
|
|
#define MMC2_RATIO_OFFSET 0
|
|
|
|
#define MMC2_PRE_RATIO_MASK 0xff
|
|
#define MMC2_PRE_RATIO_VAL 0x9
|
|
#define MMC2_PRE_RATIO_OFFSET 8
|
|
|
|
#define MMC3_RATIO_MASK 0xf
|
|
#define MMC3_RATIO_VAL 0x1
|
|
#define MMC3_RATIO_OFFSET 16
|
|
|
|
#define MMC3_PRE_RATIO_MASK 0xff
|
|
#define MMC3_PRE_RATIO_VAL 0x0
|
|
#define MMC3_PRE_RATIO_OFFSET 24
|
|
|
|
/* CLK_SRC_LEX */
|
|
#define CLK_SRC_LEX_VAL 0x0
|
|
|
|
/* CLK_DIV_LEX */
|
|
#define CLK_DIV_LEX_VAL 0x10
|
|
|
|
/* CLK_DIV_R0X */
|
|
#define CLK_DIV_R0X_VAL 0x10
|
|
|
|
/* CLK_DIV_L0X */
|
|
#define CLK_DIV_R1X_VAL 0x10
|
|
|
|
/* CLK_DIV_ISP2 */
|
|
#define CLK_DIV_ISP2_VAL 0x1
|
|
|
|
/* CLK_SRC_KFC */
|
|
#define SRC_KFC_HPM_SEL (1 << 15)
|
|
|
|
/* CLK_SRC_KFC */
|
|
#define CLK_SRC_KFC_VAL 0x00008001
|
|
|
|
/* CLK_DIV_KFC */
|
|
#define CLK_DIV_KFC_VAL 0x03300110
|
|
|
|
/* CLK_DIV2_RATIO */
|
|
#define CLK_DIV2_RATIO 0x10111150
|
|
|
|
/* CLK_DIV4_RATIO */
|
|
#define CLK_DIV4_RATIO 0x00000003
|
|
|
|
/* CLK_DIV_G2D */
|
|
#define CLK_DIV_G2D 0x00000010
|
|
|
|
/*
|
|
* DIV_DISP1_0
|
|
* For DP, divisor should be 2
|
|
*/
|
|
#define CLK_DIV_DISP1_0_FIMD1 (2 << 0)
|
|
|
|
/* CLK_GATE_IP_DISP1 */
|
|
#define CLK_GATE_DP1_ALLOW (1 << 4)
|
|
|
|
/* AUDIO CLK SEL */
|
|
#define AUDIO0_SEL_EPLL (0x6 << 28)
|
|
#define AUDIO0_RATIO 0x5
|
|
#define PCM0_RATIO 0x3
|
|
#define DIV_MAU_VAL (PCM0_RATIO << 24 | AUDIO0_RATIO << 20)
|
|
|
|
/* CLK_SRC_CDREX */
|
|
#define MUX_MCLK_CDR_MSPLL (1 << 4)
|
|
#define MUX_BPLL_SEL_FOUTBPLL (1 << 0)
|
|
#define BPLL_SEL_MASK 0x7
|
|
#define FOUTBPLL 2
|
|
|
|
#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
|
|
#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
|
|
|
|
#define PHY_CON0_RESET_VAL 0x17020a40
|
|
#define P0_CMD_EN (1 << 14)
|
|
#define BYTE_RDLVL_EN (1 << 13)
|
|
#define CTRL_SHGATE (1 << 8)
|
|
|
|
#define PHY_CON1_RESET_VAL 0x09210100
|
|
#define RDLVL_PASS_ADJ_VAL 0x6
|
|
#define RDLVL_PASS_ADJ_OFFSET 16
|
|
#define CTRL_GATEDURADJ_MASK (0xf << 20)
|
|
#define READ_LEVELLING_DDR3 0x0100
|
|
|
|
#define PHY_CON2_RESET_VAL 0x00010004
|
|
#define INIT_DESKEW_EN (1 << 6)
|
|
#define DLL_DESKEW_EN (1 << 12)
|
|
#define RDLVL_GATE_EN (1 << 24)
|
|
#define RDLVL_EN (1 << 25)
|
|
#define RDLVL_INCR_ADJ (0x1 << 16)
|
|
|
|
/* DREX_PAUSE */
|
|
#define DREX_PAUSE_EN (1 << 0)
|
|
|
|
#define BYPASS_EN (1 << 22)
|
|
|
|
/* MEMMORY VAL */
|
|
#define PHY_CON0_VAL 0x17021A00
|
|
|
|
#define PHY_CON12_RESET_VAL 0x10100070
|
|
#define PHY_CON12_VAL 0x10107F50
|
|
#define CTRL_START (1 << 6)
|
|
#define CTRL_DLL_ON (1 << 5)
|
|
#define CTRL_LOCK_COARSE_OFFSET 10
|
|
#define CTRL_LOCK_COARSE_MASK (0x7F << CTRL_LOCK_COARSE_OFFSET)
|
|
#define CTRL_LOCK_COARSE(x) (((x) & CTRL_LOCK_COARSE_MASK) >> \
|
|
CTRL_LOCK_COARSE_OFFSET)
|
|
#define CTRL_FORCE_MASK (0x7F << 8)
|
|
#define CTRL_FINE_LOCKED 0x7
|
|
|
|
#define CTRL_OFFSETD_RESET_VAL 0x8
|
|
#define CTRL_OFFSETD_VAL 0x7F
|
|
|
|
#define CTRL_OFFSETR0 0x7F
|
|
#define CTRL_OFFSETR1 0x7F
|
|
#define CTRL_OFFSETR2 0x7F
|
|
#define CTRL_OFFSETR3 0x7F
|
|
#define PHY_CON4_VAL (CTRL_OFFSETR0 << 0 | \
|
|
CTRL_OFFSETR1 << 8 | \
|
|
CTRL_OFFSETR2 << 16 | \
|
|
CTRL_OFFSETR3 << 24)
|
|
#define PHY_CON4_RESET_VAL 0x08080808
|
|
|
|
#define CTRL_OFFSETW0 0x7F
|
|
#define CTRL_OFFSETW1 0x7F
|
|
#define CTRL_OFFSETW2 0x7F
|
|
#define CTRL_OFFSETW3 0x7F
|
|
#define PHY_CON6_VAL (CTRL_OFFSETW0 << 0 | \
|
|
CTRL_OFFSETW1 << 8 | \
|
|
CTRL_OFFSETW2 << 16 | \
|
|
CTRL_OFFSETW3 << 24)
|
|
#define PHY_CON6_RESET_VAL 0x08080808
|
|
|
|
#define PHY_CON14_RESET_VAL 0x001F0000
|
|
#define CTRL_PULLD_DQS 0xF
|
|
#define CTRL_PULLD_DQS_OFFSET 0
|
|
|
|
/* ZQ Configurations */
|
|
#define PHY_CON16_RESET_VAL 0x08000304
|
|
|
|
#define ZQ_CLK_EN (1 << 27)
|
|
#define ZQ_CLK_DIV_EN (1 << 18)
|
|
#define ZQ_MANUAL_STR (1 << 1)
|
|
#define ZQ_DONE (1 << 0)
|
|
#define ZQ_MODE_DDS_OFFSET 24
|
|
|
|
#define CTRL_RDLVL_GATE_ENABLE 1
|
|
#define CTRL_RDLVL_GATE_DISABLE 0
|
|
#define CTRL_RDLVL_DATA_ENABLE 2
|
|
|
|
/* Direct Command */
|
|
#define DIRECT_CMD_NOP 0x07000000
|
|
#define DIRECT_CMD_PALL 0x01000000
|
|
#define DIRECT_CMD_ZQINIT 0x0a000000
|
|
#define DIRECT_CMD_CHANNEL_SHIFT 28
|
|
#define DIRECT_CMD_CHIP_SHIFT 20
|
|
#define DIRECT_CMD_BANK_SHIFT 16
|
|
#define DIRECT_CMD_REFA (5 << 24)
|
|
#define DIRECT_CMD_MRS1 0x71C00
|
|
#define DIRECT_CMD_MRS2 0x10BFC
|
|
#define DIRECT_CMD_MRS3 0x0050C
|
|
#define DIRECT_CMD_MRS4 0x00868
|
|
#define DIRECT_CMD_MRS5 0x00C04
|
|
|
|
/* Drive Strength */
|
|
#define IMPEDANCE_48_OHM 4
|
|
#define IMPEDANCE_40_OHM 5
|
|
#define IMPEDANCE_34_OHM 6
|
|
#define IMPEDANCE_30_OHM 7
|
|
#define PHY_CON39_VAL_48_OHM 0x09240924
|
|
#define PHY_CON39_VAL_40_OHM 0x0B6D0B6D
|
|
#define PHY_CON39_VAL_34_OHM 0x0DB60DB6
|
|
#define PHY_CON39_VAL_30_OHM 0x0FFF0FFF
|
|
|
|
#define CTRL_BSTLEN_OFFSET 8
|
|
#define CTRL_RDLAT_OFFSET 0
|
|
|
|
#define CMD_DEFAULT_LPDDR3 0xF
|
|
#define CMD_DEFUALT_OFFSET 0
|
|
#define T_WRDATA_EN 0x7
|
|
#define T_WRDATA_EN_DDR3 0x8
|
|
#define T_WRDATA_EN_OFFSET 16
|
|
#define T_WRDATA_EN_MASK 0x1f
|
|
|
|
#define PHY_CON31_VAL 0x0C183060
|
|
#define PHY_CON32_VAL 0x60C18306
|
|
#define PHY_CON33_VAL 0x00000030
|
|
|
|
#define PHY_CON31_RESET_VAL 0x0
|
|
#define PHY_CON32_RESET_VAL 0x0
|
|
#define PHY_CON33_RESET_VAL 0x0
|
|
|
|
#define SL_DLL_DYN_CON_EN (1 << 1)
|
|
#define FP_RESYNC (1 << 3)
|
|
#define CTRL_START (1 << 6)
|
|
|
|
#define DMC_AREF_EN (1 << 5)
|
|
#define DMC_CONCONTROL_EMPTY (1 << 8)
|
|
#define DFI_INIT_START (1 << 28)
|
|
|
|
#define DMC_MEMCONTROL_VAL 0x00312700
|
|
#define CLK_STOP_EN (1 << 0)
|
|
#define DPWRDN_EN (1 << 1)
|
|
#define DSREF_EN (1 << 5)
|
|
|
|
#define MEMBASECONFIG_CHIP_MASK_VAL 0x7E0
|
|
#define MEMBASECONFIG_CHIP_MASK_OFFSET 0
|
|
#define MEMBASECONFIG0_CHIP_BASE_VAL 0x20
|
|
#define MEMBASECONFIG1_CHIP_BASE_VAL 0x40
|
|
#define CHIP_BASE_OFFSET 16
|
|
|
|
#define MEMCONFIG_VAL 0x1323
|
|
#define PRECHCONFIG_DEFAULT_VAL 0xFF000000
|
|
#define PWRDNCONFIG_DEFAULT_VAL 0xFFFF00FF
|
|
|
|
#define TIMINGAREF_VAL 0x5d
|
|
#define TIMINGROW_VAL 0x345A8692
|
|
#define TIMINGDATA_VAL 0x3630065C
|
|
#define TIMINGPOWER_VAL 0x50380336
|
|
#define DFI_INIT_COMPLETE (1 << 3)
|
|
|
|
#define BRBRSVCONTROL_VAL 0x00000033
|
|
#define BRBRSVCONFIG_VAL 0x88778877
|
|
|
|
/* Clock Gating Control (CGCONTROL) register */
|
|
#define MEMIF_CG_EN (1 << 3) /* Memory interface clock gating */
|
|
#define SCG_CG_EN (1 << 2) /* Scheduler clock gating */
|
|
#define BUSIF_WR_CG_EN (1 << 1) /* Bus interface write channel clock gating */
|
|
#define BUSIF_RD_CG_EN (1 << 0) /* Bus interface read channel clock gating */
|
|
#define DMC_INTERNAL_CG (MEMIF_CG_EN | SCG_CG_EN | \
|
|
BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
|
|
|
|
/* DMC PHY Control0 register */
|
|
#define PHY_CONTROL0_RESET_VAL 0x0
|
|
#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
|
|
#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */
|
|
#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */
|
|
#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */
|
|
|
|
/* Driver strength for CK, CKE, CS & CA */
|
|
#define IMP_OUTPUT_DRV_40_OHM 0x5
|
|
#define IMP_OUTPUT_DRV_30_OHM 0x7
|
|
#define DA_3_DS_OFFSET 25
|
|
#define DA_2_DS_OFFSET 22
|
|
#define DA_1_DS_OFFSET 19
|
|
#define DA_0_DS_OFFSET 16
|
|
#define CA_CK_DRVR_DS_OFFSET 9
|
|
#define CA_CKE_DRVR_DS_OFFSET 6
|
|
#define CA_CS_DRVR_DS_OFFSET 3
|
|
#define CA_ADR_DRVR_DS_OFFSET 0
|
|
|
|
#define PHY_CON42_CTRL_BSTLEN_SHIFT 8
|
|
#define PHY_CON42_CTRL_RDLAT_SHIFT 0
|
|
|
|
/*
|
|
* Definitions that differ with SoC's.
|
|
* Below is the part defining macros for Exynos5250.
|
|
* Else part introduces macros for Exynos5420.
|
|
*/
|
|
#ifndef CONFIG_EXYNOS5420
|
|
|
|
/* APLL_CON1 */
|
|
#define APLL_CON1_VAL (0x00203800)
|
|
|
|
/* MPLL_CON1 */
|
|
#define MPLL_CON1_VAL (0x00203800)
|
|
|
|
/* CPLL_CON1 */
|
|
#define CPLL_CON1_VAL (0x00203800)
|
|
|
|
/* DPLL_CON1 */
|
|
#define DPLL_CON1_VAL (NOT_AVAILABLE)
|
|
|
|
/* GPLL_CON1 */
|
|
#define GPLL_CON1_VAL (0x00203800)
|
|
|
|
/* EPLL_CON1, CON2 */
|
|
#define EPLL_CON1_VAL 0x00000000
|
|
#define EPLL_CON2_VAL 0x00000080
|
|
|
|
/* VPLL_CON1, CON2 */
|
|
#define VPLL_CON1_VAL 0x00000000
|
|
#define VPLL_CON2_VAL 0x00000080
|
|
|
|
/* RPLL_CON1, CON2 */
|
|
#define RPLL_CON1_VAL NOT_AVAILABLE
|
|
#define RPLL_CON2_VAL NOT_AVAILABLE
|
|
|
|
/* BPLL_CON1 */
|
|
#define BPLL_CON1_VAL 0x00203800
|
|
|
|
/* SPLL_CON1 */
|
|
#define SPLL_CON1_VAL NOT_AVAILABLE
|
|
|
|
/* IPLL_CON1 */
|
|
#define IPLL_CON1_VAL NOT_AVAILABLE
|
|
|
|
/* KPLL_CON1 */
|
|
#define KPLL_CON1_VAL NOT_AVAILABLE
|
|
|
|
/* CLK_SRC_ISP */
|
|
#define CLK_SRC_ISP_VAL NOT_AVAILABLE
|
|
#define CLK_DIV_ISP0_VAL 0x31
|
|
#define CLK_DIV_ISP1_VAL 0x0
|
|
|
|
/* CLK_FSYS */
|
|
#define CLK_SRC_FSYS0_VAL 0x66666
|
|
#define CLK_DIV_FSYS0_VAL 0x0BB00000
|
|
#define CLK_DIV_FSYS1_VAL NOT_AVAILABLE
|
|
#define CLK_DIV_FSYS2_VAL NOT_AVAILABLE
|
|
|
|
/* CLK_SRC_CPU */
|
|
/* 0 = MOUTAPLL, 1 = SCLKMPLL */
|
|
#define MUX_HPM_SEL 0
|
|
#define MUX_CPU_SEL 0
|
|
#define MUX_APLL_SEL 1
|
|
|
|
#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
|
|
| (MUX_CPU_SEL << 16) \
|
|
| (MUX_APLL_SEL))
|
|
|
|
/* CLK_SRC_CDREX */
|
|
#define CLK_SRC_CDREX_VAL 0x1
|
|
|
|
/* CLK_DIV_CDREX */
|
|
#define CLK_DIV_CDREX0_VAL NOT_AVAILABLE
|
|
#define CLK_DIV_CDREX1_VAL NOT_AVAILABLE
|
|
|
|
/* CLK_DIV_CPU0_VAL */
|
|
#define CLK_DIV_CPU0_VAL NOT_AVAILABLE
|
|
|
|
#define MCLK_CDREX2_RATIO 0x0
|
|
#define ACLK_EFCON_RATIO 0x1
|
|
#define MCLK_DPHY_RATIO 0x1
|
|
#define MCLK_CDREX_RATIO 0x1
|
|
#define ACLK_C2C_200_RATIO 0x1
|
|
#define C2C_CLK_400_RATIO 0x1
|
|
#define PCLK_CDREX_RATIO 0x1
|
|
#define ACLK_CDREX_RATIO 0x1
|
|
|
|
#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \
|
|
| (C2C_CLK_400_RATIO << 6) \
|
|
| (PCLK_CDREX_RATIO << 4) \
|
|
| (ACLK_CDREX_RATIO))
|
|
|
|
/* CLK_SRC_TOP0 */
|
|
#define MUX_ACLK_300_GSCL_SEL 0x0
|
|
#define MUX_ACLK_300_GSCL_MID_SEL 0x0
|
|
#define MUX_ACLK_400_G3D_MID_SEL 0x0
|
|
#define MUX_ACLK_333_SEL 0x0
|
|
#define MUX_ACLK_300_DISP1_SEL 0x0
|
|
#define MUX_ACLK_300_DISP1_MID_SEL 0x0
|
|
#define MUX_ACLK_200_SEL 0x0
|
|
#define MUX_ACLK_166_SEL 0x0
|
|
#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \
|
|
| (MUX_ACLK_300_GSCL_MID_SEL << 24) \
|
|
| (MUX_ACLK_400_G3D_MID_SEL << 20) \
|
|
| (MUX_ACLK_333_SEL << 16) \
|
|
| (MUX_ACLK_300_DISP1_SEL << 15) \
|
|
| (MUX_ACLK_300_DISP1_MID_SEL << 14) \
|
|
| (MUX_ACLK_200_SEL << 12) \
|
|
| (MUX_ACLK_166_SEL << 8))
|
|
|
|
/* CLK_SRC_TOP1 */
|
|
#define MUX_ACLK_400_G3D_SEL 0x1
|
|
#define MUX_ACLK_400_ISP_SEL 0x0
|
|
#define MUX_ACLK_400_IOP_SEL 0x0
|
|
#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0
|
|
#define MUX_ACLK_300_GSCL_MID1_SEL 0x0
|
|
#define MUX_ACLK_300_DISP1_MID1_SEL 0x0
|
|
#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \
|
|
|(MUX_ACLK_400_ISP_SEL << 24) \
|
|
|(MUX_ACLK_400_IOP_SEL << 20) \
|
|
|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \
|
|
|(MUX_ACLK_300_GSCL_MID1_SEL << 12) \
|
|
|(MUX_ACLK_300_DISP1_MID1_SEL << 8))
|
|
|
|
/* CLK_SRC_TOP2 */
|
|
#define MUX_GPLL_SEL 0x1
|
|
#define MUX_BPLL_USER_SEL 0x0
|
|
#define MUX_MPLL_USER_SEL 0x0
|
|
#define MUX_VPLL_SEL 0x1
|
|
#define MUX_EPLL_SEL 0x1
|
|
#define MUX_CPLL_SEL 0x1
|
|
#define VPLLSRC_SEL 0x0
|
|
#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \
|
|
| (MUX_BPLL_USER_SEL << 24) \
|
|
| (MUX_MPLL_USER_SEL << 20) \
|
|
| (MUX_VPLL_SEL << 16) \
|
|
| (MUX_EPLL_SEL << 12) \
|
|
| (MUX_CPLL_SEL << 8) \
|
|
| (VPLLSRC_SEL))
|
|
/* CLK_SRC_TOP3 */
|
|
#define MUX_ACLK_333_SUB_SEL 0x1
|
|
#define MUX_ACLK_400_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_ISP_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_GPS_SUB_SEL 0x0
|
|
#define MUX_ACLK_300_GSCL_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_GSCL_SUB_SEL 0x1
|
|
#define MUX_ACLK_300_DISP1_SUB_SEL 0x1
|
|
#define MUX_ACLK_200_DISP1_SUB_SEL 0x1
|
|
#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \
|
|
| (MUX_ACLK_400_SUB_SEL << 20) \
|
|
| (MUX_ACLK_266_ISP_SUB_SEL << 16) \
|
|
| (MUX_ACLK_266_GPS_SUB_SEL << 12) \
|
|
| (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
|
|
| (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
|
|
| (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
|
|
| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
|
|
|
|
#define CLK_SRC_TOP4_VAL NOT_AVAILABLE
|
|
#define CLK_SRC_TOP5_VAL NOT_AVAILABLE
|
|
#define CLK_SRC_TOP6_VAL NOT_AVAILABLE
|
|
#define CLK_SRC_TOP7_VAL NOT_AVAILABLE
|
|
|
|
/* CLK_DIV_TOP0 */
|
|
#define ACLK_300_DISP1_RATIO 0x2
|
|
#define ACLK_400_G3D_RATIO 0x0
|
|
#define ACLK_333_RATIO 0x0
|
|
#define ACLK_266_RATIO 0x2
|
|
#define ACLK_200_RATIO 0x3
|
|
#define ACLK_166_RATIO 0x1
|
|
#define ACLK_133_RATIO 0x1
|
|
#define ACLK_66_RATIO 0x5
|
|
|
|
#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \
|
|
| (ACLK_400_G3D_RATIO << 24) \
|
|
| (ACLK_333_RATIO << 20) \
|
|
| (ACLK_266_RATIO << 16) \
|
|
| (ACLK_200_RATIO << 12) \
|
|
| (ACLK_166_RATIO << 8) \
|
|
| (ACLK_133_RATIO << 4) \
|
|
| (ACLK_66_RATIO))
|
|
|
|
/* CLK_DIV_TOP1 */
|
|
#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3
|
|
#define ACLK_66_PRE_RATIO 0x1
|
|
#define ACLK_400_ISP_RATIO 0x1
|
|
#define ACLK_400_IOP_RATIO 0x1
|
|
#define ACLK_300_GSCL_RATIO 0x2
|
|
|
|
#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
|
|
| (ACLK_66_PRE_RATIO << 24) \
|
|
| (ACLK_400_ISP_RATIO << 20) \
|
|
| (ACLK_400_IOP_RATIO << 16) \
|
|
| (ACLK_300_GSCL_RATIO << 12))
|
|
|
|
#define CLK_DIV_TOP2_VAL NOT_AVAILABLE
|
|
|
|
/* PLL Lock Value Factor */
|
|
#define PLL_LOCK_FACTOR 250
|
|
#define PLL_X_LOCK_FACTOR 3000
|
|
|
|
/* CLK_SRC_PERIC0 */
|
|
#define PWM_SEL 6
|
|
#define UART3_SEL 6
|
|
#define UART2_SEL 6
|
|
#define UART1_SEL 6
|
|
#define UART0_SEL 6
|
|
/* SRC_CLOCK = SCLK_MPLL */
|
|
#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \
|
|
| (UART3_SEL << 12) \
|
|
| (UART2_SEL << 8) \
|
|
| (UART1_SEL << 4) \
|
|
| (UART0_SEL))
|
|
|
|
/* CLK_SRC_PERIC1 */
|
|
/* SRC_CLOCK = SCLK_MPLL */
|
|
#define SPI0_SEL 6
|
|
#define SPI1_SEL 6
|
|
#define SPI2_SEL 6
|
|
#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \
|
|
| (SPI1_SEL << 20) \
|
|
| (SPI0_SEL << 16))
|
|
|
|
/* CLK_DIV_PERIL0 */
|
|
#define UART5_RATIO 7
|
|
#define UART4_RATIO 7
|
|
#define UART3_RATIO 7
|
|
#define UART2_RATIO 7
|
|
#define UART1_RATIO 7
|
|
#define UART0_RATIO 7
|
|
|
|
#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \
|
|
| (UART2_RATIO << 8) \
|
|
| (UART1_RATIO << 4) \
|
|
| (UART0_RATIO))
|
|
/* CLK_DIV_PERIC1 */
|
|
#define SPI1_RATIO 0x7
|
|
#define SPI0_RATIO 0xf
|
|
#define SPI1_SUB_RATIO 0x0
|
|
#define SPI0_SUB_RATIO 0x0
|
|
#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \
|
|
| ((SPI1_RATIO << 16) \
|
|
| (SPI0_SUB_RATIO << 8) \
|
|
| (SPI0_RATIO << 0)))
|
|
|
|
/* CLK_DIV_PERIC2 */
|
|
#define SPI2_RATIO 0xf
|
|
#define SPI2_SUB_RATIO 0x0
|
|
#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \
|
|
| (SPI2_RATIO << 0))
|
|
|
|
/* CLK_DIV_PERIC3 */
|
|
#define PWM_RATIO 8
|
|
#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0)
|
|
|
|
|
|
/* CLK_DIV_PERIC4 */
|
|
#define CLK_DIV_PERIC4_VAL NOT_AVAILABLE
|
|
|
|
/* CLK_SRC_DISP1_0 */
|
|
#define CLK_SRC_DISP1_0_VAL 0x6
|
|
#define CLK_DIV_DISP1_0_VAL NOT_AVAILABLE
|
|
|
|
#define APLL_FOUT (1 << 0)
|
|
#define KPLL_FOUT NOT_AVAILABLE
|
|
|
|
#define CLK_DIV_CPERI1_VAL NOT_AVAILABLE
|
|
|
|
#else
|
|
#define PAD_RETENTION_DRAM_COREBLK_VAL 0x10000000
|
|
|
|
/* APLL_CON1 */
|
|
#define APLL_CON1_VAL (0x0020F300)
|
|
|
|
/* MPLL_CON1 */
|
|
#define MPLL_CON1_VAL (0x0020F300)
|
|
|
|
|
|
/* CPLL_CON1 */
|
|
#define CPLL_CON1_VAL 0x0020f300
|
|
|
|
/* DPLL_CON1 */
|
|
#define DPLL_CON1_VAL (0x0020F300)
|
|
|
|
/* GPLL_CON1 */
|
|
#define GPLL_CON1_VAL (NOT_AVAILABLE)
|
|
|
|
|
|
/* EPLL_CON1, CON2 */
|
|
#define EPLL_CON1_VAL 0x00000000
|
|
#define EPLL_CON2_VAL 0x00000080
|
|
|
|
/* VPLL_CON1, CON2 */
|
|
#define VPLL_CON1_VAL 0x0020f300
|
|
#define VPLL_CON2_VAL NOT_AVAILABLE
|
|
|
|
/* RPLL_CON1, CON2 */
|
|
#define RPLL_CON1_VAL 0x00000000
|
|
#define RPLL_CON2_VAL 0x00000080
|
|
|
|
/* BPLL_CON1 */
|
|
#define BPLL_CON1_VAL 0x0020f300
|
|
|
|
/* SPLL_CON1 */
|
|
#define SPLL_CON1_VAL 0x0020f300
|
|
|
|
/* IPLL_CON1 */
|
|
#define IPLL_CON1_VAL 0x00000080
|
|
|
|
/* KPLL_CON1 */
|
|
#define KPLL_CON1_VAL 0x200000
|
|
|
|
/* CLK_SRC_ISP */
|
|
#define CLK_SRC_ISP_VAL 0x33366000
|
|
#define CLK_DIV_ISP0_VAL 0x13131300
|
|
#define CLK_DIV_ISP1_VAL 0xbb110202
|
|
|
|
|
|
/* CLK_FSYS */
|
|
#define CLK_SRC_FSYS0_VAL 0x33033300
|
|
#define CLK_DIV_FSYS0_VAL 0x0
|
|
#define CLK_DIV_FSYS1_VAL 0x04f13c4f
|
|
#define CLK_DIV_FSYS2_VAL 0x041d0000
|
|
|
|
/* CLK_SRC_CPU */
|
|
/* 0 = MOUTAPLL, 1 = SCLKMPLL */
|
|
#define MUX_HPM_SEL 1
|
|
#define MUX_CPU_SEL 0
|
|
#define MUX_APLL_SEL 1
|
|
|
|
#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
|
|
| (MUX_CPU_SEL << 16) \
|
|
| (MUX_APLL_SEL))
|
|
|
|
/* CLK_SRC_CDREX */
|
|
#define CLK_SRC_CDREX_VAL 0x00000011
|
|
|
|
/* CLK_DIV_CDREX */
|
|
#define CLK_DIV_CDREX0_VAL 0x30010100
|
|
#define CLK_DIV_CDREX1_VAL 0x300
|
|
|
|
#define CLK_DIV_CDREX_VAL 0x17010100
|
|
|
|
/* CLK_DIV_CPU0_VAL */
|
|
#define CLK_DIV_CPU0_VAL 0x01440020
|
|
|
|
/* CLK_SRC_TOP */
|
|
#define CLK_SRC_TOP0_VAL 0x12221222
|
|
#define CLK_SRC_TOP1_VAL 0x00100200
|
|
#define CLK_SRC_TOP2_VAL 0x11101000
|
|
#define CLK_SRC_TOP3_VAL 0x11111111
|
|
#define CLK_SRC_TOP4_VAL 0x11110111
|
|
#define CLK_SRC_TOP5_VAL 0x11111101
|
|
#define CLK_SRC_TOP6_VAL 0x11110111
|
|
#define CLK_SRC_TOP7_VAL 0x00022200
|
|
|
|
/* CLK_DIV_TOP */
|
|
#define CLK_DIV_TOP0_VAL 0x23712311
|
|
#define CLK_DIV_TOP1_VAL 0x13100B00
|
|
#define CLK_DIV_TOP2_VAL 0x11101100
|
|
|
|
/* PLL Lock Value Factor */
|
|
#define PLL_LOCK_FACTOR 200
|
|
#define PLL_X_LOCK_FACTOR 3000
|
|
|
|
/* CLK_SRC_PERIC0 */
|
|
#define SPDIF_SEL 1
|
|
#define PWM_SEL 3
|
|
#define UART4_SEL 3
|
|
#define UART3_SEL 3
|
|
#define UART2_SEL 3
|
|
#define UART1_SEL 3
|
|
#define UART0_SEL 3
|
|
/* SRC_CLOCK = SCLK_RPLL */
|
|
#define CLK_SRC_PERIC0_VAL ((SPDIF_SEL << 28) \
|
|
| (PWM_SEL << 24) \
|
|
| (UART4_SEL << 20) \
|
|
| (UART3_SEL << 16) \
|
|
| (UART2_SEL << 12) \
|
|
| (UART1_SEL << 8) \
|
|
| (UART0_SEL << 4))
|
|
|
|
/* CLK_SRC_PERIC1 */
|
|
/* SRC_CLOCK = SCLK_EPLL */
|
|
#define SPI0_SEL 6
|
|
#define SPI1_SEL 6
|
|
#define SPI2_SEL 6
|
|
#define AUDIO0_SEL 6
|
|
#define AUDIO1_SEL 6
|
|
#define AUDIO2_SEL 6
|
|
#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 28) \
|
|
| (SPI1_SEL << 24) \
|
|
| (SPI0_SEL << 20) \
|
|
| (AUDIO2_SEL << 16) \
|
|
| (AUDIO2_SEL << 12) \
|
|
| (AUDIO2_SEL << 8))
|
|
|
|
/* CLK_DIV_PERIC0 */
|
|
#define PWM_RATIO 8
|
|
#define UART4_RATIO 9
|
|
#define UART3_RATIO 9
|
|
#define UART2_RATIO 9
|
|
#define UART1_RATIO 9
|
|
#define UART0_RATIO 9
|
|
|
|
#define CLK_DIV_PERIC0_VAL ((PWM_RATIO << 28) \
|
|
| (UART4_RATIO << 24) \
|
|
| (UART3_RATIO << 20) \
|
|
| (UART2_RATIO << 16) \
|
|
| (UART1_RATIO << 12) \
|
|
| (UART0_RATIO << 8))
|
|
/* CLK_DIV_PERIC1 */
|
|
#define SPI2_RATIO 0x1
|
|
#define SPI1_RATIO 0x1
|
|
#define SPI0_RATIO 0x1
|
|
#define CLK_DIV_PERIC1_VAL ((SPI2_RATIO << 28) \
|
|
| (SPI1_RATIO << 24) \
|
|
| (SPI0_RATIO << 20))
|
|
|
|
/* CLK_DIV_PERIC2 */
|
|
#define PCM2_RATIO 0x3
|
|
#define PCM1_RATIO 0x3
|
|
#define CLK_DIV_PERIC2_VAL ((PCM2_RATIO << 24) \
|
|
| (PCM1_RATIO << 16))
|
|
|
|
/* CLK_DIV_PERIC3 */
|
|
#define AUDIO2_RATIO 0x5
|
|
#define AUDIO1_RATIO 0x5
|
|
#define AUDIO0_RATIO 0x5
|
|
#define CLK_DIV_PERIC3_VAL ((AUDIO2_RATIO << 28) \
|
|
| (AUDIO1_RATIO << 24) \
|
|
| (AUDIO0_RATIO << 20))
|
|
|
|
/* CLK_DIV_PERIC4 */
|
|
#define SPI2_PRE_RATIO 0x2
|
|
#define SPI1_PRE_RATIO 0x2
|
|
#define SPI0_PRE_RATIO 0x2
|
|
#define CLK_DIV_PERIC4_VAL ((SPI2_PRE_RATIO << 24) \
|
|
| (SPI1_PRE_RATIO << 16) \
|
|
| (SPI0_PRE_RATIO << 8))
|
|
|
|
/* CLK_SRC_DISP1_0 */
|
|
#define CLK_SRC_DISP1_0_VAL 0x10666600
|
|
#define CLK_DIV_DISP1_0_VAL 0x01050211
|
|
|
|
#define APLL_FOUT (1 << 0)
|
|
#define KPLL_FOUT (1 << 0)
|
|
|
|
#define CLK_DIV_CPERI1_VAL 0x3f3f0000
|
|
#endif
|
|
|
|
struct mem_timings;
|
|
|
|
/* Errors that we can encourter in low-level setup */
|
|
enum {
|
|
SETUP_ERR_OK,
|
|
SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1,
|
|
SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2,
|
|
};
|
|
|
|
/*
|
|
* Memory variant specific initialization code for DDR3
|
|
*
|
|
* @param mem Memory timings for this memory type.
|
|
* @param reset Reset DDR PHY during initialization.
|
|
* @return 0 if ok, SETUP_ERR_... if there is a problem
|
|
*/
|
|
int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset);
|
|
|
|
/* Memory variant specific initialization code for LPDDR3 */
|
|
void lpddr3_mem_ctrl_init(void);
|
|
|
|
/*
|
|
* Configure ZQ I/O interface
|
|
*
|
|
* @param mem Memory timings for this memory type.
|
|
* @param phy0_con16 Register address for dmc_phy0->phy_con16
|
|
* @param phy1_con16 Register address for dmc_phy1->phy_con16
|
|
* @param phy0_con17 Register address for dmc_phy0->phy_con17
|
|
* @param phy1_con17 Register address for dmc_phy1->phy_con17
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
|
|
uint32_t *phy1_con16, uint32_t *phy0_con17,
|
|
uint32_t *phy1_con17);
|
|
/*
|
|
* Send NOP and MRS/EMRS Direct commands
|
|
*
|
|
* @param mem Memory timings for this memory type.
|
|
* @param directcmd Register address for dmc_phy->directcmd
|
|
*/
|
|
void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd);
|
|
|
|
/*
|
|
* Send PALL Direct commands
|
|
*
|
|
* @param mem Memory timings for this memory type.
|
|
* @param directcmd Register address for dmc_phy->directcmd
|
|
*/
|
|
void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd);
|
|
|
|
/*
|
|
* Reset the DLL. This function is common between DDR3 and LPDDR2.
|
|
* However, the reset value is different. So we are passing a flag
|
|
* ddr_mode to distinguish between LPDDR2 and DDR3.
|
|
*
|
|
* @param phycontrol0 Register address for dmc_phy->phycontrol0
|
|
* @param ddr_mode Type of DDR memory
|
|
*/
|
|
void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode);
|
|
#endif
|
|
|