upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
137 lines
2.7 KiB
137 lines
2.7 KiB
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
#include <tsec.h>
|
|
#include <netdev.h>
|
|
#include <fsl_esdhc.h>
|
|
|
|
#include "fsl_epu.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
char buf1[32], buf2[32];
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
unsigned int svr, major, minor, ver, i;
|
|
|
|
svr = in_be32(&gur->svr);
|
|
major = SVR_MAJ(svr);
|
|
minor = SVR_MIN(svr);
|
|
|
|
puts("CPU: Freescale LayerScape ");
|
|
|
|
ver = SVR_SOC_VER(svr);
|
|
switch (ver) {
|
|
case SOC_VER_SLS1020:
|
|
puts("SLS1020");
|
|
break;
|
|
case SOC_VER_LS1020:
|
|
puts("LS1020");
|
|
break;
|
|
case SOC_VER_LS1021:
|
|
puts("LS1021");
|
|
break;
|
|
case SOC_VER_LS1022:
|
|
puts("LS1022");
|
|
break;
|
|
default:
|
|
puts("Unknown");
|
|
break;
|
|
}
|
|
|
|
if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
|
|
puts("E");
|
|
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
|
|
|
|
puts("Clock Configuration:");
|
|
|
|
printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk));
|
|
printf("\n Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk));
|
|
printf("DDR:%-4s MHz (%s MT/s data rate), ",
|
|
strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk));
|
|
puts("\n");
|
|
|
|
/* Display the RCW, so that no one gets confused as to what RCW
|
|
* we're actually using for this boot.
|
|
*/
|
|
puts("Reset Configuration Word (RCW):");
|
|
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
|
|
u32 rcw = in_be32(&gur->rcwsr[i]);
|
|
|
|
if ((i % 4) == 0)
|
|
printf("\n %08x:", i * 4);
|
|
printf(" %08x", rcw);
|
|
}
|
|
puts("\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void enable_caches(void)
|
|
{
|
|
#ifndef CONFIG_SYS_ICACHE_OFF
|
|
icache_enable();
|
|
#endif
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
dcache_enable();
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
return fsl_esdhc_mmc_init(bis);
|
|
}
|
|
#endif
|
|
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_TSEC_ENET
|
|
tsec_standard_init(bis);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
|
|
|
|
/*
|
|
* After wakeup from deep sleep, Clear EPU registers
|
|
* as early as possible to prevent from possible issue.
|
|
* It's also safe to clear at normal boot.
|
|
*/
|
|
fsl_epu_clean(epu_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
|
|
/* Set the address at which the secondary core starts from.*/
|
|
void smp_set_core_boot_addr(unsigned long addr, int corenr)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
|
|
out_be32(&gur->scratchrw[0], addr);
|
|
}
|
|
|
|
/* Release the secondary core from holdoff state and kick it */
|
|
void smp_kick_all_cpus(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
|
|
out_be32(&gur->brrl, 0x2);
|
|
}
|
|
#endif
|
|
|