upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
605 lines
15 KiB
605 lines
15 KiB
/*
|
|
* (C) Copyright 2000-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <asm/fec.h>
|
|
|
|
#ifdef CONFIG_M5271
|
|
#include <asm/m5271.h>
|
|
#include <asm/immap_5271.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_M5272
|
|
#include <asm/m5272.h>
|
|
#include <asm/immap_5272.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_M5282
|
|
#include <asm/m5282.h>
|
|
#include <asm/immap_5282.h>
|
|
#endif
|
|
|
|
#include <net.h>
|
|
#include <command.h>
|
|
|
|
#ifdef CONFIG_M5272
|
|
#define FEC_ADDR (CFG_MBAR + 0x840)
|
|
#endif
|
|
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
|
|
#define FEC_ADDR (CFG_MBAR + 0x1000)
|
|
#endif
|
|
|
|
#undef ET_DEBUG
|
|
#undef MII_DEBUG
|
|
|
|
#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) && defined(FEC_ENET)
|
|
|
|
#ifdef CFG_DISCOVER_PHY
|
|
#include <miiphy.h>
|
|
static void mii_discover_phy (void);
|
|
#endif
|
|
|
|
/* Ethernet Transmit and Receive Buffers */
|
|
#define DBUF_LENGTH 1520
|
|
|
|
#define TX_BUF_CNT 2
|
|
|
|
#define TOUT_LOOP 100
|
|
|
|
#define PKT_MAXBUF_SIZE 1518
|
|
#define PKT_MINBUF_SIZE 64
|
|
#define PKT_MAXBLR_SIZE 1520
|
|
|
|
|
|
static char txbuf[DBUF_LENGTH];
|
|
|
|
static uint rxIdx; /* index of the current RX buffer */
|
|
static uint txIdx; /* index of the current TX buffer */
|
|
|
|
/*
|
|
* FEC Ethernet Tx and Rx buffer descriptors allocated at the
|
|
* immr->udata_bd address on Dual-Port RAM
|
|
* Provide for Double Buffering
|
|
*/
|
|
|
|
typedef volatile struct CommonBufferDescriptor {
|
|
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
|
|
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
|
|
} RTXBD;
|
|
|
|
static RTXBD *rtx = NULL;
|
|
|
|
int eth_send (volatile void *packet, int length)
|
|
{
|
|
int j, rc;
|
|
volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
|
|
|
|
/* section 16.9.23.3
|
|
* Wait for ready
|
|
*/
|
|
j = 0;
|
|
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
|
|
&& (j < TOUT_LOOP)) {
|
|
udelay (1);
|
|
j++;
|
|
}
|
|
if (j >= TOUT_LOOP) {
|
|
printf ("TX not ready\n");
|
|
}
|
|
|
|
rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
|
|
rtx->txbd[txIdx].cbd_datlen = length;
|
|
rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
|
|
|
|
/* Activate transmit Buffer Descriptor polling */
|
|
fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
|
|
|
|
j = 0;
|
|
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
|
|
&& (j < TOUT_LOOP)) {
|
|
udelay (1);
|
|
j++;
|
|
}
|
|
if (j >= TOUT_LOOP) {
|
|
printf ("TX timeout\n");
|
|
}
|
|
#ifdef ET_DEBUG
|
|
printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
|
|
__FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc,
|
|
(rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2);
|
|
#endif
|
|
|
|
/* return only status bits */ ;
|
|
rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
|
|
|
|
txIdx = (txIdx + 1) % TX_BUF_CNT;
|
|
|
|
return rc;
|
|
}
|
|
|
|
int eth_rx (void)
|
|
{
|
|
int length;
|
|
volatile fec_t *fecp = (fec_t *) FEC_ADDR;
|
|
|
|
for (;;) {
|
|
/* section 16.9.23.2 */
|
|
if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
|
|
length = -1;
|
|
break; /* nothing received - leave for() loop */
|
|
}
|
|
|
|
length = rtx->rxbd[rxIdx].cbd_datlen;
|
|
|
|
if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
|
|
#ifdef ET_DEBUG
|
|
printf ("%s[%d] err: %x\n",
|
|
__FUNCTION__, __LINE__,
|
|
rtx->rxbd[rxIdx].cbd_sc);
|
|
#endif
|
|
} else {
|
|
/* Pass the packet up to the protocol layers. */
|
|
NetReceive (NetRxPackets[rxIdx], length - 4);
|
|
}
|
|
|
|
/* Give the buffer back to the FEC. */
|
|
rtx->rxbd[rxIdx].cbd_datlen = 0;
|
|
|
|
/* wrap around buffer index when necessary */
|
|
if ((rxIdx + 1) >= PKTBUFSRX) {
|
|
rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
|
|
(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
|
|
rxIdx = 0;
|
|
} else {
|
|
rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rxIdx++;
|
|
}
|
|
|
|
/* Try to fill Buffer Descriptors */
|
|
fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
/**************************************************************
|
|
*
|
|
* FEC Ethernet Initialization Routine
|
|
*
|
|
*************************************************************/
|
|
#define FEC_ECNTRL_ETHER_EN 0x00000002
|
|
#define FEC_ECNTRL_RESET 0x00000001
|
|
|
|
#define FEC_RCNTRL_BC_REJ 0x00000010
|
|
#define FEC_RCNTRL_PROM 0x00000008
|
|
#define FEC_RCNTRL_MII_MODE 0x00000004
|
|
#define FEC_RCNTRL_DRT 0x00000002
|
|
#define FEC_RCNTRL_LOOP 0x00000001
|
|
|
|
#define FEC_TCNTRL_FDEN 0x00000004
|
|
#define FEC_TCNTRL_HBC 0x00000002
|
|
#define FEC_TCNTRL_GTS 0x00000001
|
|
|
|
#define FEC_RESET_DELAY 50000
|
|
|
|
int eth_init (bd_t * bd)
|
|
{
|
|
#ifndef CFG_ENET_BD_BASE
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#endif
|
|
int i;
|
|
volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
|
|
|
|
/* Whack a reset.
|
|
* A delay is required between a reset of the FEC block and
|
|
* initialization of other FEC registers because the reset takes
|
|
* some time to complete. If you don't delay, subsequent writes
|
|
* to FEC registers might get killed by the reset routine which is
|
|
* still in progress.
|
|
*/
|
|
fecp->fec_ecntrl = FEC_ECNTRL_RESET;
|
|
for (i = 0;
|
|
(fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
|
|
++i) {
|
|
udelay (1);
|
|
}
|
|
if (i == FEC_RESET_DELAY) {
|
|
printf ("FEC_RESET_DELAY timeout\n");
|
|
return 0;
|
|
}
|
|
|
|
/* We use strictly polling mode only
|
|
*/
|
|
fecp->fec_imask = 0;
|
|
|
|
/* Clear any pending interrupt */
|
|
fecp->fec_ievent = 0xffffffff;
|
|
|
|
/* Set station address */
|
|
#define ea bd->bi_enetaddr
|
|
fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
|
|
(ea[2] << 8) | (ea[3]);
|
|
fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16);
|
|
#ifdef ET_DEBUG
|
|
printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
|
|
#endif
|
|
#undef ea
|
|
|
|
#ifdef CONFIG_M5271
|
|
/* Clear multicast address hash table
|
|
*/
|
|
fecp->fec_ghash_table_high = 0;
|
|
fecp->fec_ghash_table_low = 0;
|
|
|
|
/* Clear individual address hash table
|
|
*/
|
|
fecp->fec_ihash_table_high = 0;
|
|
fecp->fec_ihash_table_low = 0;
|
|
#else
|
|
/* Clear multicast address hash table
|
|
*/
|
|
#ifdef CONFIG_M5282
|
|
fecp->fec_ihash_table_high = 0;
|
|
fecp->fec_ihash_table_low = 0;
|
|
#else
|
|
fecp->fec_hash_table_high = 0;
|
|
fecp->fec_hash_table_low = 0;
|
|
#endif
|
|
#endif
|
|
|
|
/* Set maximum receive buffer size.
|
|
*/
|
|
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
|
|
|
|
/*
|
|
* Setup Buffers and Buffer Desriptors
|
|
*/
|
|
rxIdx = 0;
|
|
txIdx = 0;
|
|
|
|
if (!rtx) {
|
|
#ifdef CFG_ENET_BD_BASE
|
|
rtx = (RTXBD *) CFG_ENET_BD_BASE;
|
|
#else
|
|
rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
|
|
(((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
|
|
+0xFF)
|
|
& ~0xFF)
|
|
);
|
|
debug("set ENET_DB_BASE to %lX\n",(long) rtx);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Setup Receiver Buffer Descriptors (13.14.24.18)
|
|
* Settings:
|
|
* Empty, Wrap
|
|
*/
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rtx->rxbd[i].cbd_datlen = 0; /* Reset */
|
|
rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
|
|
}
|
|
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
|
|
|
|
/*
|
|
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
|
|
* Settings:
|
|
* Last, Tx CRC
|
|
*/
|
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
|
rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
|
|
rtx->txbd[i].cbd_datlen = 0; /* Reset */
|
|
rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
|
|
}
|
|
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
|
|
|
|
/* Set receive and transmit descriptor base
|
|
*/
|
|
fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
|
|
fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
|
|
|
|
/* Enable MII mode
|
|
*/
|
|
|
|
#if 0 /* Full duplex mode */
|
|
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
|
|
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
|
|
#else /* Half duplex mode */
|
|
fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
|
|
fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
|
|
fecp->fec_x_cntrl = 0;
|
|
#endif
|
|
/* Set MII speed */
|
|
fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
|
|
fecp->fec_mii_speed *= 2;
|
|
|
|
/* Configure port B for MII.
|
|
*/
|
|
/* port initialization was already made in cpu_init_f() */
|
|
|
|
/* Now enable the transmit and receive processing
|
|
*/
|
|
fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
|
|
|
|
#ifdef CFG_DISCOVER_PHY
|
|
/* wait for the PHY to wake up after reset */
|
|
mii_discover_phy ();
|
|
#endif
|
|
|
|
/* And last, try to fill Rx Buffer Descriptors */
|
|
fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
|
|
|
|
return 1;
|
|
}
|
|
|
|
void eth_halt (void)
|
|
{
|
|
volatile fec_t *fecp = (fec_t *) FEC_ADDR;
|
|
|
|
fecp->fec_ecntrl = 0;
|
|
}
|
|
|
|
|
|
#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
|
|
|
|
static int phyaddr = -1; /* didn't find a PHY yet */
|
|
static uint phytype;
|
|
|
|
/* Make MII read/write commands for the FEC.
|
|
*/
|
|
|
|
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
|
|
(REG & 0x1f) << 18))
|
|
|
|
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
|
|
(REG & 0x1f) << 18) | \
|
|
(VAL & 0xffff))
|
|
|
|
/* Interrupt events/masks.
|
|
*/
|
|
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
|
|
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
|
|
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
|
|
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
|
|
#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
|
|
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
|
|
#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
|
|
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
|
|
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
|
|
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
|
|
|
|
/* PHY identification
|
|
*/
|
|
#define PHY_ID_LXT970 0x78100000 /* LXT970 */
|
|
#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
|
|
#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
|
|
#define PHY_ID_QS6612 0x01814400 /* QS6612 */
|
|
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
|
|
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
|
|
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
|
|
|
|
/* send command to phy using mii, wait for result */
|
|
static uint mii_send (uint mii_cmd)
|
|
{
|
|
uint mii_reply;
|
|
volatile fec_t *ep = (fec_t *) (FEC_ADDR);
|
|
|
|
ep->fec_mii_data = mii_cmd; /* command to phy */
|
|
|
|
/* wait for mii complete */
|
|
while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */
|
|
mii_reply = ep->fec_mii_data; /* result from phy */
|
|
ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
|
|
#ifdef ET_DEBUG
|
|
printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
|
|
__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
|
|
#endif
|
|
return (mii_reply & 0xffff); /* data read from phy */
|
|
}
|
|
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
|
|
|
|
#if defined(CFG_DISCOVER_PHY)
|
|
static void mii_discover_phy (void)
|
|
{
|
|
#define MAX_PHY_PASSES 11
|
|
uint phyno;
|
|
int pass;
|
|
|
|
phyaddr = -1; /* didn't find a PHY yet */
|
|
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
|
|
if (pass > 1) {
|
|
/* PHY may need more time to recover from reset.
|
|
* The LXT970 needs 50ms typical, no maximum is
|
|
* specified, so wait 10ms before try again.
|
|
* With 11 passes this gives it 100ms to wake up.
|
|
*/
|
|
udelay (10000); /* wait 10ms */
|
|
}
|
|
for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) {
|
|
phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
|
|
#ifdef ET_DEBUG
|
|
printf ("PHY type 0x%x pass %d type ", phytype, pass);
|
|
#endif
|
|
if (phytype != 0xffff) {
|
|
phyaddr = phyno;
|
|
phytype <<= 16;
|
|
phytype |= mii_send (mk_mii_read (phyno,
|
|
PHY_PHYIDR2));
|
|
|
|
#ifdef ET_DEBUG
|
|
printf ("PHY @ 0x%x pass %d type ", phyno,
|
|
pass);
|
|
switch (phytype & 0xfffffff0) {
|
|
case PHY_ID_LXT970:
|
|
printf ("LXT970\n");
|
|
break;
|
|
case PHY_ID_LXT971:
|
|
printf ("LXT971\n");
|
|
break;
|
|
case PHY_ID_82555:
|
|
printf ("82555\n");
|
|
break;
|
|
case PHY_ID_QS6612:
|
|
printf ("QS6612\n");
|
|
break;
|
|
case PHY_ID_AMD79C784:
|
|
printf ("AMD79C784\n");
|
|
break;
|
|
case PHY_ID_LSI80225B:
|
|
printf ("LSI L80225/B\n");
|
|
break;
|
|
default:
|
|
printf ("0x%08x\n", phytype);
|
|
break;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
if (phyaddr < 0) {
|
|
printf ("No PHY device found.\n");
|
|
}
|
|
}
|
|
#endif /* CFG_DISCOVER_PHY */
|
|
|
|
#if ((CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
|
|
|
|
static int mii_init_done = 0;
|
|
|
|
/****************************************************************************
|
|
* mii_init -- Initialize the MII for MII command without ethernet
|
|
* This function is a subset of eth_init
|
|
****************************************************************************
|
|
*/
|
|
void mii_init (void)
|
|
{
|
|
volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
|
|
|
|
int i;
|
|
|
|
if (mii_init_done != 0) {
|
|
return;
|
|
}
|
|
|
|
/* Whack a reset.
|
|
* A delay is required between a reset of the FEC block and
|
|
* initialization of other FEC registers because the reset takes
|
|
* some time to complete. If you don't delay, subsequent writes
|
|
* to FEC registers might get killed by the reset routine which is
|
|
* still in progress.
|
|
*/
|
|
|
|
fecp->fec_ecntrl = FEC_ECNTRL_RESET;
|
|
for (i = 0;
|
|
(fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
|
|
++i) {
|
|
udelay (1);
|
|
}
|
|
if (i == FEC_RESET_DELAY) {
|
|
printf ("FEC_RESET_DELAY timeout\n");
|
|
return;
|
|
}
|
|
|
|
/* We use strictly polling mode only
|
|
*/
|
|
fecp->fec_imask = 0;
|
|
|
|
/* Clear any pending interrupt
|
|
*/
|
|
fecp->fec_ievent = 0xffffffff;
|
|
|
|
/* Set MII speed */
|
|
fecp->fec_mii_speed = 0x0e;
|
|
|
|
/* Configure port B for MII.
|
|
*/
|
|
/* port initialization was already made in cpu_init_f() */
|
|
|
|
/* Now enable the transmit and receive processing */
|
|
fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
|
|
|
|
mii_init_done = 1;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Read and write a MII PHY register, routines used by MII Utilities
|
|
*
|
|
* FIXME: These routines are expected to return 0 on success, but mii_send
|
|
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
|
|
* no PHY connected...
|
|
* For now always return 0.
|
|
* FIXME: These routines only work after calling eth_init() at least once!
|
|
* Otherwise they hang in mii_send() !!! Sorry!
|
|
*****************************************************************************/
|
|
|
|
int mcf52x2_miiphy_read (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short *value)
|
|
{
|
|
short rdreg; /* register working value */
|
|
|
|
#ifdef MII_DEBUG
|
|
printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
|
|
#endif
|
|
rdreg = mii_send (mk_mii_read (addr, reg));
|
|
|
|
*value = rdreg;
|
|
|
|
#ifdef MII_DEBUG
|
|
printf ("0x%04x\n", *value);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mcf52x2_miiphy_write (char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short value)
|
|
{
|
|
short rdreg; /* register working value */
|
|
|
|
#ifdef MII_DEBUG
|
|
printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
|
|
#endif
|
|
|
|
rdreg = mii_send (mk_mii_write (addr, reg, value));
|
|
|
|
#ifdef MII_DEBUG
|
|
printf ("0x%04x\n", value);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII) */
|
|
#endif /* CFG_CMD_NET, FEC_ENET */
|
|
|
|
int mcf52x2_miiphy_initialize(bd_t *bis)
|
|
{
|
|
#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) && defined(FEC_ENET)
|
|
#if ((CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
|
|
miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write);
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|