upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/stv0991.h

93 lines
2.5 KiB

/*
* (C) Copyright 2014
* Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_STV0991_H
#define __CONFIG_STV0991_H
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_CORTEX_R4
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_NO_FLASH
/* ram memory-related information */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define PHYS_SDRAM_1_SIZE 0x00198000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET 0x30000
#define CONFIG_ENV_ADDR \
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
/* serial port (PL011) configuration */
#define CONFIG_BAUDRATE 115200
#define CONFIG_PL01X_SERIAL
/* user interface */
#define CONFIG_SYS_PROMPT "STV0991> "
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+sizeof(CONFIG_SYS_PROMPT) + 16)
/* MISC */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/* U-boot Load Address */
#define CONFIG_SYS_TEXT_BASE 0x00010000
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* GMAC related configs */
#define CONFIG_MII
#define CONFIG_PHYLIB
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_PHY_MICREL
/* Command support defines */
#define CONFIG_CMD_PING
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_SYS_MEMTEST_START 0x0000
#define CONFIG_SYS_MEMTEST_END 1024*1024
#define CONFIG_CMD_MEMTEST
/* Misc configuration */
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "go 0x40040000"
#define CONFIG_OF_LIBFDT
/*
+ * QSPI support
+ */
#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */
#define CONFIG_CADENCE_QSPI
#define CONFIG_CQSPI_DECODER 0
#define CONFIG_CQSPI_REF_CLK ((30/4)/2)*1000*1000
#define CONFIG_CMD_SPI
#define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */
#define CONFIG_SPI_FLASH_WINBOND /* WINBOND */
#define CONFIG_CMD_SF
#endif
#endif /* __CONFIG_H */