upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

michael 67a490d60d atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN ... If NCE is hooked up to NCS3, we don't need to (and can't) explicitly set the state of the NCE pin. Instead, the controller asserts it automatically as part of a command/data access. Only "CE don't care"-type NAND chips can be used in this manner. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Reinhard Meyer <u-boot@emk-elektronik.de>		14 years ago
..
nand	atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN	14 years ago
onenand	…
spi	…
ubi	…
Makefile	…
at45.c	…
cfi_flash.c	cfi_flash: fix bug with flash banks with different sector numbers	14 years ago
cfi_mtd.c	…
dataflash.c	…
jedec_flash.c	add AM29F400BB to table of supported legacy flashs	14 years ago
mtdconcat.c	…
mtdcore.c	…
mtdpart.c	…
mw_eeprom.c	…
spr_smi.c	…