upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c

161 lines
3.5 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* Copyright (C) 2012 Renesas Solutions Corp.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <netdev.h>
#include <i2c.h>
#define MODEMR (0xFFCC0020)
#define MODEMR_MASK (0x6)
#define MODEMR_533MHZ (0x2)
int checkboard(void)
{
u32 r = readl(MODEMR);
if ((r & MODEMR_MASK) & MODEMR_533MHZ)
puts("CPU Clock: 533MHz\n");
else
puts("CPU Clock: 400MHz\n");
puts("BOARD: Alpha Project. AP-SH4A-4A\n");
return 0;
}
#define MSTPSR1 (0xFFC80044)
#define MSTPCR1 (0xFFC80034)
#define MSTPSR1_GETHER (1 << 14)
/* IPSR3 */
#define ET0_ETXD0 (0x4 << 3)
#define ET0_GTX_CLK_A (0x4 << 6)
#define ET0_ETXD1_A (0x4 << 9)
#define ET0_ETXD2_A (0x4 << 12)
#define ET0_ETXD3_A (0x4 << 15)
#define ET0_ETXD4 (0x3 << 18)
#define ET0_ETXD5_A (0x5 << 21)
#define ET0_ETXD6_A (0x5 << 24)
#define ET0_ETXD7 (0x4 << 27)
#define IPSR3_ETH_ENABLE \
(ET0_ETXD0 | ET0_GTX_CLK_A | ET0_ETXD1_A | ET0_ETXD2_A | \
ET0_ETXD3_A | ET0_ETXD4 | ET0_ETXD5_A | ET0_ETXD6_A | ET0_ETXD7)
/* IPSR4 */
#define ET0_ERXD7 (0x4)
#define ET0_RX_DV (0x4 << 3)
#define ET0_RX_ER (0x4 << 6)
#define ET0_CRS (0x4 << 9)
#define ET0_COL (0x4 << 12)
#define ET0_MDC (0x4 << 15)
#define ET0_MDIO_A (0x3 << 18)
#define ET0_LINK_A (0x3 << 20)
#define ET0_PHY_INT_A (0x3 << 24)
#define IPSR4_ETH_ENABLE \
(ET0_ERXD7 | ET0_RX_DV | ET0_RX_ER | ET0_CRS | ET0_COL | \
ET0_MDC | ET0_MDIO_A | ET0_LINK_A | ET0_PHY_INT_A)
/* IPSR8 */
#define ET0_ERXD0 (0x4 << 20)
#define ET0_ERXD1 (0x4 << 23)
#define ET0_ERXD2_A (0x3 << 26)
#define ET0_ERXD3_A (0x3 << 28)
#define IPSR8_ETH_ENABLE \
(ET0_ERXD0 | ET0_ERXD1 | ET0_ERXD2_A | ET0_ERXD3_A)
/* IPSR10 */
#define RX4_D (0x1 << 22)
#define TX4_D (0x1 << 23)
#define IPSR10_SCIF_ENABLE (RX4_D | TX4_D)
/* IPSR11 */
#define ET0_ERXD4 (0x4 << 4)
#define ET0_ERXD5 (0x4 << 7)
#define ET0_ERXD6 (0x3 << 10)
#define ET0_TX_EN (0x2 << 19)
#define ET0_TX_ER (0x2 << 21)
#define ET0_TX_CLK_A (0x4 << 23)
#define ET0_RX_CLK_A (0x3 << 26)
#define IPSR11_ETH_ENABLE \
(ET0_ERXD4 | ET0_ERXD5 | ET0_ERXD6 | ET0_TX_EN | ET0_TX_ER | \
ET0_TX_CLK_A | ET0_RX_CLK_A)
#define GPSR1_INIT (0xFFFF7FFF)
#define GPSR2_INIT (0x4005FEFF)
#define GPSR3_INIT (0x2EFFFFFF)
#define GPSR4_INIT (0xC7000000)
int board_init(void)
{
u32 data;
/* Set IPSR register */
data = readl(IPSR3);
data |= IPSR3_ETH_ENABLE;
writel(~data, PMMR);
writel(data, IPSR3);
data = readl(IPSR4);
data |= IPSR4_ETH_ENABLE;
writel(~data, PMMR);
writel(data, IPSR4);
data = readl(IPSR8);
data |= IPSR8_ETH_ENABLE;
writel(~data, PMMR);
writel(data, IPSR8);
data = readl(IPSR10);
data |= IPSR10_SCIF_ENABLE;
writel(~data, PMMR);
writel(data, IPSR10);
data = readl(IPSR11);
data |= IPSR11_ETH_ENABLE;
writel(~data, PMMR);
writel(data, IPSR11);
/* GPIO select */
data = GPSR1_INIT;
writel(~data, PMMR);
writel(data, GPSR1);
data = GPSR2_INIT;
writel(~data, PMMR);
writel(data, GPSR2);
data = GPSR3_INIT;
writel(~data, PMMR);
writel(data, GPSR3);
data = GPSR4_INIT;
writel(~data, PMMR);
writel(data, GPSR4);
data = 0x0;
writel(~data, PMMR);
writel(data, GPSR5);
/* mode select */
data = MODESEL2_INIT;
writel(~data, PMMR);
writel(data, MODESEL2);
#if defined(CONFIG_SH_ETHER)
u32 r = readl(MSTPSR1);
if (r & MSTPSR1_GETHER)
writel((r & ~MSTPSR1_GETHER), MSTPCR1);
#endif
return 0;
}
int board_late_init(void)
{
printf("Cannot use I2C to get MAC address\n");
return 0;
}