upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
244 lines
6.9 KiB
244 lines
6.9 KiB
/*
|
|
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include <net.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
unsigned long sdrreg;
|
|
|
|
/*
|
|
* Enable GPIO for pins 18 - 24
|
|
* 18 = SEEPROM_WP
|
|
* 19 = #M_RST
|
|
* 20 = #MONARCH
|
|
* 21 = #LED_ALARM
|
|
* 22 = #LED_ACT
|
|
* 23 = #LED_STATUS1
|
|
* 24 = #LED_STATUS2
|
|
*/
|
|
mfsdr(SDR0_PFC0, sdrreg);
|
|
mtsdr(SDR0_PFC0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
|
|
out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
|
|
LED0_OFF();
|
|
LED1_OFF();
|
|
LED2_OFF();
|
|
LED3_OFF();
|
|
|
|
/* Setup the external bus controller/chip selects */
|
|
mtebc(PB0AP, 0x04055200); /* 16MB Strata FLASH */
|
|
mtebc(PB0CR, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */
|
|
mtebc(PB1AP, 0x04055200); /* 512KB Socketed AMD FLASH */
|
|
mtebc(PB1CR, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
|
|
mtebc(PB6AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
|
|
mtebc(PB6CR, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */
|
|
mtebc(PB7AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
|
|
mtebc(PB7CR, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */
|
|
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*
|
|
* Because of the interrupt handling rework to handle 440GX interrupts
|
|
* with the common code, we needed to change names of the UIC registers.
|
|
* Here the new relationship:
|
|
*
|
|
* U-Boot name 440GX name
|
|
* -----------------------
|
|
* UIC0 UICB0
|
|
* UIC1 UIC0
|
|
* UIC2 UIC1
|
|
* UIC3 UIC2
|
|
*/
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000003); /* SMI & UIC1 crit are critical */
|
|
mtdcr(UIC1PR, 0xfffffe00); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x01c00000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0xffffc0ff); /* per ref-board manual */
|
|
mtdcr(UIC2TR, 0x00ff8000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC3ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC3CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC3TR, 0x00ff8c0f); /* per ref-board manual */
|
|
mtdcr(UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC0SR, 0xfc000000); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC0PR, 0xfc000000); /* */
|
|
mtdcr(UIC0TR, 0x00000000); /* */
|
|
mtdcr(UIC0VR, 0x00000001); /* */
|
|
|
|
LED0_ON();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s;
|
|
|
|
printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
|
|
printf(" ");
|
|
s = getenv("board_rev");
|
|
if (s)
|
|
printf("Rev %s, ", s);
|
|
s = getenv("serial#");
|
|
if (s)
|
|
printf("Serial# %s, ", s);
|
|
s = getenv("board_cfg");
|
|
if (s)
|
|
printf("Cfg %s", s);
|
|
printf("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
return spd_sdram();
|
|
}
|
|
|
|
/*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*/
|
|
|
|
#if defined(CONFIG_PCI)
|
|
int pci_pre_init(struct pci_controller * hose)
|
|
{
|
|
unsigned long strap;
|
|
|
|
/* See if we're supposed to setup the pci */
|
|
mfsdr(SDR0_SDSTP1, strap);
|
|
if ((strap & 0x00010000) == 0)
|
|
return 0;
|
|
|
|
#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
|
|
/* Setup System Device Register PCIL0_XCR */
|
|
mfsdr(SDR0_XCR, strap);
|
|
strap &= 0x0f000000;
|
|
mtsdr(SDR0_XCR, strap);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
|
|
/*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*/
|
|
void pci_target_init(struct pci_controller * hose)
|
|
{
|
|
/* Disable everything */
|
|
out32r(PCIL0_PIM0SA, 0);
|
|
out32r(PCIL0_PIM1SA, 0);
|
|
out32r(PCIL0_PIM2SA, 0);
|
|
out32r(PCIL0_EROMBA, 0); /* disable expansion rom */
|
|
|
|
/*
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
|
* options to not support sizes such as 128/256 MB.
|
|
*/
|
|
out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
|
|
out32r(PCIL0_PIM0LAH, 0);
|
|
out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
|
|
|
|
out32r(PCIL0_BAR0, 0);
|
|
|
|
/* Program the board's subsystem id/vendor id */
|
|
out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
|
|
out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
|
|
|
|
out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*/
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
#ifdef CONFIG_POST
|
|
/*
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
* Called from board_init_f().
|
|
*/
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
return ctrlc();
|
|
}
|
|
|
|
void post_word_store(ulong a)
|
|
{
|
|
volatile ulong *save_addr =
|
|
(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
|
|
|
|
*save_addr = a;
|
|
}
|
|
|
|
ulong post_word_load(void)
|
|
{
|
|
volatile ulong *save_addr =
|
|
(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
|
|
|
|
return *save_addr;
|
|
}
|
|
#endif
|
|
|