upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
305 lines
7.6 KiB
305 lines
7.6 KiB
/*
|
|
* (C) Copyright 2006
|
|
* Heiko Schocher, hs@denx.de
|
|
* Based on ACE1XK.c
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h> /* core U-Boot definitions */
|
|
#include <altera.h>
|
|
#include <ACEX1K.h> /* ACEX device family */
|
|
|
|
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
|
|
|
|
/* Define FPGA_DEBUG to get debug printf's */
|
|
#ifdef FPGA_DEBUG
|
|
#define PRINTF(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PRINTF(fmt,args...)
|
|
#endif
|
|
|
|
/* Note: The assumption is that we cannot possibly run fast enough to
|
|
* overrun the device (the Slave Parallel mode can free run at 50MHz).
|
|
* If there is a need to operate slower, define CONFIG_FPGA_DELAY in
|
|
* the board config file to slow things down.
|
|
*/
|
|
#ifndef CONFIG_FPGA_DELAY
|
|
#define CONFIG_FPGA_DELAY()
|
|
#endif
|
|
|
|
#ifndef CFG_FPGA_WAIT
|
|
#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */
|
|
#endif
|
|
|
|
static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
|
|
static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
|
|
/* static int CYC2_ps_info( Altera_desc *desc ); */
|
|
static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* CYCLON2 Generic Implementation */
|
|
int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case passive_serial:
|
|
PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
|
|
ret_val = CYC2_ps_load (desc, buf, bsize);
|
|
break;
|
|
|
|
/* Add new interface types here */
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL;
|
|
|
|
switch (desc->iface) {
|
|
case passive_serial:
|
|
PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
|
|
ret_val = CYC2_ps_dump (desc, buf, bsize);
|
|
break;
|
|
|
|
/* Add new interface types here */
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
int CYC2_info( Altera_desc *desc )
|
|
{
|
|
return FPGA_SUCCESS;
|
|
}
|
|
|
|
int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume a failure */
|
|
|
|
if (desc->family != Altera_CYC2) {
|
|
printf ("%s: Unsupported family type, %d\n",
|
|
__FUNCTION__, desc->family);
|
|
return FPGA_FAIL;
|
|
} else
|
|
switch (desc->iface) {
|
|
case passive_serial:
|
|
ret_val = CYC2_ps_reloc (desc, reloc_offset);
|
|
break;
|
|
|
|
/* Add new interface types here */
|
|
|
|
default:
|
|
printf ("%s: Unsupported interface type, %d\n",
|
|
__FUNCTION__, desc->iface);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/* CYCLON2 Passive Serial Generic Implementation */
|
|
static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume the worst */
|
|
Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
|
|
int ret = 0;
|
|
|
|
PRINTF ("%s: start with interface functions @ 0x%p\n",
|
|
__FUNCTION__, fn);
|
|
|
|
if (fn) {
|
|
int cookie = desc->cookie; /* make a local copy */
|
|
unsigned long ts; /* timestamp */
|
|
|
|
PRINTF ("%s: Function Table:\n"
|
|
"ptr:\t0x%p\n"
|
|
"struct: 0x%p\n"
|
|
"config:\t0x%p\n"
|
|
"status:\t0x%p\n"
|
|
"write:\t0x%p\n"
|
|
"done:\t0x%p\n\n",
|
|
__FUNCTION__, &fn, fn, fn->config, fn->status,
|
|
fn->write, fn->done);
|
|
#ifdef CFG_FPGA_PROG_FEEDBACK
|
|
printf ("Loading FPGA Device %d...", cookie);
|
|
#endif
|
|
|
|
/*
|
|
* Run the pre configuration function if there is one.
|
|
*/
|
|
if (*fn->pre) {
|
|
(*fn->pre) (cookie);
|
|
}
|
|
|
|
/* Establish the initial state */
|
|
(*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
|
|
|
|
udelay(2); /* T_cfg > 2us */
|
|
|
|
/* Wait for nSTATUS to be asserted */
|
|
ts = get_timer (0); /* get current time */
|
|
do {
|
|
CONFIG_FPGA_DELAY ();
|
|
if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
|
|
puts ("** Timeout waiting for STATUS to go high.\n");
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
} while (!(*fn->status) (cookie));
|
|
|
|
/* Get ready for the burn */
|
|
CONFIG_FPGA_DELAY ();
|
|
|
|
ret = (*fn->write) (buf, bsize, TRUE, cookie);
|
|
if (ret) {
|
|
puts ("** Write failed.\n");
|
|
(*fn->abort) (cookie);
|
|
return FPGA_FAIL;
|
|
}
|
|
#ifdef CFG_FPGA_PROG_FEEDBACK
|
|
puts(" OK? ...");
|
|
#endif
|
|
|
|
CONFIG_FPGA_DELAY ();
|
|
|
|
#ifdef CFG_FPGA_PROG_FEEDBACK
|
|
putc (' '); /* terminate the dotted line */
|
|
#endif
|
|
|
|
/*
|
|
* Checking FPGA's CONF_DONE signal - correctly booted ?
|
|
*/
|
|
|
|
if ( ! (*fn->done) (cookie) ) {
|
|
puts ("** Booting failed! CONF_DONE is still deasserted.\n");
|
|
(*fn->abort) (cookie);
|
|
return (FPGA_FAIL);
|
|
}
|
|
#ifdef CFG_FPGA_PROG_FEEDBACK
|
|
puts(" OK\n");
|
|
#endif
|
|
|
|
ret_val = FPGA_SUCCESS;
|
|
|
|
#ifdef CFG_FPGA_PROG_FEEDBACK
|
|
if (ret_val == FPGA_SUCCESS) {
|
|
puts ("Done.\n");
|
|
}
|
|
else {
|
|
puts ("Fail.\n");
|
|
}
|
|
#endif
|
|
(*fn->post) (cookie);
|
|
|
|
} else {
|
|
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
|
|
{
|
|
/* Readback is only available through the Slave Parallel and */
|
|
/* boundary-scan interfaces. */
|
|
printf ("%s: Passive Serial Dumping is unavailable\n",
|
|
__FUNCTION__);
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
|
|
{
|
|
int ret_val = FPGA_FAIL; /* assume the worst */
|
|
Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
|
|
(Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
|
|
|
|
if (fn) {
|
|
ulong addr;
|
|
|
|
/* Get the relocated table address */
|
|
addr = (ulong) fn + reloc_offset;
|
|
fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
|
|
|
|
if (!fn_r->relocated) {
|
|
|
|
if (memcmp (fn_r, fn,
|
|
sizeof (Altera_CYC2_Passive_Serial_fns))
|
|
== 0) {
|
|
/* good copy of the table, fix the descriptor pointer */
|
|
desc->iface_fns = fn_r;
|
|
} else {
|
|
PRINTF ("%s: Invalid function table at 0x%p\n",
|
|
__FUNCTION__, fn_r);
|
|
return FPGA_FAIL;
|
|
}
|
|
|
|
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
|
|
desc);
|
|
|
|
addr = (ulong) (fn->pre) + reloc_offset;
|
|
fn_r->pre = (Altera_pre_fn) addr;
|
|
|
|
addr = (ulong) (fn->config) + reloc_offset;
|
|
fn_r->config = (Altera_config_fn) addr;
|
|
|
|
addr = (ulong) (fn->status) + reloc_offset;
|
|
fn_r->status = (Altera_status_fn) addr;
|
|
|
|
addr = (ulong) (fn->done) + reloc_offset;
|
|
fn_r->done = (Altera_done_fn) addr;
|
|
|
|
addr = (ulong) (fn->write) + reloc_offset;
|
|
fn_r->write = (Altera_write_fn) addr;
|
|
|
|
addr = (ulong) (fn->abort) + reloc_offset;
|
|
fn_r->abort = (Altera_abort_fn) addr;
|
|
|
|
addr = (ulong) (fn->post) + reloc_offset;
|
|
fn_r->post = (Altera_post_fn) addr;
|
|
|
|
fn_r->relocated = TRUE;
|
|
|
|
} else {
|
|
/* this table has already been moved */
|
|
/* XXX - should check to see if the descriptor is correct */
|
|
desc->iface_fns = fn_r;
|
|
}
|
|
|
|
ret_val = FPGA_SUCCESS;
|
|
} else {
|
|
printf ("%s: NULL Interface function table!\n", __FUNCTION__);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */
|
|
|