upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
194 lines
4.5 KiB
194 lines
4.5 KiB
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include "stm32mp1_ddr.h"
|
|
|
|
static const char *const clkname[] = {
|
|
"ddrc1",
|
|
"ddrc2",
|
|
"ddrcapb",
|
|
"ddrphycapb",
|
|
"ddrphyc" /* LAST clock => used for get_rate() */
|
|
};
|
|
|
|
int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
|
|
{
|
|
unsigned long ddrphy_clk;
|
|
unsigned long ddr_clk;
|
|
struct clk clk;
|
|
int ret;
|
|
int idx;
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
|
|
ret = clk_get_by_name(priv->dev, clkname[idx], &clk);
|
|
|
|
if (!ret)
|
|
ret = clk_enable(&clk);
|
|
|
|
if (ret) {
|
|
printf("error for %s : %d\n", clkname[idx], ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
priv->clk = clk;
|
|
ddrphy_clk = clk_get_rate(&priv->clk);
|
|
|
|
debug("DDR: mem_speed (%d MHz), RCC %d MHz\n",
|
|
mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
|
|
/* max 10% frequency delta */
|
|
ddr_clk = abs(ddrphy_clk - mem_speed * 1000 * 1000);
|
|
if (ddr_clk > (mem_speed * 1000 * 100)) {
|
|
pr_err("DDR expected freq %d MHz, current is %d MHz\n",
|
|
mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
|
|
{
|
|
struct ddr_info *priv = dev_get_priv(dev);
|
|
int ret, idx;
|
|
struct clk axidcg;
|
|
struct stm32mp1_ddr_config config;
|
|
|
|
#define PARAM(x, y) \
|
|
{ x,\
|
|
offsetof(struct stm32mp1_ddr_config, y),\
|
|
sizeof(config.y) / sizeof(u32)}
|
|
|
|
#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
|
|
#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
|
|
|
|
const struct {
|
|
const char *name; /* name in DT */
|
|
const u32 offset; /* offset in config struct */
|
|
const u32 size; /* size of parameters */
|
|
} param[] = {
|
|
CTL_PARAM(reg),
|
|
CTL_PARAM(timing),
|
|
CTL_PARAM(map),
|
|
CTL_PARAM(perf),
|
|
PHY_PARAM(reg),
|
|
PHY_PARAM(timing),
|
|
PHY_PARAM(cal)
|
|
};
|
|
|
|
config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0);
|
|
config.info.size = dev_read_u32_default(dev, "st,mem-size", 0);
|
|
config.info.name = dev_read_string(dev, "st,mem-name");
|
|
if (!config.info.name) {
|
|
debug("%s: no st,mem-name\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
printf("RAM: %s\n", config.info.name);
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
|
|
ret = dev_read_u32_array(dev, param[idx].name,
|
|
(void *)((u32)&config +
|
|
param[idx].offset),
|
|
param[idx].size);
|
|
debug("%s: %s[0x%x] = %d\n", __func__,
|
|
param[idx].name, param[idx].size, ret);
|
|
if (ret) {
|
|
pr_err("%s: Cannot read %s\n",
|
|
__func__, param[idx].name);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ret = clk_get_by_name(dev, "axidcg", &axidcg);
|
|
if (ret) {
|
|
debug("%s: Cannot found axidcg\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
clk_disable(&axidcg); /* disable clock gating during init */
|
|
|
|
stm32mp1_ddr_init(priv, &config);
|
|
|
|
clk_enable(&axidcg); /* enable clock gating */
|
|
|
|
/* check size */
|
|
debug("%s : get_ram_size(%x, %x)\n", __func__,
|
|
(u32)priv->info.base, (u32)STM32_DDR_SIZE);
|
|
|
|
priv->info.size = get_ram_size((long *)priv->info.base,
|
|
STM32_DDR_SIZE);
|
|
|
|
debug("%s : %x\n", __func__, (u32)priv->info.size);
|
|
|
|
/* check memory access for all memory */
|
|
if (config.info.size != priv->info.size) {
|
|
printf("DDR invalid size : 0x%x, expected 0x%x\n",
|
|
priv->info.size, config.info.size);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int stm32mp1_ddr_probe(struct udevice *dev)
|
|
{
|
|
struct ddr_info *priv = dev_get_priv(dev);
|
|
struct regmap *map;
|
|
int ret;
|
|
|
|
debug("STM32MP1 DDR probe\n");
|
|
priv->dev = dev;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->ctl = regmap_get_range(map, 0);
|
|
priv->phy = regmap_get_range(map, 1);
|
|
|
|
priv->rcc = STM32_RCC_BASE;
|
|
|
|
priv->info.base = STM32_DDR_BASE;
|
|
|
|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
|
|
priv->info.size = 0;
|
|
return stm32mp1_ddr_setup(dev);
|
|
#else
|
|
priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0);
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct ddr_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops stm32mp1_ddr_ops = {
|
|
.get_info = stm32mp1_ddr_get_info,
|
|
};
|
|
|
|
static const struct udevice_id stm32mp1_ddr_ids[] = {
|
|
{ .compatible = "st,stm32mp1-ddr" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ddr_stm32mp1) = {
|
|
.name = "stm32mp1_ddr",
|
|
.id = UCLASS_RAM,
|
|
.of_match = stm32mp1_ddr_ids,
|
|
.ops = &stm32mp1_ddr_ops,
|
|
.probe = stm32mp1_ddr_probe,
|
|
.priv_auto_alloc_size = sizeof(struct ddr_info),
|
|
};
|
|
|