upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/genesi/mx51_efikamx/imximage_sb.cfg

122 lines
3.4 KiB

/*
* Copyright (C) 2009 Pegatron Corporation
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
* Copyright (C) 2009-2012 Genesi USA, Inc.
*
* BASED ON: imx51evk
*
* (C) Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM spi
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* DDR bus IOMUX PAD settings */
DATA 4 0x73fa88a0 0x200 # GRP_INMODE1
DATA 4 0x73fa850c 0x20c5 # SDODT1
DATA 4 0x73fa8510 0x20c5 # SDODT0
DATA 4 0x73fa8848 0x4 # DDR_A1
DATA 4 0x73fa84b8 0xe7 # DRAM_SDCLK
DATA 4 0x73fa84bc 0x45 # DRAM_SDQS0
DATA 4 0x73fa84c0 0x45 # DRAM_SDQS1
DATA 4 0x73fa84c4 0x45 # DRAM_SDQS2
DATA 4 0x73fa84c8 0x45 # DRAM_SDQS3
DATA 4 0x73fa8820 0x0 # DDRPKS
DATA 4 0x73fa84ac 0xe5 # SDWE
DATA 4 0x73fa84b0 0xe5 # SDCKE0
DATA 4 0x73fa84b4 0xe5 # SDCKE1
DATA 4 0x73fa84cc 0xe5 # DRAM_CS0
DATA 4 0x73fa84d0 0xe4 # DRAM_CS1
/*
* Setting DDR for micron
* 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
* CAS=3 BL=4
*/
/* ESDCTL_ESDCTL0 */
DATA 4 0x83fd9000 0x82a20000
/* ESDCTL_ESDCTL1 */
DATA 4 0x83fd9008 0x82a20000
/* ESDCTL_ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
/* ESDCTL_ESDCFG0 */
DATA 4 0x83fd9004 0x333574aa
/* ESDCTL_ESDCFG1 */
DATA 4 0x83fd900c 0x333574aa
/* Init DRAM on CS0 */
/* ESDCTL_ESDSCR */
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x0000801a
DATA 4 0x83fd9014 0x0000801b
DATA 4 0x83fd9014 0x00448019
DATA 4 0x83fd9014 0x07328018
DATA 4 0x83fd9014 0x04008008
DATA 4 0x83fd9014 0x00008010
DATA 4 0x83fd9014 0x00008010
DATA 4 0x83fd9014 0x06328018
DATA 4 0x83fd9014 0x03808019
DATA 4 0x83fd9014 0x00408019
DATA 4 0x83fd9014 0x00008000
/* Init DRAM on CS1 */
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x0000801e
DATA 4 0x83fd9014 0x0000801f
DATA 4 0x83fd9014 0x0000801d
DATA 4 0x83fd9014 0x0732801c
DATA 4 0x83fd9014 0x0400800c
DATA 4 0x83fd9014 0x00008014
DATA 4 0x83fd9014 0x00008014
DATA 4 0x83fd9014 0x0632801c
DATA 4 0x83fd9014 0x0380801d
DATA 4 0x83fd9014 0x0042801d
DATA 4 0x83fd9014 0x00008004
/* Write to CTL0 */
DATA 4 0x83fd9000 0xb2a20000
/* Write to CTL1 */
DATA 4 0x83fd9008 0xb2a20000
/* ESDMISC */
DATA 4 0x83fd9010 0xcaaaf6d0
/* ESDCTL_ESDCDLYGD */
DATA 4 0x83fd9034 0x90000000
DATA 4 0x83fd9014 0x00000000