upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
178 lines
5.0 KiB
178 lines
5.0 KiB
/*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200)
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
#include <mpc5xxx.h>
|
|
|
|
/* System RAM mapped over PCI */
|
|
#define CONFIG_PCI_MEMORY_BUS CFG_SDRAM_BASE
|
|
#define CONFIG_PCI_MEMORY_PHYS CFG_SDRAM_BASE
|
|
#define CONFIG_PCI_MEMORY_SIZE (1024 * 1024 * 1024)
|
|
|
|
/* PCIIWCR bit fields */
|
|
#define IWCR_MEM (0 << 3)
|
|
#define IWCR_IO (1 << 3)
|
|
#define IWCR_READ (0 << 1)
|
|
#define IWCR_READLINE (1 << 1)
|
|
#define IWCR_READMULT (2 << 1)
|
|
#define IWCR_EN (1 << 0)
|
|
|
|
static int mpc5200_read_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int offset, u32* value)
|
|
{
|
|
*(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
|
|
eieio();
|
|
udelay(10);
|
|
*value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
|
|
eieio();
|
|
*(volatile u32 *)MPC5XXX_PCI_CAR = 0;
|
|
udelay(10);
|
|
return 0;
|
|
}
|
|
|
|
static int mpc5200_write_config_dword(struct pci_controller *hose,
|
|
pci_dev_t dev, int offset, u32 value)
|
|
{
|
|
*(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
|
|
eieio();
|
|
udelay(10);
|
|
out_le32((volatile u32 *)CONFIG_PCI_IO_PHYS, value);
|
|
eieio();
|
|
*(volatile u32 *)MPC5XXX_PCI_CAR = 0;
|
|
udelay(10);
|
|
return 0;
|
|
}
|
|
|
|
void pci_mpc5xxx_init (struct pci_controller *hose)
|
|
{
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
/* System space */
|
|
pci_set_region(hose->regions + 0,
|
|
CONFIG_PCI_MEMORY_BUS,
|
|
CONFIG_PCI_MEMORY_PHYS,
|
|
CONFIG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(hose->regions + 1,
|
|
CONFIG_PCI_MEM_BUS,
|
|
CONFIG_PCI_MEM_PHYS,
|
|
CONFIG_PCI_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* PCI IO space */
|
|
pci_set_region(hose->regions + 2,
|
|
CONFIG_PCI_IO_BUS,
|
|
CONFIG_PCI_IO_PHYS,
|
|
CONFIG_PCI_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
|
|
pci_register_hose(hose);
|
|
|
|
/* GPIO Multiplexing - enable PCI */
|
|
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~(1 << 15);
|
|
|
|
/* Set host bridge as pci master and enable memory decoding */
|
|
*(vu_long *)MPC5XXX_PCI_CMD |=
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
|
|
/* Set maximum latency timer */
|
|
*(vu_long *)MPC5XXX_PCI_CFG |= (0xf800);
|
|
|
|
/* Set cache line size */
|
|
*(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) |
|
|
(CFG_CACHELINE_SIZE / 4);
|
|
|
|
/* Map MBAR to PCI space */
|
|
*(vu_long *)MPC5XXX_PCI_BAR0 = CFG_MBAR;
|
|
*(vu_long *)MPC5XXX_PCI_TBATR1 = CFG_MBAR | 1;
|
|
|
|
/* Map RAM to PCI space */
|
|
*(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
|
|
*(vu_long *)MPC5XXX_PCI_TBATR1 = CONFIG_PCI_MEMORY_PHYS | 1;
|
|
|
|
/* Enable snooping for RAM */
|
|
*(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15);
|
|
*(vu_long *)(MPC5XXX_XLBARB + 0x70) = CONFIG_PCI_MEMORY_PHYS | 0x1d;
|
|
|
|
/* Park XLB on PCI */
|
|
*(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~((7 << 8) | (3 << 5));
|
|
*(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (3 << 8) | (3 << 5);
|
|
|
|
#if 0
|
|
/* Enable piplining */
|
|
*(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~(1 << 31);
|
|
#endif
|
|
|
|
/* Disable interrupts from PCI controller */
|
|
*(vu_long *)MPC5XXX_PCI_GSCR &= ~(7 << 12);
|
|
*(vu_long *)MPC5XXX_PCI_ICR &= ~(7 << 24);
|
|
|
|
/* Disable initiator windows */
|
|
*(vu_long *)MPC5XXX_PCI_IWCR = 0;
|
|
|
|
/* Map PCI memory to physical space */
|
|
*(vu_long *)MPC5XXX_PCI_IW0BTAR = CONFIG_PCI_MEM_PHYS |
|
|
(((CONFIG_PCI_MEM_SIZE - 1) >> 8) & 0x00ff0000) |
|
|
(CONFIG_PCI_MEM_BUS >> 16);
|
|
*(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_MEM | IWCR_READ | IWCR_EN) << 24;
|
|
|
|
/* Map PCI I/O to physical space */
|
|
*(vu_long *)MPC5XXX_PCI_IW1BTAR = CONFIG_PCI_IO_PHYS |
|
|
(((CONFIG_PCI_IO_SIZE - 1) >> 8) & 0x00ff0000) |
|
|
(CONFIG_PCI_IO_BUS >> 16);
|
|
*(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_IO | IWCR_READ | IWCR_EN) << 16;
|
|
|
|
/* Reset the PCI bus */
|
|
*(vu_long *)MPC5XXX_PCI_GSCR |= 1;
|
|
udelay(1000);
|
|
*(vu_long *)MPC5XXX_PCI_GSCR &= ~1;
|
|
udelay(1000);
|
|
|
|
pci_set_ops(hose,
|
|
pci_hose_read_config_byte_via_dword,
|
|
pci_hose_read_config_word_via_dword,
|
|
mpc5200_read_config_dword,
|
|
pci_hose_write_config_byte_via_dword,
|
|
pci_hose_write_config_word_via_dword,
|
|
mpc5200_write_config_dword);
|
|
|
|
udelay(1000);
|
|
|
|
#ifdef CONFIG_PCI_SCAN_SHOW
|
|
printf("PCI: Bus Dev VenId DevId Class Int\n");
|
|
#endif
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
#endif /* CONFIG_PCI && CONFIG_MPC5200 */
|
|
|