upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
498 lines
12 KiB
498 lines
12 KiB
/*
|
|
* Driver for Blackfin On-Chip MAC device
|
|
*
|
|
* Copyright (c) 2005-2008 Analog Device, Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <asm/clock.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach-common/bits/dma.h>
|
|
#include <asm/mach-common/bits/emac.h>
|
|
#include <asm/mach-common/bits/pll.h>
|
|
|
|
#include "bfin_mac.h"
|
|
|
|
#ifndef CONFIG_PHY_ADDR
|
|
# define CONFIG_PHY_ADDR 1
|
|
#endif
|
|
#ifndef CONFIG_PHY_CLOCK_FREQ
|
|
# define CONFIG_PHY_CLOCK_FREQ 2500000
|
|
#endif
|
|
|
|
#ifdef CONFIG_POST
|
|
#include <post.h>
|
|
#endif
|
|
|
|
#define RXBUF_BASE_ADDR 0xFF900000
|
|
#define TXBUF_BASE_ADDR 0xFF800000
|
|
#define TX_BUF_CNT 1
|
|
|
|
#define TOUT_LOOP 1000000
|
|
|
|
static ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
|
|
static ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
|
|
static u16 txIdx; /* index of the current RX buffer */
|
|
static u16 rxIdx; /* index of the current TX buffer */
|
|
|
|
/* DMAx_CONFIG values at DMA Restart */
|
|
static const union {
|
|
u16 data;
|
|
ADI_DMA_CONFIG_REG reg;
|
|
} txdmacfg = {
|
|
.reg = {
|
|
.b_DMA_EN = 1, /* enabled */
|
|
.b_WNR = 0, /* read from memory */
|
|
.b_WDSIZE = 2, /* wordsize is 32 bits */
|
|
.b_DMA2D = 0,
|
|
.b_RESTART = 0,
|
|
.b_DI_SEL = 0,
|
|
.b_DI_EN = 0, /* no interrupt */
|
|
.b_NDSIZE = 5, /* 5 half words is desc size */
|
|
.b_FLOW = 7 /* large desc flow */
|
|
},
|
|
};
|
|
|
|
static int bfin_miiphy_wait(void)
|
|
{
|
|
/* poll the STABUSY bit */
|
|
while (bfin_read_EMAC_STAADD() & STABUSY)
|
|
continue;
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_miiphy_read(const char *devname, uchar addr, uchar reg, ushort *val)
|
|
{
|
|
if (bfin_miiphy_wait())
|
|
return 1;
|
|
bfin_write_EMAC_STAADD(SET_PHYAD(addr) | SET_REGAD(reg) | STABUSY);
|
|
if (bfin_miiphy_wait())
|
|
return 1;
|
|
*val = bfin_read_EMAC_STADAT();
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_miiphy_write(const char *devname, uchar addr, uchar reg, ushort val)
|
|
{
|
|
if (bfin_miiphy_wait())
|
|
return 1;
|
|
bfin_write_EMAC_STADAT(val);
|
|
bfin_write_EMAC_STAADD(SET_PHYAD(addr) | SET_REGAD(reg) | STAOP | STABUSY);
|
|
return 0;
|
|
}
|
|
|
|
int bfin_EMAC_initialize(bd_t *bis)
|
|
{
|
|
struct eth_device *dev;
|
|
dev = malloc(sizeof(*dev));
|
|
if (dev == NULL)
|
|
hang();
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
strcpy(dev->name, "bfin_mac");
|
|
|
|
dev->iobase = 0;
|
|
dev->priv = 0;
|
|
dev->init = bfin_EMAC_init;
|
|
dev->halt = bfin_EMAC_halt;
|
|
dev->send = bfin_EMAC_send;
|
|
dev->recv = bfin_EMAC_recv;
|
|
dev->write_hwaddr = bfin_EMAC_setup_addr;
|
|
|
|
eth_register(dev);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
miiphy_register(dev->name, bfin_miiphy_read, bfin_miiphy_write);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_EMAC_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
int i;
|
|
int result = 0;
|
|
|
|
if (length <= 0) {
|
|
printf("Ethernet: bad packet size: %d\n", length);
|
|
goto out;
|
|
}
|
|
|
|
if (bfin_read_DMA2_IRQ_STATUS() & DMA_ERR) {
|
|
printf("Ethernet: tx DMA error\n");
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN); ++i) {
|
|
if (i > TOUT_LOOP) {
|
|
puts("Ethernet: tx time out\n");
|
|
goto out;
|
|
}
|
|
}
|
|
txbuf[txIdx]->FrmData->NoBytes = length;
|
|
memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length);
|
|
txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData;
|
|
bfin_write_DMA2_NEXT_DESC_PTR(txbuf[txIdx]->Dma);
|
|
bfin_write_DMA2_CONFIG(txdmacfg.data);
|
|
bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
|
|
|
|
for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) {
|
|
if (i > TOUT_LOOP) {
|
|
puts("Ethernet: tx error\n");
|
|
goto out;
|
|
}
|
|
}
|
|
result = txbuf[txIdx]->StatusWord;
|
|
txbuf[txIdx]->StatusWord = 0;
|
|
if ((txIdx + 1) >= TX_BUF_CNT)
|
|
txIdx = 0;
|
|
else
|
|
txIdx++;
|
|
out:
|
|
debug("BFIN EMAC send: length = %d\n", length);
|
|
return result;
|
|
}
|
|
|
|
static int bfin_EMAC_recv(struct eth_device *dev)
|
|
{
|
|
int length = 0;
|
|
|
|
for (;;) {
|
|
if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) {
|
|
length = -1;
|
|
break;
|
|
}
|
|
if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) {
|
|
printf("Ethernet: rx dma overrun\n");
|
|
break;
|
|
}
|
|
if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) {
|
|
printf("Ethernet: rx error\n");
|
|
break;
|
|
}
|
|
length = rxbuf[rxIdx]->StatusWord & 0x000007FF;
|
|
if (length <= 4) {
|
|
printf("Ethernet: bad frame\n");
|
|
break;
|
|
}
|
|
|
|
debug("%s: len = %d\n", __func__, length - 4);
|
|
|
|
NetRxPackets[rxIdx] = rxbuf[rxIdx]->FrmData->Dest;
|
|
NetReceive(NetRxPackets[rxIdx], length - 4);
|
|
bfin_write_DMA1_IRQ_STATUS(DMA_DONE | DMA_ERR);
|
|
rxbuf[rxIdx]->StatusWord = 0x00000000;
|
|
if ((rxIdx + 1) >= PKTBUFSRX)
|
|
rxIdx = 0;
|
|
else
|
|
rxIdx++;
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
/**************************************************************
|
|
*
|
|
* Ethernet Initialization Routine
|
|
*
|
|
*************************************************************/
|
|
|
|
/* MDC = SCLK / MDC_freq / 2 - 1 */
|
|
#define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1)
|
|
|
|
#ifndef CONFIG_BFIN_MAC_PINS
|
|
# ifdef CONFIG_RMII
|
|
# define CONFIG_BFIN_MAC_PINS P_RMII0
|
|
# else
|
|
# define CONFIG_BFIN_MAC_PINS P_MII0
|
|
# endif
|
|
#endif
|
|
|
|
static int bfin_miiphy_init(struct eth_device *dev, int *opmode)
|
|
{
|
|
const unsigned short pins[] = CONFIG_BFIN_MAC_PINS;
|
|
u16 phydat;
|
|
size_t count;
|
|
|
|
/* Enable PHY output */
|
|
bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
|
|
|
|
/* Set all the pins to peripheral mode */
|
|
peripheral_request_list(pins, "bfin_mac");
|
|
|
|
/* Odd word alignment for Receive Frame DMA word */
|
|
/* Configure checksum support and rcve frame word alignment */
|
|
bfin_write_EMAC_SYSCTL(RXDWA | RXCKS | SET_MDCDIV(MDC_FREQ_TO_DIV(CONFIG_PHY_CLOCK_FREQ)));
|
|
|
|
/* turn on auto-negotiation and wait for link to come up */
|
|
bfin_miiphy_write(dev->name, CONFIG_PHY_ADDR, MII_BMCR, BMCR_ANENABLE);
|
|
count = 0;
|
|
while (1) {
|
|
++count;
|
|
if (bfin_miiphy_read(dev->name, CONFIG_PHY_ADDR, MII_BMSR, &phydat))
|
|
return -1;
|
|
if (phydat & BMSR_LSTATUS)
|
|
break;
|
|
if (count > 30000) {
|
|
printf("%s: link down, check cable\n", dev->name);
|
|
return -1;
|
|
}
|
|
udelay(100);
|
|
}
|
|
|
|
/* see what kind of link we have */
|
|
if (bfin_miiphy_read(dev->name, CONFIG_PHY_ADDR, MII_LPA, &phydat))
|
|
return -1;
|
|
if (phydat & LPA_DUPLEX)
|
|
*opmode = FDMODE;
|
|
else
|
|
*opmode = 0;
|
|
|
|
bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
|
|
bfin_write_EMAC_VLAN1(EMAC_VLANX_DEF_VAL);
|
|
bfin_write_EMAC_VLAN2(EMAC_VLANX_DEF_VAL);
|
|
|
|
/* Initialize the TX DMA channel registers */
|
|
bfin_write_DMA2_X_COUNT(0);
|
|
bfin_write_DMA2_X_MODIFY(4);
|
|
bfin_write_DMA2_Y_COUNT(0);
|
|
bfin_write_DMA2_Y_MODIFY(0);
|
|
|
|
/* Initialize the RX DMA channel registers */
|
|
bfin_write_DMA1_X_COUNT(0);
|
|
bfin_write_DMA1_X_MODIFY(4);
|
|
bfin_write_DMA1_Y_COUNT(0);
|
|
bfin_write_DMA1_Y_MODIFY(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_EMAC_setup_addr(struct eth_device *dev)
|
|
{
|
|
bfin_write_EMAC_ADDRLO(
|
|
dev->enetaddr[0] |
|
|
dev->enetaddr[1] << 8 |
|
|
dev->enetaddr[2] << 16 |
|
|
dev->enetaddr[3] << 24
|
|
);
|
|
bfin_write_EMAC_ADDRHI(
|
|
dev->enetaddr[4] |
|
|
dev->enetaddr[5] << 8
|
|
);
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
u32 opmode;
|
|
int dat;
|
|
int i;
|
|
debug("Eth_init: ......\n");
|
|
|
|
txIdx = 0;
|
|
rxIdx = 0;
|
|
|
|
/* Initialize System Register */
|
|
if (bfin_miiphy_init(dev, &dat) < 0)
|
|
return -1;
|
|
|
|
/* Initialize EMAC address */
|
|
bfin_EMAC_setup_addr(dev);
|
|
|
|
/* Initialize TX and RX buffer */
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
rxbuf[i] = SetupRxBuffer(i);
|
|
if (i > 0) {
|
|
rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR = rxbuf[i]->Dma;
|
|
if (i == (PKTBUFSRX - 1))
|
|
rxbuf[i]->Dma[1].NEXT_DESC_PTR = rxbuf[0]->Dma;
|
|
}
|
|
}
|
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
|
txbuf[i] = SetupTxBuffer(i);
|
|
if (i > 0) {
|
|
txbuf[i - 1]->Dma[1].NEXT_DESC_PTR = txbuf[i]->Dma;
|
|
if (i == (TX_BUF_CNT - 1))
|
|
txbuf[i]->Dma[1].NEXT_DESC_PTR = txbuf[0]->Dma;
|
|
}
|
|
}
|
|
|
|
/* Set RX DMA */
|
|
bfin_write_DMA1_NEXT_DESC_PTR(rxbuf[0]->Dma);
|
|
bfin_write_DMA1_CONFIG(rxbuf[0]->Dma[0].CONFIG_DATA);
|
|
|
|
/* Wait MII done */
|
|
bfin_miiphy_wait();
|
|
|
|
/* We enable only RX here */
|
|
/* ASTP : Enable Automatic Pad Stripping
|
|
PR : Promiscuous Mode for test
|
|
PSF : Receive frames with total length less than 64 bytes.
|
|
FDMODE : Full Duplex Mode
|
|
LB : Internal Loopback for test
|
|
RE : Receiver Enable */
|
|
if (dat == FDMODE)
|
|
opmode = ASTP | FDMODE | PSF;
|
|
else
|
|
opmode = ASTP | PSF;
|
|
opmode |= RE;
|
|
#ifdef CONFIG_RMII
|
|
opmode |= TE | RMII;
|
|
#endif
|
|
/* Turn on the EMAC */
|
|
bfin_write_EMAC_OPMODE(opmode);
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_EMAC_halt(struct eth_device *dev)
|
|
{
|
|
debug("Eth_halt: ......\n");
|
|
/* Turn off the EMAC */
|
|
bfin_write_EMAC_OPMODE(0);
|
|
/* Turn off the EMAC RX DMA */
|
|
bfin_write_DMA1_CONFIG(0);
|
|
bfin_write_DMA2_CONFIG(0);
|
|
}
|
|
|
|
ADI_ETHER_BUFFER *SetupRxBuffer(int no)
|
|
{
|
|
ADI_ETHER_FRAME_BUFFER *frmbuf;
|
|
ADI_ETHER_BUFFER *buf;
|
|
int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */
|
|
int total_size = nobytes_buffer + RECV_BUFSIZE;
|
|
|
|
buf = (void *) (RXBUF_BASE_ADDR + no * total_size);
|
|
frmbuf = (void *) (RXBUF_BASE_ADDR + no * total_size + nobytes_buffer);
|
|
|
|
memset(buf, 0x00, nobytes_buffer);
|
|
buf->FrmData = frmbuf;
|
|
memset(frmbuf, 0xfe, RECV_BUFSIZE);
|
|
|
|
/* set up first desc to point to receive frame buffer */
|
|
buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
|
|
buf->Dma[0].START_ADDR = (u32) buf->FrmData;
|
|
buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */
|
|
buf->Dma[0].CONFIG.b_WNR = 1; /* Write to memory */
|
|
buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
|
buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */
|
|
buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */
|
|
|
|
/* set up second desc to point to status word */
|
|
buf->Dma[1].NEXT_DESC_PTR = buf->Dma;
|
|
buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum;
|
|
buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */
|
|
buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */
|
|
buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
|
buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */
|
|
buf->Dma[1].CONFIG.b_NDSIZE = 5; /* must be 0 when FLOW is 0 */
|
|
buf->Dma[1].CONFIG.b_FLOW = 7; /* stop */
|
|
|
|
return buf;
|
|
}
|
|
|
|
ADI_ETHER_BUFFER *SetupTxBuffer(int no)
|
|
{
|
|
ADI_ETHER_FRAME_BUFFER *frmbuf;
|
|
ADI_ETHER_BUFFER *buf;
|
|
int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */
|
|
int total_size = nobytes_buffer + RECV_BUFSIZE;
|
|
|
|
buf = (void *) (TXBUF_BASE_ADDR + no * total_size);
|
|
frmbuf = (void *) (TXBUF_BASE_ADDR + no * total_size + nobytes_buffer);
|
|
|
|
memset(buf, 0x00, nobytes_buffer);
|
|
buf->FrmData = frmbuf;
|
|
memset(frmbuf, 0x00, RECV_BUFSIZE);
|
|
|
|
/* set up first desc to point to receive frame buffer */
|
|
buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
|
|
buf->Dma[0].START_ADDR = (u32) buf->FrmData;
|
|
buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */
|
|
buf->Dma[0].CONFIG.b_WNR = 0; /* Read to memory */
|
|
buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
|
buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */
|
|
buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */
|
|
|
|
/* set up second desc to point to status word */
|
|
buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]);
|
|
buf->Dma[1].START_ADDR = (u32) & buf->StatusWord;
|
|
buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */
|
|
buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */
|
|
buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
|
buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */
|
|
buf->Dma[1].CONFIG.b_NDSIZE = 0; /* must be 0 when FLOW is 0 */
|
|
buf->Dma[1].CONFIG.b_FLOW = 0; /* stop */
|
|
|
|
return buf;
|
|
}
|
|
|
|
#if defined(CONFIG_POST) && defined(CONFIG_SYS_POST_ETHER)
|
|
int ether_post_test(int flags)
|
|
{
|
|
uchar buf[64];
|
|
int i, value = 0;
|
|
int length;
|
|
uint addr;
|
|
|
|
printf("\n--------");
|
|
bfin_EMAC_init(NULL, NULL);
|
|
/* construct the package */
|
|
addr = bfin_read_EMAC_ADDRLO();
|
|
buf[0] = buf[6] = addr;
|
|
buf[1] = buf[7] = addr >> 8;
|
|
buf[2] = buf[8] = addr >> 16;
|
|
buf[3] = buf[9] = addr >> 24;
|
|
addr = bfin_read_EMAC_ADDRHI();
|
|
buf[4] = buf[10] = addr;
|
|
buf[5] = buf[11] = addr >> 8;
|
|
buf[12] = 0x08; /* Type: ARP */
|
|
buf[13] = 0x06;
|
|
buf[14] = 0x00; /* Hardware type: Ethernet */
|
|
buf[15] = 0x01;
|
|
buf[16] = 0x08; /* Protocal type: IP */
|
|
buf[17] = 0x00;
|
|
buf[18] = 0x06; /* Hardware size */
|
|
buf[19] = 0x04; /* Protocol size */
|
|
buf[20] = 0x00; /* Opcode: request */
|
|
buf[21] = 0x01;
|
|
|
|
for (i = 0; i < 42; i++)
|
|
buf[i + 22] = i;
|
|
printf("--------Send 64 bytes......\n");
|
|
bfin_EMAC_send(NULL, buf, 64);
|
|
for (i = 0; i < 100; i++) {
|
|
udelay(10000);
|
|
if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) {
|
|
value = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (value == 0) {
|
|
printf("--------EMAC can't receive any data\n");
|
|
eth_halt();
|
|
return -1;
|
|
}
|
|
length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4;
|
|
for (i = 0; i < length; i++) {
|
|
if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) {
|
|
printf("--------EMAC receive error data!\n");
|
|
eth_halt();
|
|
return -1;
|
|
}
|
|
}
|
|
printf("--------receive %d bytes, matched\n", length);
|
|
bfin_EMAC_halt(NULL);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|