upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
299 lines
5.9 KiB
299 lines
5.9 KiB
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016 Marvell International Ltd.
|
|
*/
|
|
|
|
#include "armada-8040.dtsi" /* include SoC device tree */
|
|
|
|
/ {
|
|
model = "MACCHIATOBin-8040";
|
|
compatible = "marvell,armada8040-mcbin",
|
|
"marvell,armada8040";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = &cpm_i2c0;
|
|
i2c1 = &cpm_i2c1;
|
|
spi0 = &cps_spi1;
|
|
gpio0 = &ap_gpio0;
|
|
gpio1 = &cpm_gpio0;
|
|
gpio2 = &cpm_gpio1;
|
|
};
|
|
|
|
memory@00000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>;
|
|
};
|
|
|
|
simple-bus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_usb3h0_vbus: usb3-vbus0 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_xhci_vbus_pins>;
|
|
regulator-name = "reg-usb3h0-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <500000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Accessible over the mini-USB CON9 connector on the main board */
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ap_pinctl {
|
|
/*
|
|
* MPP Bus:
|
|
* eMMC [0-10]
|
|
* UART0 [11,19]
|
|
*/
|
|
/* 0 1 2 3 4 5 6 7 8 9 */
|
|
pin-func = < 1 1 1 1 1 1 1 1 1 1
|
|
1 3 0 0 0 0 0 0 0 3 >;
|
|
};
|
|
|
|
/* on-board eMMC */
|
|
&ap_sdhci0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_emmc_pins>;
|
|
bus-width= <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpm_pinctl {
|
|
/*
|
|
* MPP Bus:
|
|
* [0-31] = 0xff: Keep default CP0_shared_pins:
|
|
* [11] CLKOUT_MPP_11 (out)
|
|
* [23] LINK_RD_IN_CP2CP (in)
|
|
* [25] CLKOUT_MPP_25 (out)
|
|
* [29] AVS_FB_IN_CP2CP (in)
|
|
* [32,34] SMI
|
|
* [33] MSS power down
|
|
* [35-38] CP0 I2C1 and I2C0
|
|
* [39] MSS CKE Enable
|
|
* [40,41] CP0 UART1 TX/RX
|
|
* [42,43] XSMI (controls two 10G phys)
|
|
* [47] USB VBUS EN
|
|
* [48] FAN PWM
|
|
* [49] 10G port 1 interrupt
|
|
* [50] 10G port 0 interrupt
|
|
* [51] 2.5G SFP TX fault
|
|
* [52] PCIe reset out
|
|
* [53] 2.5G SFP mode
|
|
* [54] 2.5G SFP LOS
|
|
* [55] Micro SD card detect
|
|
* [56-61] Micro SD
|
|
* [62] CP1 SFI SFP FAULT
|
|
*/
|
|
/* 0 1 2 3 4 5 6 7 8 9 */
|
|
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0 7 0xa 7 2 2 2 2 0xa
|
|
7 7 8 8 0 0 0 0 0 0
|
|
0 0 0 0 0 0 0xe 0xe 0xe 0xe
|
|
0xe 0xe 0 >;
|
|
|
|
cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
|
|
marvell,pins = < 47 >;
|
|
marvell,function = <0>;
|
|
};
|
|
|
|
cpm_pcie_reset_pins: cpm-pcie-reset-pins {
|
|
marvell,pins = < 52 >;
|
|
marvell,function = <0>;
|
|
};
|
|
};
|
|
|
|
/* uSD slot */
|
|
&cpm_sdhci0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_sdhci_pins>;
|
|
bus-width= <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* PCIe x4 */
|
|
&cpm_pcie0 {
|
|
num-lanes = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_pcie_reset_pins>;
|
|
marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_HIGH>; /* GPIO[52] */
|
|
status = "okay";
|
|
};
|
|
|
|
&cpm_i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_i2c0_pins>;
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&cpm_i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_i2c1_pins>;
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&cpm_sata0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* uSD slot */
|
|
&cpm_sdhci0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpm_sdhci_pins>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpm_comphy {
|
|
/*
|
|
* CP0 Serdes Configuration:
|
|
* Lane 0: PCIe0 (x4)
|
|
* Lane 1: PCIe0 (x4)
|
|
* Lane 2: PCIe0 (x4)
|
|
* Lane 3: PCIe0 (x4)
|
|
* Lane 4: SFI (10G)
|
|
* Lane 5: SATA1
|
|
*/
|
|
phy0 {
|
|
phy-type = <PHY_TYPE_PEX0>;
|
|
};
|
|
phy1 {
|
|
phy-type = <PHY_TYPE_PEX0>;
|
|
};
|
|
phy2 {
|
|
phy-type = <PHY_TYPE_PEX0>;
|
|
};
|
|
phy3 {
|
|
phy-type = <PHY_TYPE_PEX0>;
|
|
};
|
|
phy4 {
|
|
phy-type = <PHY_TYPE_SFI>;
|
|
};
|
|
phy5 {
|
|
phy-type = <PHY_TYPE_SATA1>;
|
|
};
|
|
};
|
|
|
|
&cps_sata0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cps_usb3_0 {
|
|
vbus-supply = <®_usb3h0_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cps_utmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cps_pinctl {
|
|
/*
|
|
* MPP Bus:
|
|
* [0-5] TDM
|
|
* [6,7] CP1_UART 0
|
|
* [8] CP1 10G SFP LOS
|
|
* [9] CP1 10G PHY RESET
|
|
* [10] CP1 10G SFP TX Disable
|
|
* [11] CP1 10G SFP Mode
|
|
* [12] SPI1 CS1n
|
|
* [13] SPI1 MISO (TDM and SPI ROM shared)
|
|
* [14] SPI1 CS0n
|
|
* [15] SPI1 MOSI (TDM and SPI ROM shared)
|
|
* [16] SPI1 CLK (TDM and SPI ROM shared)
|
|
* [24] CP1 2.5G SFP TX Disable
|
|
* [26] CP0 10G SFP TX Fault
|
|
* [27] CP0 10G SFP Mode
|
|
* [28] CP0 10G SFP LOS
|
|
* [29] CP0 10G SFP TX Disable
|
|
* [30] USB Over current indication
|
|
* [31] 10G Port 0 phy reset
|
|
* [32-62] = 0xff: Keep default CP1_shared_pins:
|
|
*/
|
|
/* 0 1 2 3 4 5 6 7 8 9 */
|
|
pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x8 0x8 0x0 0x0
|
|
0x0 0x0 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
|
|
0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x0 0x0 0x0
|
|
0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
|
|
0xff 0xff 0xff>;
|
|
};
|
|
|
|
&cps_spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cps_spi1_pins>;
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0 0x200000>;
|
|
};
|
|
partition@400000 {
|
|
label = "Filesystem";
|
|
reg = <0x200000 0xce0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cps_comphy {
|
|
/*
|
|
* CP1 Serdes Configuration:
|
|
* Lane 0: SGMII1
|
|
* Lane 1: SATA 0
|
|
* Lane 2: USB HOST 0
|
|
* Lane 3: SATA1
|
|
* Lane 4: SFI (10G)
|
|
* Lane 5: SGMII3
|
|
*/
|
|
phy0 {
|
|
phy-type = <PHY_TYPE_SGMII1>;
|
|
phy-speed = <PHY_SPEED_1_25G>;
|
|
};
|
|
phy1 {
|
|
phy-type = <PHY_TYPE_SATA0>;
|
|
};
|
|
phy2 {
|
|
phy-type = <PHY_TYPE_USB3_HOST0>;
|
|
};
|
|
phy3 {
|
|
phy-type = <PHY_TYPE_SATA1>;
|
|
};
|
|
phy4 {
|
|
phy-type = <PHY_TYPE_SFI>;
|
|
};
|
|
phy5 {
|
|
phy-type = <PHY_TYPE_SGMII3>;
|
|
};
|
|
};
|
|
|